QuizTraffic rulesDenmark

Test your knowledge with our multiple-choice quiz. Learn from each answer and improve your understanding of the traffic rules and road signs of Denmark.

For informational purposes only. Always follow official regulations. Some content and images were created with AI assistance.


What may happen if you release the clutch too quickly when moving off?

351. What may happen if you release the clutch too quickly when moving off?

✓ The engine may stall.
The headlights may switch off.
The steering may lock.
The parking brake may engage.

Releasing the clutch pedal too quickly when moving off can cause the engine to stall. Release the clutch smoothly through the biting point while applying the accelerator progressively.

Clutch release and engine stalling when moving off
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should the driver's floor mat be properly secured?

352. Why should the driver's floor mat be properly secured?

✓ It could slide forwards and interfere with the pedals.
It could reduce the effectiveness of the airbags.
It could make the steering wheel harder to turn.
It could prevent the seat belt from locking.

A loose or incorrectly fitted floor mat can move into the pedal area and interfere with the accelerator, brake, or clutch. Make sure the driver's floor mat is correctly fitted, secured, and does not obstruct any pedal.

Driver's floor mat near the pedals
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you check shortly after securing a load?

353. What should you check shortly after securing a load?

Increase speed briefly to test the restraints.
Check the load only when you reach your destination.
✓ Stop safely and check that the restraints are still tight.
Assume the load is secure once the journey has started.

Loads and straps may settle or loosen after the journey begins. Recheck them at a safe stopping place.

Rechecking straps securing a vehicle's load
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you use a lower gear when driving downhill?

354. Why should you use a lower gear when driving downhill?

It increases tyre grip on steep roads.
✓ It helps control speed using engine braking.
It makes the steering lighter on descents.
It allows the vehicle to coast more freely.

Engine braking helps prevent the vehicle from gaining too much speed and reduces strain on the brakes.

Lower-gear selection for a downhill road
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why is it important to make yourself visible at night?

355. Why is it important to make yourself visible at night?

To avoid checking for approaching vehicles.
To ensure drivers can always stop in time.
To make it safe to walk closer to moving traffic.
✓ To make drivers see you more easily.

Bright or reflective clothing helps drivers notice pedestrians in low-light conditions.

Pedestrian visibility beside a road at night
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you press the clutch pedal fully when changing gear?

356. Why should you press the clutch pedal fully when changing gear?

✓ To disengage the engine fully from the transmission.
To increase engine speed.
To apply the brakes.
To lock the gear lever in position.

Pressing the clutch pedal fully disengages the engine from the transmission, allowing the gear to be changed smoothly and reducing unnecessary wear on the gearbox and clutch.

Clutch pedal pressed fully for a gear change
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Where should you go after safely leaving a disabled vehicle in a tunnel?

357. Where should you go after safely leaving a disabled vehicle in a tunnel?

Remain beside the vehicle and wait for assistance.
✓ To a protected emergency area or exit away from traffic.
Walk along the traffic lane toward the tunnel entrance.
Wait directly behind the vehicle where drivers can see you.

Move away from live traffic and use a marked emergency exit, refuge area, or protected walkway where available.

Leaving a disabled vehicle for a tunnel emergency area
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if your vehicle begins rolling backward on a steep incline?

358. What should you do if your vehicle begins rolling backward on a steep incline?

Let it roll backwards and try again.
✓ Apply the brake, secure the vehicle, and restart carefully.
Open the door and step out.
Accelerate while continuing to roll backward.

Stop the vehicle under control, apply the parking brake if necessary, and prepare to move away again safely.

Vehicle rolling backwards on a steep incline
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Which motorcycles are covered by driving licence A2?

359. Which motorcycles are covered by driving licence A2?

Motorcycles above 70 kW.
Motorcycles of any power.
Mopeds up to 45 km/h only.
✓ Motorcycles up to 35 kW within the A2 limits.

Category A2 covers motorcycles with power not exceeding 35 kW and a power-to-weight ratio not exceeding 0.2 kW/kg. The motorcycle must not be derived from a vehicle with more than double its power.

Motorcycle covered by category A2
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if you are approaching an animal-drawn vehicle?

360. What should you do if you are approaching an animal-drawn vehicle?

Overtake quickly before the animal changes direction.
Flash your headlights to encourage it to move aside.
Drive close behind until there is room to pass.
✓ Slow down and pass carefully with plenty of space.

Animals can be startled by noise or sudden movement. Reduce speed, keep distance, and pass only when it is safe.

Vehicle approaching an animal-drawn vehicle
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What is the general speed limit for cars on ordinary roads outside built-up areas in Denmark?

361. What is the general speed limit for cars on ordinary roads outside built-up areas in Denmark?

70 km/h.
✓ 80 km/h.
Other speed limit.
100 km/h.

In Denmark, the general speed limit for cars on ordinary roads outside built-up areas is 80 km/h, unless signs indicate otherwise.

Speed limits for cars outside built-up areas
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you notice the location of emergency exits in a tunnel?

362. Why should you notice the location of emergency exits in a tunnel?

Pedestrians may be crossing near them.
They show where overtaking is prohibited.
✓ You may need to reach one quickly during an emergency.
They mark areas where vehicles may stop temporarily.

Knowing where emergency exits and refuge areas are located can save valuable time during a fire, collision, or evacuation.

Emergency exit inside a road tunnel
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
How should a cyclist react to a pothole?

363. How should a cyclist react to a pothole?

Keep your speed and pass as close as possible.
✓ Check surroundings, reduce speed, and avoid it smoothly.
Focus only on the pothole and not the traffic around you.
Swerve around it as soon as you notice it.

Sudden swerving can place you in the path of traffic. Check your surroundings and change direction gradually.

Cyclist approaching a pothole
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should cyclists avoid riding in a large vehicle's blind spot?

364. Why should cyclists avoid riding in a large vehicle's blind spot?

Blind spots matter only when a vehicle is reversing.
The driver can always hear a cyclist beside the vehicle.
Cyclists must always stay behind large vehicles.
✓ The driver may not be able to see them.

Buses and trucks have large areas where the driver cannot see cyclists, especially beside the vehicle and near turns.

Cyclist in a large vehicle's blind spot
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you check before starting a motorcycle journey?

365. What should you check before starting a motorcycle journey?

✓ Tyres, brakes, lights, steering, and controls.
Only the tyres if the journey is long.
Only the fuel level and mirrors.
Nothing if the motorcycle was recently serviced.

Before riding, carry out a basic safety check. Check the tyres, brakes, lights, steering and controls, and inspect the drive chain, belt or other drive components where applicable. Finding a problem before setting off can prevent a breakdown or loss of control.

Checking a motorcycle before a journey
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does the SET function of cruise control normally do?

366. What does the SET function of cruise control normally do?

Returns to a previously stored speed.
Applies the brakes automatically.
✓ Stores the current speed as the cruising speed.
Switches cruise control off.

The SET function normally stores the vehicle's current speed as the cruise-control speed. Use it only when the road, traffic, and driving conditions are suitable.

SET button for storing a cruising speed
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do when meeting another vehicle on a narrow mountain road?

367. What should you do when meeting another vehicle on a narrow mountain road?

Maintain speed and pass as closely as possible.
✓ Slow down and use a safe passing place if necessary.
Drive onto the roadside without checking the surface.
Stop where the road is narrowest and wait.

Narrow mountain roads may not provide enough space for two vehicles. Reduce speed and cooperate to pass safely.

Vehicles meeting on a narrow mountain road
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
How should a motorcyclist brake in an emergency?

368. How should a motorcyclist brake in an emergency?

✓ Apply both brakes firmly and progressively.
Release both brakes before stopping.
Steer sharply while braking hard.
Use only the rear brake.

During emergency braking, use both brakes firmly and progressively while keeping the motorcycle as upright and stable as practical. Avoid sudden steering. If ABS is fitted, maintain firm braking pressure and allow the system to work.

Motorcyclist making an emergency stop
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you normally do with the gearbox during a longer stop in a manual vehicle?

369. What should you normally do with the gearbox during a longer stop in a manual vehicle?

Keep first gear selected with the clutch pressed.
✓ Select neutral and release the clutch.
Keep the accelerator pressed.
Select reverse gear.

During a longer stop, selecting neutral and releasing the clutch can reduce unnecessary strain on the clutch release mechanism. Keep the vehicle securely held with the brake or parking brake as appropriate.

Neutral gear selection during a longer stop
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What information is needed when requesting emergency assistance?

370. What information is needed when requesting emergency assistance?

✓ Your exact location, direction of travel, vehicle details, and the problem.
Your vehicle colour and approximate location.
Your name, destination, and planned route.
Your insurance details and last service date.

Road numbers, junctions, location markers, direction of travel, and a clear description of the incident help assistance reach you quickly.

Requesting help after a vehicle breakdown
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if a child runs onto the road ahead?

371. What should you do if a child runs onto the road ahead?

Accelerate to pass before the child moves further into the road.
Swerve immediately into the opposite lane.
✓ Brake firmly and be prepared to stop.
Sound your horn and continue driving.

Children can act unpredictably. Brake firmly, stay alert, and be prepared for more children to follow.

Child entering the road ahead of a vehicle
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
How should a three-point seat belt normally be worn during pregnancy?

372. How should a three-point seat belt normally be worn during pregnancy?

With the shoulder belt placed behind the back.
Using only the lap section of the seat belt.
Loosely fitted so it does not press against the body.
✓ With the lap belt low across the hips and the shoulder belt across the chest.

During pregnancy, a three-point seat belt should be worn correctly. The lap belt should sit low across the hips, below the abdomen, while the shoulder belt should pass across the chest and to the side of the abdomen. The belt should fit snugly and should not be placed behind the back or under the arm.

Seat-belt positioning during pregnancy
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this dashboard symbol indicate?

373. What does this dashboard symbol indicate?

Engine-temperature warning.
✓ Low engine oil level.
Low oil pressure.
Charging-system warning.

This symbol indicates that the engine oil level is low. Check the oil level according to the manufacturer's instructions and add the correct oil if necessary.

Low oil-level warning symbol on the dashboard
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do before opening your car door near traffic?

374. What should you do before opening your car door near traffic?

✓ Check for cyclists, pedestrians, and vehicles.
Signal before opening the door without checking behind.
Check only for vehicles, not cyclists or pedestrians.
Check only the mirror before opening the door.

Before opening a car door, check carefully for cyclists, pedestrians, and vehicles to avoid causing a collision.

Checking for passing road users before opening a car door
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you expect if the engine suddenly stalls while the vehicle is moving?

375. What should you expect if the engine suddenly stalls while the vehicle is moving?

The steering and brakes will stop working completely.
Power assistance will continue working normally.
✓ Steering and braking may require more effort, so move to a safe place.
The steering will become lighter as the vehicle slows.

Power assistance may be reduced when the engine stops. Keep control, use the hazard lights if needed, and steer toward a safe stopping area.

Driver responding to an engine stall while moving
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
How should the interior rear-view mirror be adjusted?

376. How should the interior rear-view mirror be adjusted?

To show mainly the rear seats.
To show the driver's face.
To point towards the left door mirror.
✓ To give a clear view through the rear window.

Adjust the interior rear-view mirror before driving so that you have a clear view through the rear window without needing to move your head significantly.

Adjusting the interior rear-view mirror
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if the brake pedal feels unusually soft?

377. What should you do if the brake pedal feels unusually soft?

✓ Stop safely and have the braking system inspected.
Use only the parking brake while driving.
Reduce the tyre pressure to improve braking.
Press the accelerator harder before braking.

A soft brake pedal or increased stopping distance may indicate a serious brake fault. Do not continue driving normally until the system has been checked.

Brake-pedal check for a possible braking fault
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this dashboard symbol indicate?

378. What does this dashboard symbol indicate?

Low washer fluid.
✓ Low engine coolant level.
Engine overheating.
Low tyre pressure.

This symbol indicates that the engine coolant level is low. Check the coolant level when the engine is cool and refill it with the correct coolant if necessary.

Low coolant-level warning symbol on the dashboard
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What is the minimum licence for a bus designed for more than 16 passengers?

379. What is the minimum licence for a bus designed for more than 16 passengers?

✓ Licence D.
Licence B.
Licence D1E.
Licence C.

Category D1 is limited to vehicles designed for no more than 16 passengers in addition to the driver. A bus designed for more than 16 passengers therefore requires category D.

Bus designed for more than 16 passengers
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you avoid resting your foot on the clutch pedal while driving?

380. Why should you avoid resting your foot on the clutch pedal while driving?

It can apply the parking brake.
It can lock the steering.
It can increase tyre pressure.
✓ It can cause unnecessary clutch wear.

Resting your foot on the clutch pedal can apply slight pressure to the clutch mechanism and cause unnecessary wear. Keep your left foot off the clutch when it is not needed.

Foot position near the clutch pedal
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you hold the steering wheel firmly during strong gusts?

381. Why should you hold the steering wheel firmly during strong gusts?

To reduce braking distance.
To make the power steering work better.
To keep the suspension level.
✓ To maintain control if the vehicle is pushed.

A firm but relaxed grip helps you respond safely to sudden changes caused by wind.

Driver holding the steering wheel during strong gusts
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if animals are gathered beside a narrow rural road?

382. What should you do if animals are gathered beside a narrow rural road?

Sound your horn so the animals move away.
Drive close to prevent them entering your lane.
✓ Reduce speed and pass only when there is enough space.
Maintain speed because the animals are beside the road.

Animals beside a narrow road may step into your path. Slow down and leave as much safe space as possible.

Animals gathered beside a narrow rural road
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you never reverse or make a U-turn inside a tunnel unless directed?

383. Why should you never reverse or make a U-turn inside a tunnel unless directed?

✓ It can cause a serious collision with approaching traffic.
Tunnel ventilation works only in the normal direction of travel.
A U-turn can confuse the tunnel's traffic monitoring system.
Reversing can interfere with the tunnel lighting.

Other drivers may not expect a vehicle to reverse or turn around. Only change direction when instructed by police or tunnel staff.

Vehicle manoeuvring inside a road tunnel
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does the AUTO setting on the lighting control do?

384. What does the AUTO setting on the lighting control do?

✓ It switches the headlights on or off automatically when needed.
It switches on the front fog lights.
It keeps the main beam switched on.
It switches on the hazard warning lights.

The AUTO lighting setting allows the vehicle to switch its exterior lights on or off automatically according to ambient light conditions. The driver remains responsible for ensuring that the correct lights are being used.

AUTO setting on the vehicle's lighting control
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why can main-beam headlights make driving in fog more difficult?

385. Why can main-beam headlights make driving in fog more difficult?

Main beam reduces the effectiveness of the fog lights.
✓ The light can reflect off fog droplets and reduce visibility.
Main beam makes interior lights less effective.
The brighter light makes the windscreen mist more quickly.

Main beam can reflect back from fog and create glare, making it harder to see the road ahead.

Headlight glare reflected by fog
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What is the minimum licence for a goods vehicle over 7,500 kg maximum authorised mass?

386. What is the minimum licence for a goods vehicle over 7,500 kg maximum authorised mass?

Licence C1E.
Licence D.
Licence C1.
✓ Licence C.

Category C1 is limited to vehicles with a maximum authorised mass not exceeding 7,500 kg. A goods vehicle above this limit requires category C.

Goods vehicle above 7,500 kg maximum authorised mass
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What is the best place to cross the road?

387. What is the best place to cross the road?

Between parked vehicles if traffic appears quiet.
Near a bend if approaching traffic seems slow.
✓ At a designated crossing.
At the shortest point, even if visibility is limited.

Use a designated crossing whenever possible. It is usually the safest place to cross the road.

Designated crossing for pedestrians
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Who generally has priority at an uncontrolled intersection in Denmark?

388. Who generally has priority at an uncontrolled intersection in Denmark?

Traffic approaching from the left.
✓ Traffic approaching from the right.
The largest vehicle.
The vehicle travelling fastest.

At an uncontrolled intersection in Denmark, you generally give way to traffic approaching from the right.

Vehicles approaching an uncontrolled junction from different directions
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
How should you normally apply the brake pedal for a smooth stop?

389. How should you normally apply the brake pedal for a smooth stop?

Use the parking brake instead.
Pump the pedal repeatedly.
✓ Apply pressure progressively.
Press it as hard as possible immediately.

For normal braking, apply the brake pedal progressively and smoothly. As the vehicle comes to a stop, easing the pressure slightly can help avoid a sudden jerk.

Progressive brake-pedal pressure for a smooth stop
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
When should you consider delaying a journey because of severe weather?

390. When should you consider delaying a journey because of severe weather?

✓ When conditions make driving unsafe.
Whenever the weather forecast mentions rain.
Never, if the vehicle is in good condition.
Only when roads are closed.

Severe weather can create dangerous conditions. Delaying a journey may be the safest choice when risks are too high.

Severe weather making a road journey hazardous
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do with the clutch during emergency braking in a manual vehicle?

391. What should you do with the clutch during emergency braking in a manual vehicle?

Release it suddenly.
Pump it repeatedly.
✓ Press it fully while maintaining firm brake pressure.
Keep it partly pressed.

During emergency braking in a manual vehicle, maintain firm pressure on the brake and press the clutch pedal fully so the engine does not stall as the vehicle slows. Do not reduce braking pressure while operating the clutch.

Brake and clutch operation during an emergency stop
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Are moped riders generally required to wear a helmet in Denmark?

392. Are moped riders generally required to wear a helmet in Denmark?

No.
✓ Yes.

Moped riders in Denmark are generally required to wear an approved helmet.

Moped rider wearing a helmet
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you reduce speed when approaching roadworks?

393. Why should you reduce speed when approaching roadworks?

✓ Road workers, narrow lanes, and unexpected hazards may be present.
To reduce wear on the vehicle suspension.
To reduce exhaust gases near construction sites.
You should not reduce speed near roadworks.

Roadworks can involve workers, machinery, changing lane layouts, and uneven surfaces. Lower speed gives you more time to react.

Vehicle approaching a roadworks area
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you reduce speed in fog?

394. Why should you reduce speed in fog?

✓ Because you have less time to react to hazards you cannot see.
To reduce fuel consumption.
To prevent moisture from entering the engine.
To prevent the windscreen from misting.

Fog can hide obstacles, pedestrians, and other vehicles. Lower speed gives you more time to react.

Fog limiting a driver's view ahead
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Which motorcycles are covered by driving licence A1?

395. Which motorcycles are covered by driving licence A1?

Motorcycles up to 35 kW.
✓ Motorcycles up to 125 cm³ and 11 kW.
Mopeds only.
Motorcycles of any power.

Category A1 covers motorcycles with an engine capacity of no more than 125 cm³, power of no more than 11 kW, and a power-to-weight ratio of no more than 0.1 kW/kg. It also covers powered tricycles up to 15 kW.

Light motorcycle covered by category A1
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why is counting drinks an unreliable way to decide whether you can drive?

396. Why is counting drinks an unreliable way to decide whether you can drive?

✓ Drink strength, serving size, and individual effects can vary.
The number of drinks matters more than their strength.
One drink affects every person in the same way.
Food makes each drink count as less alcohol.

Alcohol concentration and serving sizes vary, and factors such as body size, food, medication, and time can affect impairment.

Alcoholic drinks with different strengths and serving sizes
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you look well ahead while driving?

397. Why should you look well ahead while driving?

✓ To identify developing hazards early and gain more time to react.
To concentrate only on traffic in your lane.
To maintain the same speed in every situation.
To avoid checking your mirrors as often.

Looking well ahead helps you identify developing hazards early, such as slowing traffic, pedestrians, junctions, or changing road conditions. Earlier detection gives you more time to assess the situation and respond smoothly and safely.

Driver observing the road and traffic ahead
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Which control is normally used to switch on the dipped headlights?

398. Which control is normally used to switch on the dipped headlights?

The rear-window demister.
✓ The lighting control.
The windscreen-wiper control.
The hazard warning switch.

The lighting control is normally used to switch on the dipped headlights. Depending on the vehicle, it may be a rotary switch or part of a lighting stalk.

Lighting control for switching on dipped headlights
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this dashboard symbol indicate?

399. What does this dashboard symbol indicate?

ABS fault.
Low tyre pressure.
Brake-system fault.
✓ Brake-pad wear warning.

This symbol indicates that the brake pads may be worn and should be inspected. Continuing to drive with excessively worn brake pads can reduce braking performance and damage other brake components.

Brake-pad wear warning symbol on the dashboard
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should a motorcycle helmet be worn correctly and securely fastened?

400. Why should a motorcycle helmet be worn correctly and securely fastened?

To improve the rider's hearing in traffic.
✓ To reduce the risk of serious head injury in a collision.
To make the motorcycle easier to balance.
To prevent the motorcycle from skidding.

A correctly fitted and securely fastened motorcycle helmet helps protect the rider's head and can reduce the risk and severity of head injury in a collision or fall.

Motorcyclist wearing a securely fastened helmet
AI-generated by Traffic-rules.com • WCIT • CC BY-SA