QuizTraffic rulesFinland

Test your knowledge with our multiple-choice quiz. Learn from each answer and improve your understanding of the traffic rules and road signs of Finland.

For informational purposes only. Always follow official regulations. Some content and images were created with AI assistance.


What is the clutch biting point?

601. What is the clutch biting point?

The point where the engine switches off.
The point where the parking brake releases.
The point where the clutch pedal is fully pressed.
✓ The point where the clutch begins to transmit power to the wheels.

The clutch biting point is reached as the clutch pedal is released and the clutch begins to transmit power from the engine to the transmission. Controlling this point helps the driver move off smoothly.

Clutch-pedal control when moving off
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What is the purpose of a pedestrian crossing?

602. What is the purpose of a pedestrian crossing?

To give pedestrians priority throughout the whole street.
To separate pedestrians from cyclists along the road.
✓ To help pedestrians cross the road safely.
To allow pedestrians to cross without checking traffic.

Pedestrian crossings provide a designated place where people can safely cross the road.

Pedestrian crossing across a road
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if you are dazzled by low sun?

603. What should you do if you are dazzled by low sun?

Increase speed to get through the glare more quickly.
Look only at the road immediately in front of you.
✓ Slow down and use the sun visor if needed.
Follow the vehicle ahead closely as a guide.

Low sun can greatly reduce visibility. Slow down, increase your safety margin, and use the sun visor or sunglasses if needed.

Low sunlight dazzling a driver
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Which speed unit is used in Finland?

604. Which speed unit is used in Finland?

Miles per hour (mph).
✓ Kilometres per hour (km/h).

Road speeds in Finland are shown in kilometres per hour (km/h).

Road speed expressed in kilometres per hour
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do before refuelling a petrol or diesel vehicle?

605. What should you do before refuelling a petrol or diesel vehicle?

Keep the engine idling if the vehicle is outside.
✓ Switch off the engine before starting to refuel.
Leave the engine running to protect the battery.
Switch on the hazard lights while refuelling.

Switch off the engine before refuelling. Fuel vapours are flammable, so avoid ignition sources and follow the safety instructions at the filling station. If fuel is spilled, do not start the vehicle until the situation has been made safe.

Vehicle at a pump before refuelling
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why can mixing alcohol with medicine be dangerous for drivers?

606. Why can mixing alcohol with medicine be dangerous for drivers?

Medicine prevents alcohol from causing drowsiness.
The combination is safe if taken with food.
✓ The combination may increase drowsiness or impairment.
Medicine can cancel out the effects of alcohol.

Some prescription and non-prescription medicines can intensify alcohol-related drowsiness, dizziness, poor coordination, or reduced concentration.

Alcohol and medicine as a driving-impairment risk
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why is it dangerous to cross between parked cars?

607. Why is it dangerous to cross between parked cars?

You cannot hear approaching traffic between cars.
Parked cars make the crossing distance longer.
✓ Drivers may not see you or expect you to cross.
Traffic always moves faster beside parked cars.

Parked vehicles can block the view between pedestrians and drivers. This makes it harder to see approaching traffic and harder for drivers to see you.

Pedestrian crossing between parked cars
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this dashboard symbol indicate?

608. What does this dashboard symbol indicate?

Dipped headlights.
Front fog lights.
✓ Rear fog lights.
Sidelights.

This symbol indicates that the rear fog lights are switched on. Rear fog lights make the vehicle more visible from behind in conditions of severely reduced visibility, but they can dazzle other road users when used unnecessarily.

Rear fog-light symbol on the dashboard
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this dashboard symbol indicate?

609. What does this dashboard symbol indicate?

✓ Exterior-light failure.
Rear fog lights.
Dipped headlights.
Engine-management warning.

This symbol indicates a possible failure of an exterior vehicle light, such as a headlight, tail light, brake light or indicator. Check the vehicle's exterior lights and replace or repair any faulty light.

Exterior-light failure warning symbol on the dashboard
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if your motorcycle helmet visor starts to fog?

610. What should you do if your motorcycle helmet visor starts to fog?

Close all helmet vents completely.
Keep riding at the same speed until it clears.
✓ Reduce speed and clear the visor safely.
Look around the side of the visor instead.

A fogged visor can seriously reduce your view of the road. Reduce speed and use the helmet's ventilation, demisting or anti-fog features where available. If you cannot restore a clear view safely, stop in a safe place before continuing.

Misted visor on a motorcycle helmet
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if traffic beyond a railway crossing is blocked?

611. What should you do if traffic beyond a railway crossing is blocked?

Follow the vehicle ahead closely across the tracks.
Enter the crossing and wait for traffic to move.
✓ Wait until there is enough space to clear the tracks completely.
Cross quickly before the warning signals activate.

Never enter a railway crossing unless you can clear the tracks completely. If traffic ahead is blocked, wait before the crossing so you cannot become trapped on the railway.

Congested traffic beyond a railway crossing
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do about a flat tyre on a high-speed road?

612. What should you do about a flat tyre on a high-speed road?

Drive slowly on the damaged tyre to the next exit.
✓ Move to a protected location if possible and call for professional recovery.
Stop immediately and change the tyre where you are.
Repair the tyre beside the traffic lane using hazard lights.

Changing a wheel close to high-speed traffic is extremely dangerous. Move away from traffic and use professional assistance.

Vehicle stopped with a flat tyre on a high-speed road
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do first after a collision?

613. What should you do first after a collision?

✓ Stop, check for danger and injuries, and call for help if needed.
Call your insurance company before checking for danger.
Continue driving if the vehicles can still move.
Check the vehicle damage before checking for injuries.

Stop the vehicle, warn other traffic where appropriate, assess immediate danger and injuries, and contact the emergency services when needed. Exchange any details required by local law.

Vehicles stopped after a road collision
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
How should you approach a sharp bend on a mountain road?

614. How should you approach a sharp bend on a mountain road?

✓ Reduce speed before the bend and remain in your lane.
Move toward the centre of the road for a better view.
Accelerate through the bend to maintain momentum.
Brake hard while turning through the bend.

Mountain bends may hide oncoming vehicles, cyclists, animals, or debris. Slow down before entering and keep a safe road position.

Sharp bend on a mountain road
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What is the purpose of heated door mirrors?

615. What is the purpose of heated door mirrors?

To fold the mirrors automatically.
To adjust the mirror angle.
To improve the headlights.
✓ To clear mist or ice from the mirror glass.

Heated door mirrors warm the mirror glass to help clear mist, condensation, or light ice and improve rearward visibility. On some vehicles, they operate together with the rear-window demister.

Heated door-mirror control and demisting function
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What may happen when you press the accelerator fully in an automatic vehicle?

616. What may happen when you press the accelerator fully in an automatic vehicle?

The transmission selects Park.
✓ The transmission may shift to a lower gear for stronger acceleration.
The parking brake applies automatically.
The engine switches off.

In many automatic vehicles, pressing the accelerator fully can activate kickdown, causing the transmission to select a lower gear and provide stronger acceleration.

Accelerator-pedal operation for automatic kickdown
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you expect if the engine suddenly stalls while the vehicle is moving?

617. What should you expect if the engine suddenly stalls while the vehicle is moving?

Power assistance will continue working normally.
✓ Steering and braking may require more effort, so move to a safe place.
The steering and brakes will stop working completely.
The steering will become lighter as the vehicle slows.

Power assistance may be reduced when the engine stops. Keep control, use the hazard lights if needed, and steer toward a safe stopping area.

Driver responding to an engine stall while moving
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if your main beam could dazzle another driver?

618. What should you do if your main beam could dazzle another driver?

Move farther from the centre and keep the main beam on.
Keep the main beam on unless the other driver flashes you.
Flash the main beam briefly before passing.
✓ Switch to dipped headlights.

Main beam can dazzle other road users and reduce their visibility. Switch to dipped headlights whenever your main beam could dazzle another driver.

Headlight glare affecting another road user
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What is the legal blood alcohol limit for ordinary drivers in Finland?

619. What is the legal blood alcohol limit for ordinary drivers in Finland?

0.2 g/L.
0.0 g/L.
0.8 g/L.
✓ 0.5 g/L.

The legal blood alcohol limit for ordinary drivers in Finland is 0.5 g/L.

Alcohol limits for ordinary drivers
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does the ACC position of a traditional ignition switch normally allow?

620. What does the ACC position of a traditional ignition switch normally allow?

✓ Electrical accessories to be used without starting the engine.
The transmission to select Drive.
The starter motor to turn the engine.
The parking brake to release.

The ACC (accessory) position normally supplies power to certain electrical accessories, such as the audio system, without starting the engine. The exact functions available can vary between vehicles.

ACC accessory position on an ignition switch
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Which passenger vehicles are covered by driving licence D?

621. Which passenger vehicles are covered by driving licence D?

✓ Buses designed for more than eight passengers.
Minibuses for no more than eight passengers.
Buses only when towing a trailer.
Goods vehicles over 7,500 kg.

Category D covers motor vehicles designed and constructed to carry more than eight passengers in addition to the driver. A trailer up to 750 kg may be towed.

Bus covered by category D
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if a child runs onto the road ahead?

622. What should you do if a child runs onto the road ahead?

Swerve immediately into the opposite lane.
Flash your lights instead of slowing down.
Accelerate to pass before the child moves further into the road.
✓ Brake firmly and be prepared to stop.

Children can act unpredictably. Brake firmly, stay alert, and be prepared for more children to follow.

Child entering the road ahead of a vehicle
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you take regular breaks during a long journey?

623. Why should you take regular breaks during a long journey?

To allow the engine to cool down.
✓ To help prevent fatigue and maintain concentration.
To improve fuel quality.
To make the journey feel shorter.

Regular breaks during a long journey help reduce fatigue and maintain concentration. Do not wait until you are struggling to stay awake before stopping to rest.

Driver resting during a long journey
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if fuel spills while you are refuelling?

624. What should you do if fuel spills while you are refuelling?

Ignore the spill if only a small amount escaped.
Continue filling the tank and clean it up afterwards.
Wash the spill away with water and continue refuelling.
✓ Stop refuelling, avoid ignition sources, and alert station staff.

If fuel is spilled, stop refuelling immediately and keep flames, sparks, and other ignition sources away. Do not start the vehicle until the situation is safe. Alert filling-station staff and follow their instructions for dealing with the spill.

Fuel spilled during refuelling
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you leave space beside large vehicles when they turn?

625. Why should you leave space beside large vehicles when they turn?

They must stop before making every turn.
They always have priority while turning.
They can turn only from the centre of the road.
✓ They may need extra room to complete the turn.

Large vehicles often swing wide when turning and have larger blind spots. Keep clear and do not move into the space beside them.

Large vehicle needing extra space to turn
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Where should you go after safely leaving a disabled vehicle in a tunnel?

626. Where should you go after safely leaving a disabled vehicle in a tunnel?

✓ To a protected emergency area or exit away from traffic.
Walk along the traffic lane toward the tunnel entrance.
Stay close to the vehicle until traffic starts moving.
Remain beside the vehicle and wait for assistance.

Move away from live traffic and use a marked emergency exit, refuge area, or protected walkway where available.

Leaving a disabled vehicle for a tunnel emergency area
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Should the legal alcohol limit be treated as a safe target?

627. Should the legal alcohol limit be treated as a safe target?

Yes, if you know exactly how much you have drunk.
Yes, when driving only a short distance.
✓ No, impairment can begin before the legal limit is reached.
Yes, because impairment begins only above the limit.

A legal limit is an enforcement threshold, not a recommended drinking level. Even a small amount of alcohol can affect driving performance.

Alcohol consumption and the limits of safe driving
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this vehicle-control symbol indicate?

628. What does this vehicle-control symbol indicate?

✓ Seat adjustment.
Steering-wheel adjustment.
Lumbar support.
Seat heating.

This control adjusts the position of the seat. Depending on the vehicle, it may move the seat forwards or backwards, raise or lower it, or change the backrest angle.

Control for adjusting the driver's seat
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why must a roof load be securely attached?

629. Why must a roof load be securely attached?

✓ It could shift or fall and create a serious hazard.
To stop the roof rack from increasing fuel consumption.
Because the roof will hold the load in place while driving.
Because light roof loads cannot be affected by the wind.

A roof load is exposed to strong airflow and movement. It must be restrained correctly and kept within the permitted limits.

Load secured to a vehicle's roof
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if you miss your motorway exit?

630. What should you do if you miss your motorway exit?

Cross the painted separation area back to the exit.
Use an emergency opening in the central reservation.
✓ Continue to the next exit.
Move onto the shoulder and reverse carefully.

Never reverse or make a sudden manoeuvre. Continue safely and change your route at the next suitable exit.

Vehicle continuing past a motorway exit
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
How should you leave a broken-down vehicle when traffic is passing nearby?

631. How should you leave a broken-down vehicle when traffic is passing nearby?

Leave through the door nearest moving traffic.
Stand beside the vehicle before moving away.
✓ Use the door furthest from moving traffic when it is safe to do so.
Walk around the vehicle on the traffic side.

Leaving through the side away from traffic reduces the risk of being struck by a passing vehicle.

Leaving a broken-down vehicle away from passing traffic
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you check before starting a manual vehicle?

632. What should you check before starting a manual vehicle?

That the parking brake is released.
✓ That the gearbox is in neutral and the clutch is pressed.
That first gear is selected and the accelerator is pressed.
That reverse gear is selected.

Before starting a manual vehicle, make sure the gearbox is in neutral and press the clutch pedal. This helps prevent the vehicle from moving unexpectedly when the engine starts.

Clutch and gear checks before starting a manual vehicle
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should a motorcyclist avoid riding in another vehicle's blind spot?

633. Why should a motorcyclist avoid riding in another vehicle's blind spot?

The motorcycle's brakes may become less effective.
✓ The driver may not be able to see the motorcycle.
The motorcycle's indicators may be harder to see.
The motorcycle will use more fuel.

Motorcycles can be difficult to see, particularly when they remain in another vehicle's blind spot. Avoid staying alongside a vehicle where the driver may not see you, and choose a position where you are more likely to be visible.

Motorcycle in another vehicle's blind spot
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why must you avoid smoking or open flames at a filling station?

634. Why must you avoid smoking or open flames at a filling station?

Heat can make the fuel nozzle stop automatically.
✓ Fuel vapours can ignite and cause a fire.
Smoke can interfere with the fuel gauge.
Open flames can reduce the fuel's quality.

Petrol and other fuels can produce flammable vapours. Smoking, open flames, sparks, or other ignition sources can ignite these vapours and cause a serious fire. Follow all filling-station safety rules while refuelling.

No-smoking warning at a filling station
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if the windscreen becomes damaged while driving?

635. What should you do if the windscreen becomes damaged while driving?

Rely on the mirrors instead of the windscreen.
Remove loose glass while the vehicle is moving.
Drive faster to reach a safe place sooner.
✓ Reduce speed and stop safely if your view is affected.

Severe damage can obstruct your view and weaken the glass. Do not continue if you cannot see the road clearly.

Damaged windscreen affecting the driver's view
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do before changing lanes?

636. What should you do before changing lanes?

Check only the lane directly beside you.
Rely on your mirrors without checking the blind spot.
✓ Check your mirrors and blind spot.
Check the blind spot only after starting to move.

Always check your mirrors, look over your shoulder if necessary, and make sure it is safe before changing lanes.

Driver checking surrounding traffic before changing lanes
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
You do not need to look for cyclists when opening your car door.

637. You do not need to look for cyclists when opening your car door.

True.
✓ False.

You should always check for cyclists, motorcyclists, and other road users before opening a door.

Cyclist near the door of a parked car
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does the SET function of cruise control normally do?

638. What does the SET function of cruise control normally do?

Returns to a previously stored speed.
✓ Stores the current speed as the cruising speed.
Applies the brakes automatically.
Switches cruise control off.

The SET function normally stores the vehicle's current speed as the cruise-control speed. Use it only when the road, traffic, and driving conditions are suitable.

SET button for storing a cruising speed
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you avoid keeping the clutch pedal pressed while driving?

639. Why should you avoid keeping the clutch pedal pressed while driving?

✓ It reduces engine braking and vehicle control.
It locks the steering.
It increases tyre pressure.
It applies the parking brake.

Keeping the clutch pedal pressed while the vehicle is moving disconnects the engine from the transmission. This reduces engine braking and can reduce your control of the vehicle.

Clutch held down while a vehicle is moving
AI-generated by Traffic-rules.com • WCIT • CC BY-SA