QuizTraffic rulesDenmark

This interesting quiz helps you test your knowledge in a clear and visual way. With easy multiple-choice questions, you can quickly build confidence and learn new facts while keeping it simple, interactive, and fun.


Which selector position is used when parking the vehicle?

601. Which selector position is used when parking the vehicle?

R (Reverse).
✓ P (Park).
D (Drive).
N (Neutral).

Select P (Park) when parking an automatic vehicle. Park locks the transmission, but the parking brake should also be applied to secure the vehicle.

Automatic gear selector with P, R, N and D positions
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this vehicle-control symbol indicate?

602. What does this vehicle-control symbol indicate?

Automatic brake hold.
Cruise control.
✓ Electronic parking brake.
Parking assistance.

This control operates the electronic parking brake. Pulling or pressing the switch applies or releases the parking brake, depending on the vehicle.

Electronic parking-brake switch and symbol
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
How should you position your vehicle beside a fuel pump?

603. How should you position your vehicle beside a fuel pump?

With the fuel hose stretched tightly across the vehicle.
Wherever there is space, regardless of the fuel-filler position.
As close to the pump as possible, even if access is restricted.
✓ With the fuel-filler side close enough for the hose to reach safely.

Position the vehicle so the fuel filler is close to the pump and the hose can reach without being stretched tightly across or around the vehicle. Stop within the designated refuelling area and leave enough space to use the pump safely.

Vehicle positioned beside a fuel pump
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if you realise you have put the wrong fuel in your vehicle?

604. What should you do if you realise you have put the wrong fuel in your vehicle?

Rev the engine briefly to mix the fuels.
Drive until the fuel warning light comes on.
Add the correct fuel and continue driving.
✓ Do not start the engine, and seek assistance.

If you have used the wrong fuel, do not start the engine. Starting it can circulate the incorrect fuel and cause further damage. If possible, avoid switching on the ignition and seek appropriate roadside or workshop assistance.

Fuel nozzle and the risk of misfuelling
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What can happen if you use the brakes continuously on a long descent?

605. What can happen if you use the brakes continuously on a long descent?

✓ The brakes may overheat and become less effective.
The brakes will automatically cool while being used.
Nothing, if the brake fluid level is correct.
The brakes may become more effective as they heat up.

Continuous braking can cause the brakes to overheat and fade, reducing braking performance. Use a lower gear to help control speed with engine braking.

Vehicle braking during a long descent
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you leave a much larger following distance on an icy road?

606. Why should you leave a much larger following distance on an icy road?

✓ Because stopping distances can be much longer.
To prevent ice from forming on the windscreen.
Because ice increases tyre wear.
To give the engine more time to warm up.

Tyres have much less grip on ice, so braking takes longer. Extra distance gives you more time to slow down safely.

Following distance between vehicles on an icy road
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should the seat-belt height be adjusted correctly?

607. Why should the seat-belt height be adjusted correctly?

To prevent the seat from moving.
✓ To position the shoulder belt correctly across the body.
To make the belt easier to unfasten.
To increase the length of the lap belt.

The seat-belt height adjustment helps position the shoulder belt correctly across the chest and shoulder. It should not run across the neck or under the arm.

Height adjustment for the shoulder section of a seat belt
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if exhaust fumes begin entering the car?

608. What should you do if exhaust fumes begin entering the car?

Open the windows and continue to your destination.
Turn up the heater to clear the fumes.
Ignore the fumes if no warning lights appear.
✓ Open the windows, stop safely, leave the vehicle, and seek assistance.

Exhaust gases may contain carbon monoxide, which is poisonous and may not be visible. The exhaust system should be inspected before the vehicle is used again.

Vehicle exhaust fumes and cabin ventilation
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you take care when parking a motorcycle on soft ground?

609. Why should you take care when parking a motorcycle on soft ground?

The brakes may lock while the motorcycle is parked.
✓ The stand may sink into the ground and the motorcycle could fall.
The chain may become too tight.
The tyres may immediately lose air pressure.

On soft or unstable ground, the side or centre stand can sink or move, causing the motorcycle to fall. Park on a firm, stable surface or use a suitable support under the stand when necessary.

Motorcycle stand resting on soft ground
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do when traffic is merging from another lane?

610. What should you do when traffic is merging from another lane?

✓ Adjust your speed and leave space when safe.
Move closer to the vehicle ahead to keep your lane clear.
Move into another lane without checking around you.
Maintain your speed and expect them to merge behind you.

When traffic merges, good observation and speed control help vehicles join safely without sudden braking or conflict.

Vehicle merging from an adjacent lane
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Which pedal is used to slow down or stop the vehicle?

611. Which pedal is used to slow down or stop the vehicle?

✓ The brake pedal.
The accelerator pedal.
The clutch pedal.
The footrest.

The brake pedal is used to reduce the vehicle's speed or bring it to a stop. In a manual vehicle, it is the middle pedal.

Brake pedal in the driver's footwell
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if you are unsure who has priority at a junction?

612. What should you do if you are unsure who has priority at a junction?

Proceed if the other driver appears to be slowing down.
Enter slowly so the other driver has time to react.
✓ Slow down and proceed only when it is safe.
Rely on eye contact and enter the junction first.

If priority is unclear, reduce speed, observe carefully, and avoid entering the junction until you are sure it is safe.

Vehicles approaching a junction with uncertain priority
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if there is no pavement?

613. What should you do if there is no pavement?

Always walk in the same direction as traffic.
Choose the side with the smoothest road surface.
Pay attention only to traffic approaching from behind.
✓ Walk where you can be seen and stay alert.

If there is no pavement, stay as far from traffic as possible and remain alert. The exact side of the road depends on local traffic rules.

Pedestrian walking beside a road without a pavement
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
You should always wear a seat belt, even on short trips.

614. You should always wear a seat belt, even on short trips.

False.
✓ True.

Seat belts reduce the risk of serious injury and should be worn on every trip, even short ones.

Driver wearing a seat belt for a car journey
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this dashboard symbol indicate?

615. What does this dashboard symbol indicate?

✓ Forward-collision warning.
Adaptive cruise control.
Electronic stability control.
Lane-departure warning.

This symbol relates to the forward-collision warning or automatic emergency braking system. It may warn the driver when the vehicle detects a risk of collision with traffic ahead.

Forward-collision warning symbol on the dashboard
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do when reversing with a trailer?

616. What should you do when reversing with a trailer?

Reverse quickly to keep the trailer straight.
✓ Reverse slowly and make small steering corrections.
Ask a guide to stand directly behind the trailer.
Watch only the trailer and ignore surrounding traffic.

Trailers react quickly to steering while reversing. Move slowly, observe carefully, and use a guide only from a safe visible position.

Vehicle reversing with a trailer
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should a motorcyclist do when approaching loose gravel?

617. What should a motorcyclist do when approaching loose gravel?

✓ Reduce speed before reaching it and use smooth controls.
Accelerate sharply to cross it quickly.
Brake hard while riding over it.
Turn suddenly to avoid every loose stone.

Loose gravel can significantly reduce tyre grip. Reduce speed before reaching it, keep the motorcycle as upright as practical, and avoid sudden braking, acceleration or steering while crossing the loose surface.

Motorcyclist approaching loose gravel
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Which vehicle combination is covered by driving licence BE?

618. Which vehicle combination is covered by driving licence BE?

✓ A category B vehicle with a trailer up to 3,500 kg.
A category C vehicle with a heavy trailer.
A goods vehicle up to 7,500 kg.
A bus with a trailer over 750 kg.

Category BE covers combinations consisting of a category B towing vehicle and a trailer or semi-trailer with a maximum authorised mass of no more than 3,500 kg. Lighter combinations may already be covered by category B.

Car and trailer covered by category BE
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What shape are most warning signs in Denmark?

619. What shape are most warning signs in Denmark?

✓ Triangle.
Rectangle.
Diamond.
Circle.

Most warning signs in Denmark are triangular.

Road warning signs and their shapes
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you normally do before starting an automatic vehicle?

620. What should you normally do before starting an automatic vehicle?

Leave the selector between two positions.
Select D and press the accelerator.
✓ Select P or N and press the brake pedal.
Select R and release the parking brake.

Before starting an automatic vehicle, make sure P (Park) or N (Neutral) is selected and press the brake pedal. Many automatic vehicles will only allow the engine to start when these conditions are met.

Gear selector and brake before starting an automatic vehicle
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
How can a heavy load affect stopping distance?

621. How can a heavy load affect stopping distance?

✓ It can increase the distance needed to stop.
It reduces the driver's reaction time.
It affects stopping distance only on steep roads.
It always shortens the stopping distance.

A heavily loaded vehicle has more mass and may require additional distance to slow down or stop safely.

Loaded vehicle and the space needed for braking
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you avoid travelling with the seatback excessively reclined?

622. Why should you avoid travelling with the seatback excessively reclined?

It can make the airbag deploy earlier.
It can cause the seat to slide forwards when braking.
It can prevent the head restraint from being adjusted.
✓ It can reduce how effectively the seat belt restrains you.

An excessively reclined seat can affect how the seat belt fits and restrains your body and may increase the risk of sliding under the lap belt in a collision. Sit in a reasonably upright position so the lap belt stays low across the hips and the shoulder belt lies correctly across the chest.

Vehicle seat with an excessively reclined backrest
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if your brakes feel less effective after driving through water?

623. What should you do if your brakes feel less effective after driving through water?

Increase speed to warm the brakes.
Brake hard several times to dry them quickly.
✓ Drive carefully and test them gently when safe.
Use only the parking brake until they dry.

Water can reduce braking performance. After driving through water, check the brakes gently when it is safe to do so.

Checking braking response after driving through water
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do before attempting to jump-start a vehicle?

624. What should you do before attempting to jump-start a vehicle?

✓ Check the owner's manual and make sure the connections are compatible.
Ignore battery damage if the terminals look clean.
Use any battery that physically fits the vehicle.
Connect the leads without checking their polarity.

Incorrect jump-starting can damage electrical systems, cause sparks, or make a battery explode. Connect the leads in the correct order before starting the vehicles, and follow the manufacturer's procedure exactly.

Preparing to jump-start a vehicle battery
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you avoid blocking a junction?

625. Why should you avoid blocking a junction?

Vehicles in a junction lose priority.
Your stopping distance becomes longer.
Junctions may only be entered at low speed.
✓ Other traffic needs space to move safely.

Blocking a junction can prevent vehicles, cyclists, or pedestrians from moving safely. Enter only when there is enough space to drive through and clear the junction.

Traffic blocking a road junction
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What is the main purpose of a booster seat?

626. What is the main purpose of a booster seat?

✓ To position the vehicle seat belt correctly on the child.
To replace the vehicle's seat belt completely.
To allow the child to sit without wearing a seat belt.
To move the child closer to the front seats.

A booster seat raises and positions a child so the vehicle seat belt fits correctly. The lap belt should sit low across the hips and the shoulder belt should pass across the chest and shoulder, rather than the neck or abdomen.

Child seated in a booster with a vehicle seat belt
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Which vehicle combination is covered by driving licence C1E?

627. Which vehicle combination is covered by driving licence C1E?

Any category C vehicle with a heavy trailer.
A category D1 minibus with a heavy trailer.
Any combination weighing more than 12,000 kg.
✓ A C1 vehicle with a heavy trailer, up to 12,000 kg combined.

Category C1E covers a category C1 vehicle with a trailer over 750 kg, provided the combination does not exceed 12,000 kg. It can also cover certain category B vehicles towing trailers over 3,500 kg, again with a combined maximum authorised mass not exceeding 12,000 kg.

Goods vehicle and trailer covered by category C1E
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you check before beginning a journey in severe winter weather?

628. What should you check before beginning a journey in severe winter weather?

Only whether you have enough fuel or charge.
✓ The weather, road conditions, tyres, fuel or charge, and emergency supplies.
Check whether other vehicles are using the roads.
Nothing extra if the vehicle has winter tyres.

Check whether the journey is necessary and prepare for delays or changing conditions. Suitable tyres, sufficient fuel or charge, warm clothing, and basic emergency supplies may be important.

Preparing a vehicle for a winter journey
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do with the steering wheel after completing a turn?

629. What should you do with the steering wheel after completing a turn?

Hold it in the turned position.
Turn it quickly in the opposite direction.
✓ Guide it smoothly back towards the straight-ahead position.
Release it completely and let it spin freely.

After completing a turn, guide the steering wheel smoothly back towards the straight-ahead position while maintaining control. Do not allow the wheel to spin freely through your hands.

Guiding the steering wheel back after a turn
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if another driver behaves aggressively towards you?

630. What should you do if another driver behaves aggressively towards you?

Follow them closely to show your disapproval.
Stop beside them so you can discuss the problem.
✓ Stay calm, avoid confrontation, and create more distance.
Respond with your horn and gestures.

If another driver behaves aggressively, do not retaliate or become involved in a confrontation. Stay calm, increase the distance between you, and let the other vehicle move away when possible. If you feel threatened, go to a safe public place and seek appropriate assistance.

Driver facing aggressive behaviour from another road user
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
How should you normally hold the steering wheel while driving?

631. How should you normally hold the steering wheel while driving?

With both hands together at the bottom.
With one hand resting on the gear lever.
✓ With both hands in a balanced position.
With one hand at the top of the wheel.

Hold the steering wheel with both hands in a balanced position so that you can steer smoothly and react quickly. A position around nine and three o'clock generally provides good control.

Driver holding the steering wheel with both hands
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Where should passengers get in or out of a vehicle when possible?

632. Where should passengers get in or out of a vehicle when possible?

From the driver's side in every situation.
✓ On the side away from moving traffic.
On the side closest to approaching traffic.
From the rear door nearest the centre of the road.

Passengers should get in or out on the side away from moving traffic whenever possible. This is particularly important for children, who may not recognise approaching traffic or other road users. Before opening any door, check that it is safe.

Passenger leaving a vehicle on the side away from traffic
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if your vehicle becomes stuck on a railway crossing?

633. What should you do if your vehicle becomes stuck on a railway crossing?

Try to restart the vehicle until help arrives.
Move everyone beside the vehicle while waiting.
✓ Get everyone out, move away, and contact the emergency services.
Stay inside the vehicle and call for assistance.

Move everyone well away from the tracks. Use the crossing emergency telephone or displayed contact information where available, or contact the emergency services immediately.

Vehicle stranded on a railway crossing
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if fog becomes so thick that you cannot see safely?

634. What should you do if fog becomes so thick that you cannot see safely?

Follow the vehicle ahead closely for guidance.
Use main beam and keep driving.
Stop immediately in the traffic lane.
✓ Slow down and stop in a safe location away from traffic if necessary.

If visibility becomes dangerously poor, find a safe place to stop rather than continuing without being able to see clearly.

Dense fog obscuring the road ahead
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do before making a turn?

635. What should you do before making a turn?

Turn as soon as the road ahead appears clear.
Check only the traffic directly ahead.
✓ Check mirrors, signal, and make sure it is safe.
Rely on other road users to slow down for you.

Before turning, check your mirrors, use your indicator, and make sure the turn can be made safely.

Driver preparing to turn at a junction
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
When should you select P (Park) in an automatic vehicle?

636. When should you select P (Park) in an automatic vehicle?

Before braking to a stop.
While the vehicle is still moving slowly.
Whenever you want to reduce speed.
✓ After the vehicle has come to a complete stop.

Select P (Park) only after the vehicle has come to a complete stop. Selecting Park while the vehicle is moving can damage the transmission.

Selecting Park after an automatic vehicle stops
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do after stopping because of a breakdown?

637. What should you do after stopping because of a breakdown?

Switch off the hazard lights once the vehicle has stopped.
✓ Apply the parking brake, switch off the engine, and use hazard lights.
Stand behind the vehicle to warn approaching traffic.
Leave the engine running and keep the vehicle in neutral.

Secure the vehicle so that it cannot move and use the hazard warning lights to alert approaching traffic. Where required and safe, place a warning triangle to give additional warning.

Broken-down vehicle with hazard warning lights
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if your vehicle begins to skid on ice?

638. What should you do if your vehicle begins to skid on ice?

Steer rapidly from side to side.
Accelerate sharply to regain traction.
Apply the parking brake to straighten the vehicle.
✓ Ease off the accelerator and steer smoothly in the direction you want to travel.

Avoid sudden braking or steering. Look where you want to go and use gentle controls while the tyres regain grip.

Vehicle skidding on an icy road
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should an unused roof rack or roof box be removed?

639. Why should an unused roof rack or roof box be removed?

It increases tyre pressure.
✓ It can increase aerodynamic drag and energy use.
It makes the steering wheel harder to turn.
It prevents the battery from charging.

An unused roof rack or roof box increases aerodynamic drag, particularly at higher speeds. Removing it when it is not needed can reduce fuel or energy consumption.

Roof rack or roof box fitted to a vehicle
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do when traffic lights are not working?

640. What should you do when traffic lights are not working?

✓ Proceed carefully and follow signs or priority rules.
Follow the vehicle ahead through the junction.
Wait for another driver to enter first, then follow.
Proceed if the junction appears clear.

If traffic lights are not working, slow down, observe carefully, and follow signs, road markings, or local priority rules.

Junction with traffic lights out of operation
AI-generated by Traffic-rules.com • WCIT • CC BY-SA