Support us

QuizTraffic rulesSpain

This interesting quiz helps you test your knowledge in a clear and visual way. With easy multiple-choice questions, you can quickly build confidence and learn new facts while keeping it simple, interactive, and fun.

Traffic signs
Traffic rules
Spain
True/false 17 Spain 34 Car controls 109 Dashboard lights 40 Priority rules 9 Pedestrians 19 Cyclists 20 Driving licence 40 Show all 641
What does this vehicle-control symbol indicate?

251. What does this vehicle-control symbol indicate?

Mirror adjustment.
Steering-wheel adjustment.
✓ Seat adjustment.
Seat heating.

This control adjusts the position of the seat. Depending on the vehicle, it may move the seat forwards or backwards, raise or lower it, or change the backrest angle.

Control for adjusting the driver's seat
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you normally do with the accelerator when changing to a higher gear?

252. What should you normally do with the accelerator when changing to a higher gear?

Press it fully while pressing the clutch.
Press the brake pedal instead.
Keep it pressed at the same position.
✓ Ease off it while pressing the clutch.

When changing to a higher gear, ease off the accelerator as you press the clutch and select the next gear. Release the clutch smoothly and then apply the accelerator progressively.

Changing to a higher gear in a manual vehicle
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What is the minimum licence for a goods vehicle over 7,500 kg maximum authorised mass?

253. What is the minimum licence for a goods vehicle over 7,500 kg maximum authorised mass?

Licence B.
Licence D.
✓ Licence C.
Licence C1.

Category C1 is limited to vehicles with a maximum authorised mass not exceeding 7,500 kg. A goods vehicle above this limit requires category C.

Goods vehicle above 7,500 kg maximum authorised mass
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you avoid using a phone while driving?

254. Why should you avoid using a phone while driving?

Because it can cause road rage.
Because it can make your reactions faster.
Because it can disable the cruise control system.
✓ Because it distracts you from the road.

Using a phone while driving reduces attention, reaction time, and control of the vehicle. A hands-free system may reduce the need to handle the phone, but the conversation itself can still be distracting.

Phone distracting a driver from the road
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do when walking near a driveway?

255. What should you do when walking near a driveway?

✓ Watch for vehicles entering or leaving.
Cross the driveway quickly without checking.
Rely on engine noise to warn you of vehicles.
Assume vehicles will stop before crossing your path.

Vehicles may enter or leave driveways suddenly. Stay alert and check for moving vehicles.

Pedestrian passing a driveway entrance
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you slow down before a sharp bend?

256. Why should you slow down before a sharp bend?

To make the bend easier to see from a distance.
To make the steering feel lighter.
✓ To keep control of the vehicle.
To prevent other vehicles from overtaking.

Sharp bends reduce your view and can make the vehicle harder to control, so you should slow down before entering the bend.

Vehicle approaching a sharp bend
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if your windscreen becomes covered with mud or spray?

257. What should you do if your windscreen becomes covered with mud or spray?

Switch off the wipers until the windscreen dries.
Continue driving and wait for the spray to clear.
✓ Slow down and use the washers and wipers to restore clear vision.
Increase speed so the airflow clears the windscreen.

Clear visibility is essential. Slow down safely and use your washers and wipers until you can see the road clearly again.

Mud and spray obscuring a vehicle's windscreen
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
When should you select reverse gear in a manual vehicle?

258. When should you select reverse gear in a manual vehicle?

✓ After the vehicle has come to a complete stop.
Before pressing the clutch pedal.
While the vehicle is still moving forward slowly.
Whenever you want to reduce speed.

Select reverse gear only after the vehicle has come to a complete stop. Press the clutch fully before selecting reverse to avoid unnecessary wear or damage to the transmission.

Selecting reverse gear in a stationary manual vehicle
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
You should signal before turning or changing lanes.

259. You should signal before turning or changing lanes.

✓ True.
False.

A clear signal helps other road users understand your intentions, but you must still check that the manoeuvre can be made safely.

Vehicle signalling before a turn
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if a friend who has been drinking wants to drive?

260. What should you do if a friend who has been drinking wants to drive?

Let them drive slowly on quiet roads.
✓ Encourage them not to drive and arrange safe transport.
Let them drive if they say they feel sober.
Give them coffee and wait a short while.

Preventing an impaired person from driving can protect them, their passengers, and other road users. Arrange a sober driver, taxi, public transport, or accommodation.

Friends discussing safe transport after drinking
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should unnecessary engine idling be avoided?

261. Why should unnecessary engine idling be avoided?

It makes the tyres lose pressure.
✓ It uses fuel without moving the vehicle.
It immediately damages the brakes.
It prevents the battery from charging.

An idling combustion engine uses fuel while the vehicle is stationary. Avoid unnecessary idling where it is safe and appropriate to switch the engine off, taking account of the vehicle manufacturer's instructions and local rules.

Stationary vehicle with its engine idling
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Who should always wear a seat belt?

262. Who should always wear a seat belt?

Only people in the front seats.
Only children and young passengers.
✓ Everyone in the vehicle.
Only the driver.

Seat belts greatly reduce the risk of serious injury in a crash and should be worn by everyone in the vehicle.

Vehicle occupants wearing seat belts
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
You should adjust your mirrors before you start driving.

263. You should adjust your mirrors before you start driving.

✓ True.
False.

Properly adjusted mirrors improve visibility and help you monitor traffic around your vehicle.

Driver adjusting a mirror before setting off
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What is the general motorway speed limit for cars in Spain?

264. What is the general motorway speed limit for cars in Spain?

110 km/h.
130 km/h.
✓ 120 km/h.
100 km/h.

The general motorway speed limit for cars in Spain is 120 km/h, unless signs indicate otherwise.

Motorway speed limits for cars
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
How should a cyclist react to a pothole?

265. How should a cyclist react to a pothole?

✓ Check surroundings, reduce speed, and avoid it smoothly.
Swerve around it as soon as you notice it.
Keep your speed and pass as close as possible.
Brake hard just before reaching the pothole.

Sudden swerving can place you in the path of traffic. Check your surroundings and change direction gradually.

Cyclist approaching a pothole
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Should the legal alcohol limit be treated as a safe target?

266. Should the legal alcohol limit be treated as a safe target?

Yes, if you know exactly how much you have drunk.
Yes, because impairment begins only above the limit.
✓ No, impairment can begin before the legal limit is reached.
Yes, if you feel completely sober.

A legal limit is an enforcement threshold, not a recommended drinking level. Even a small amount of alcohol can affect driving performance.

Alcohol consumption and the limits of safe driving
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do before opening your car door near traffic?

267. What should you do before opening your car door near traffic?

✓ Check for cyclists, pedestrians, and vehicles.
Check only the mirror before opening the door.
Open the door slowly and expect traffic to avoid you.
Signal before opening the door without checking behind.

Before opening a car door, check carefully for cyclists, pedestrians, and vehicles to avoid causing a collision.

Checking for passing road users before opening a car door
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do before changing lanes?

268. What should you do before changing lanes?

Speed up and move over before nearby traffic catches up.
Check only the lane directly beside you.
Rely on your mirrors without checking the blind spot.
✓ Check your mirrors and blind spot.

Always check your mirrors, look over your shoulder if necessary, and make sure it is safe before changing lanes.

Driver checking surrounding traffic before changing lanes
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you normally do after completing an overtake?

269. What should you normally do after completing an overtake?

✓ Return to the normal driving lane when it is safe.
Move back immediately in front of the vehicle you passed.
Remain in the overtaking lane until another vehicle approaches.
Stay beside the vehicle until there is another reason to change lanes.

After overtaking, return to the normal driving lane when you have passed the other vehicle by a safe distance. Check your mirrors, signal when appropriate, and avoid moving back too soon.

Vehicle returning to its lane after overtaking
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do when approaching stationary or slow-moving traffic on a motorway?

270. What should you do when approaching stationary or slow-moving traffic on a motorway?

✓ Reduce speed early and be prepared to stop.
Brake only when the vehicle ahead begins braking.
Maintain speed until you are close to the queue.
Change lanes immediately to avoid slowing down.

Motorway queues can appear suddenly. Early braking gives following traffic more time to react.

Slow-moving traffic ahead on a motorway
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why is a larger following distance needed at motorway speeds?

271. Why is a larger following distance needed at motorway speeds?

It keeps the engine from working too hard.
✓ You need more distance to react and stop safely.
It makes the vehicle easier to steer.
It prevents the tyres from becoming too warm.

At higher speeds, you travel farther during your reaction time and need more distance to brake. A larger gap gives you more time and space to stop safely.

Following distance between vehicles on a motorway
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do when traffic lights change to amber as you approach?

272. What should you do when traffic lights change to amber as you approach?

Continue at the same speed if the junction looks clear.
✓ Stop if you can do so safely.
Stop even if this requires sudden harsh braking.
Accelerate to pass before the light turns red.

An amber light warns that the signal is changing. Stop if it is safe, but avoid sudden braking that could cause danger behind you.

Vehicle approaching an amber traffic light
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this dashboard symbol indicate?

273. What does this dashboard symbol indicate?

Rear fog lights.
✓ Hazard warning lights.
Emergency braking.
Direction indicators.

This symbol indicates the hazard warning lights. When activated, all direction indicators flash simultaneously to warn other road users of a hazard or unusual situation.

Hazard warning light symbol on the dashboard
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Speed limits only apply when there is heavy traffic.

274. Speed limits only apply when there is heavy traffic.

True.
✓ False.

Speed limits apply at all times unless a different limit is clearly indicated.

Speed-limit sign beside a road
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What is the purpose of cruise control?

275. What is the purpose of cruise control?

To prevent the vehicle from exceeding any speed limit.
✓ To maintain a selected speed without continuous accelerator use.
To steer the vehicle automatically.
To keep a fixed distance from the vehicle ahead.

Cruise control can maintain a selected speed without the driver continuously pressing the accelerator. The driver must remain attentive and ready to brake or take control when necessary.

Vehicle cruise-control buttons and symbol
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should cyclists do after a collision or hard fall?

276. What should cyclists do after a collision or hard fall?

✓ Check yourself and inspect the bicycle before riding again.
Test the bicycle by riding it before checking for damage.
Continue if you feel fine and the bicycle looks normal.
Check only the bicycle and ignore minor injuries.

A fall can damage the brakes, wheels, frame, handlebars, or helmet. Injuries may also not be immediately obvious.

Checking a bicycle after a fall or collision
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do when approaching a curve with poor visibility?

277. What should you do when approaching a curve with poor visibility?

Maintain your speed if the road ahead appears clear.
✓ Slow down and stay in your lane.
Brake only after entering the curve if necessary.
Move slightly toward the centre for a better view.

A curve can hide oncoming traffic, obstacles, cyclists, or pedestrians. Reduce speed and keep a safe position.

Road bend with a restricted view ahead
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Where should you go after safely leaving a disabled vehicle in a tunnel?

278. Where should you go after safely leaving a disabled vehicle in a tunnel?

Wait directly behind the vehicle where drivers can see you.
Walk along the traffic lane toward the tunnel entrance.
Stay close to the vehicle until traffic starts moving.
✓ To a protected emergency area or exit away from traffic.

Move away from live traffic and use a marked emergency exit, refuge area, or protected walkway where available.

Leaving a disabled vehicle for a tunnel emergency area
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should hard braking be avoided while a motorcycle is leaning in a bend?

279. Why should hard braking be avoided while a motorcycle is leaning in a bend?

It makes the motorcycle turn more sharply.
It increases tyre pressure immediately.
✓ It can reduce stability and available tyre grip.
It can make the engine overheat.

When a motorcycle is leaning, the tyres are already using grip to turn. Hard braking can demand additional grip and may reduce stability. Whenever possible, adjust speed before the bend and use smooth, controlled inputs while cornering.

Motorcycle leaning while travelling through a bend
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if the engine-temperature warning shows overheating?

280. What should you do if the engine-temperature warning shows overheating?

Ignore it if the engine still sounds normal.
Open the coolant cap immediately to release heat.
Increase engine speed to improve coolant circulation.
✓ Stop safely, switch off the engine, and allow it to cool.

Continuing to drive an overheating vehicle can cause severe damage. Allow the engine to cool and follow the manufacturer's instructions.

Engine-overheating warning on the dashboard
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you keep your windscreen clean?

281. Why should you keep your windscreen clean?

To prevent windscreen damage.
To make the headlights brighter.
To improve engine cooling.
✓ To see the road clearly.

A clean windscreen gives you a clear view of the road, signs, pedestrians, cyclists, and other vehicles.

Cleaning a windscreen to improve the driver's view
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this dashboard symbol indicate?

282. What does this dashboard symbol indicate?

Charging-system warning.
✓ Engine-management warning.
Engine-temperature warning.
Oil-pressure warning.

This symbol indicates a fault detected by the engine-management or emissions-control system. If it remains illuminated while driving, the vehicle should be checked according to the manufacturer's instructions.

Engine-management warning symbol on the dashboard
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do when driving in strong wind?

283. What should you do when driving in strong wind?

✓ Hold the steering wheel firmly and reduce speed if needed.
Open the windows to improve aerodynamics.
Use main beam to make your vehicle more visible.
Increase speed so the vehicle is less affected by gusts.

Strong wind can affect vehicle control, especially near open areas, bridges, large vehicles, cyclists, and motorcyclists.

Driver controlling a vehicle in strong wind
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
It is safe to look at your phone briefly while driving.

284. It is safe to look at your phone briefly while driving.

True.
✓ False.

Using your phone while driving is distracting and dangerous, even for a very short moment.

Driver glancing at a phone while driving
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if an unusual vibration develops in the steering wheel?

285. What should you do if an unusual vibration develops in the steering wheel?

Increase speed until the vibration becomes less noticeable.
✓ Reduce speed and have the tyres, wheels, and steering checked.
Reduce the tyre pressure slightly to smooth the ride.
Keep driving if the vehicle still steers normally.

An unusual vibration may indicate tyre damage, wheel imbalance, loose components, or another mechanical fault. Reduce speed and arrange an inspection.

Driver experiencing vibration through the steering wheel
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if a motorcycle's drive chain is too loose?

286. What should you do if a motorcycle's drive chain is too loose?

Lubricate it and ignore the loose tension.
✓ Adjust it correctly or have it checked before riding.
Tighten it as much as possible.
Keep riding if the motorcycle still moves normally.

A loose drive chain can affect power transmission, damage components, or come off the sprockets. The chain should have the correct tension and lubrication specified by the motorcycle manufacturer. A chain that is too tight can also cause damage.

Loose drive chain on a motorcycle
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if the windscreen wipers stop working during heavy rain?

287. What should you do if the windscreen wipers stop working during heavy rain?

Open a side window and continue driving carefully.
Use the washer fluid repeatedly to clear the windscreen.
Follow another vehicle closely so you can see its lights.
✓ Reduce speed and stop in a safe place as soon as possible.

Do not continue when you cannot see clearly. Slow down smoothly and stop somewhere protected from traffic.

Windscreen wipers failing during heavy rain
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you not use water on a fire involving live electrical equipment?

288. Why should you not use water on a fire involving live electrical equipment?

Water prevents the power supply from switching off.
Water makes electrical cables harder to disconnect.
Water can cause the battery to charge more quickly.
✓ Water can conduct electricity and create an electric-shock hazard.

Do not use water on a fire involving energised electrical equipment, because water can conduct electricity and create a serious electric-shock hazard. Keep clear, disconnect the power only if it is safe to do so, and call the emergency services. Use only a suitable fire extinguisher if it is safe and you know how to use it.

Fire involving live electrical equipment
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you be especially alert for wild animals at dawn and dusk?

289. Why should you be especially alert for wild animals at dawn and dusk?

✓ Many animals are more active at these times.
Animals cannot see vehicles during daylight.
Speed limits change automatically at dawn and dusk.
Road signs are harder for animals to recognise.

Many wild animals are most active around dawn and dusk, when visibility may also be reduced.

Wild animal beside a road in low light
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Which vehicle type is mainly associated with driving licence AM?

290. Which vehicle type is mainly associated with driving licence AM?

Car.
✓ Moped.
Motorcycle.
Truck.

Driving licence AM is mainly associated with mopeds. Category AM covers mopeds with a design speed above 25 km/h and up to 45 km/h.

Driving licence card for category AM
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Which side do people drive on in Spain?

291. Which side do people drive on in Spain?

Left-hand side.
✓ Right-hand side.

Traffic drives on the right-hand side of the road in Spain.

Road traffic and the designated driving side
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you not ignore temporary speed limits?

292. Why should you not ignore temporary speed limits?

They are recommendations rather than limits.
They apply only when traffic is congested.
✓ They are used to protect people and manage hazards.
They apply only to road workers.

Temporary speed limits may be used near roadworks, accidents, events, or dangerous conditions. They help keep traffic safe.

Temporary speed-limit sign at roadworks
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should cyclists do before turning or changing position on the road?

293. What should cyclists do before turning or changing position on the road?

Signal only when a vehicle is close behind.
Look behind only after starting the turn.
Move first, then signal to traffic behind.
✓ Look behind, signal clearly, and move only when safe.

Checking behind and signalling gives other road users time to understand what you intend to do.

Cyclist preparing to turn or change road position
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
You do not need to look for cyclists when opening your car door.

294. You do not need to look for cyclists when opening your car door.

True.
✓ False.

You should always check for cyclists, motorcyclists, and other road users before opening a door.

Cyclist near the door of a parked car
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you reduce speed when approaching roadworks?

295. Why should you reduce speed when approaching roadworks?

You should not reduce speed near roadworks.
To reduce wear on the vehicle suspension.
To keep construction dust off the windscreen.
✓ Road workers, narrow lanes, and unexpected hazards may be present.

Roadworks can involve workers, machinery, changing lane layouts, and uneven surfaces. Lower speed gives you more time to react.

Vehicle approaching a roadworks area
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
You should stay focused on the road and avoid unnecessary distractions.

296. You should stay focused on the road and avoid unnecessary distractions.

False.
✓ True.

Distractions reduce awareness and reaction time, making driving more dangerous.

Driver keeping attention on the road ahead
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this vehicle-control symbol indicate?

297. What does this vehicle-control symbol indicate?

✓ Seat heating.
Seat ventilation.
Heated steering wheel.
Rear window demister.

This control activates the seat heating, which warms the seat cushion and, on many vehicles, the backrest. Several heat levels may be available.

Heated-seat control and symbol
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do around a damaged electric or hybrid vehicle?

298. What should you do around a damaged electric or hybrid vehicle?

✓ Keep clear of damaged high-voltage components and call trained assistance.
Disconnect exposed electrical components yourself.
Inspect damaged cables closely before calling for help.
Move damaged high-voltage parts away from the road.

Electric and hybrid vehicles can contain dangerous high-voltage systems. Do not touch damaged cables, batteries, or electrical components.

Damaged electric vehicle and high-voltage safety risks
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you avoid wearing dark clothing at night?

299. Why should you avoid wearing dark clothing at night?

Headlights make clothing colour unimportant.
Street lighting makes dark clothing easy to see.
✓ Drivers may have difficulty seeing you.
Clothing colour matters only on unlit roads.

Dark clothing makes pedestrians harder to see in low-light conditions. Bright or reflective clothing improves visibility.

Pedestrian wearing dark clothing at night
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you check shortly after securing a load?

300. What should you check shortly after securing a load?

Increase speed briefly to test the restraints.
Check the load only when you reach your destination.
✓ Stop safely and check that the restraints are still tight.
Assume the load is secure once the journey has started.

Loads and straps may settle or loosen after the journey begins. Recheck them at a safe stopping place.

Rechecking straps securing a vehicle's load
AI-generated by Traffic-rules.com • WCIT • CC BY-SA