QuizTraffic rulesGreece

Test your knowledge with our multiple-choice quiz. Learn from each answer and improve your understanding of the traffic rules and road signs of Greece.

For informational purposes only. Always follow official regulations. Some content and images were created with AI assistance.


What should you do if the brake pedal feels unusually soft?

351. What should you do if the brake pedal feels unusually soft?

Press the accelerator harder before braking.
Use only the parking brake while driving.
✓ Stop safely and have the braking system inspected.
Reduce the tyre pressure to improve braking.

A soft brake pedal or increased stopping distance may indicate a serious brake fault. Do not continue driving normally until the system has been checked.

Brake-pedal check for a possible braking fault
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Who generally has priority at an uncontrolled intersection in Greece?

352. Who generally has priority at an uncontrolled intersection in Greece?

✓ Traffic approaching from the right.
The largest vehicle.
Traffic approaching from the left.
The vehicle travelling fastest.

At an uncontrolled intersection in Greece, you generally give way to traffic approaching from the right.

Vehicles approaching an uncontrolled junction from different directions
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do before opening your car door near traffic?

353. What should you do before opening your car door near traffic?

Open the door slowly and expect traffic to avoid you.
Signal before opening the door without checking behind.
Check only for vehicles, not cyclists or pedestrians.
✓ Check for cyclists, pedestrians, and vehicles.

Before opening a car door, check carefully for cyclists, pedestrians, and vehicles to avoid causing a collision.

Checking for passing road users before opening a car door
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should a motorcycle helmet be worn correctly and securely fastened?

354. Why should a motorcycle helmet be worn correctly and securely fastened?

To prevent the motorcycle from skidding.
✓ To reduce the risk of serious head injury in a collision.
To make the motorcycle easier to balance.
To reduce fuel consumption at higher speeds.

A correctly fitted and securely fastened motorcycle helmet helps protect the rider's head and can reduce the risk and severity of head injury in a collision or fall.

Motorcyclist wearing a securely fastened helmet
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why is counting drinks an unreliable way to decide whether you can drive?

355. Why is counting drinks an unreliable way to decide whether you can drive?

One drink affects every person in the same way.
Food makes each drink count as less alcohol.
✓ Drink strength, serving size, and individual effects can vary.
The number of drinks matters more than their strength.

Alcohol concentration and serving sizes vary, and factors such as body size, food, medication, and time can affect impairment.

Alcoholic drinks with different strengths and serving sizes
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Which motorcycles are covered by driving licence A2?

356. Which motorcycles are covered by driving licence A2?

Motorcycles up to 125 cm³ only.
✓ Motorcycles up to 35 kW within the A2 limits.
Mopeds up to 45 km/h only.
Motorcycles of any power.

Category A2 covers motorcycles with power not exceeding 35 kW and a power-to-weight ratio not exceeding 0.2 kW/kg. The motorcycle must not be derived from a vehicle with more than double its power.

Motorcycle covered by category A2
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does the SET function of cruise control normally do?

357. What does the SET function of cruise control normally do?

Switches cruise control off.
Returns to a previously stored speed.
✓ Stores the current speed as the cruising speed.
Applies the brakes automatically.

The SET function normally stores the vehicle's current speed as the cruise-control speed. Use it only when the road, traffic, and driving conditions are suitable.

SET button for storing a cruising speed
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you expect if the engine suddenly stalls while the vehicle is moving?

358. What should you expect if the engine suddenly stalls while the vehicle is moving?

The steering will become lighter as the vehicle slows.
The vehicle will stop immediately when the engine stops.
Power assistance will continue working normally.
✓ Steering and braking may require more effort, so move to a safe place.

Power assistance may be reduced when the engine stops. Keep control, use the hazard lights if needed, and steer toward a safe stopping area.

Driver responding to an engine stall while moving
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you check before starting a motorcycle journey?

359. What should you check before starting a motorcycle journey?

Only the fuel level and mirrors.
Nothing if the motorcycle was recently serviced.
✓ Tyres, brakes, lights, steering, and controls.
Only the tyres if the journey is long.

Before riding, carry out a basic safety check. Check the tyres, brakes, lights, steering and controls, and inspect the drive chain, belt or other drive components where applicable. Finding a problem before setting off can prevent a breakdown or loss of control.

Checking a motorcycle before a journey
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you reduce speed in fog?

360. Why should you reduce speed in fog?

To prevent the windscreen from misting.
✓ Because you have less time to react to hazards you cannot see.
To reduce fuel consumption.
To reduce vehicle emissions.

Fog can hide obstacles, pedestrians, and other vehicles. Lower speed gives you more time to react.

Fog limiting a driver's view ahead
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you hold the steering wheel firmly during strong gusts?

361. Why should you hold the steering wheel firmly during strong gusts?

To reduce braking distance.
✓ To maintain control if the vehicle is pushed.
To keep the suspension level.
To improve tyre grip.

A firm but relaxed grip helps you respond safely to sudden changes caused by wind.

Driver holding the steering wheel during strong gusts
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What is the minimum licence for a goods vehicle over 7,500 kg maximum authorised mass?

362. What is the minimum licence for a goods vehicle over 7,500 kg maximum authorised mass?

Licence C1E.
Licence D.
Licence C1.
✓ Licence C.

Category C1 is limited to vehicles with a maximum authorised mass not exceeding 7,500 kg. A goods vehicle above this limit requires category C.

Goods vehicle above 7,500 kg maximum authorised mass
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What is the general speed limit for cars on ordinary roads outside built-up areas in Greece?

363. What is the general speed limit for cars on ordinary roads outside built-up areas in Greece?

70 km/h.
✓ 90 km/h.
Other speed limit.
100 km/h.

In Greece, the general speed limit for cars on ordinary roads outside built-up areas is 90 km/h, unless signs indicate otherwise.

Speed limits for cars outside built-up areas
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Where should you go after safely leaving a disabled vehicle in a tunnel?

364. Where should you go after safely leaving a disabled vehicle in a tunnel?

Stay close to the vehicle until traffic starts moving.
Wait directly behind the vehicle where drivers can see you.
Walk along the traffic lane toward the tunnel entrance.
✓ To a protected emergency area or exit away from traffic.

Move away from live traffic and use a marked emergency exit, refuge area, or protected walkway where available.

Leaving a disabled vehicle for a tunnel emergency area
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does the AUTO setting on the lighting control do?

365. What does the AUTO setting on the lighting control do?

✓ It switches the headlights on or off automatically when needed.
It flashes the headlights automatically.
It switches on the hazard warning lights.
It keeps the main beam switched on.

The AUTO lighting setting allows the vehicle to switch its exterior lights on or off automatically according to ambient light conditions. The driver remains responsible for ensuring that the correct lights are being used.

AUTO setting on the vehicle's lighting control
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Which motorcycles are covered by driving licence A1?

366. Which motorcycles are covered by driving licence A1?

Motorcycles up to 35 kW.
Cars up to 3,500 kg.
✓ Motorcycles up to 125 cm³ and 11 kW.
Motorcycles of any power.

Category A1 covers motorcycles with an engine capacity of no more than 125 cm³, power of no more than 11 kW, and a power-to-weight ratio of no more than 0.1 kW/kg. It also covers powered tricycles up to 15 kW.

Light motorcycle covered by category A1
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What is the minimum licence for a bus designed for more than 16 passengers?

367. What is the minimum licence for a bus designed for more than 16 passengers?

Licence B.
Licence D1E.
✓ Licence D.
Licence C.

Category D1 is limited to vehicles designed for no more than 16 passengers in addition to the driver. A bus designed for more than 16 passengers therefore requires category D.

Bus designed for more than 16 passengers
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you check shortly after securing a load?

368. What should you check shortly after securing a load?

Increase speed briefly to test the restraints.
Check the load only when you reach your destination.
Loosen the restraints slightly after the load has settled.
✓ Stop safely and check that the restraints are still tight.

Loads and straps may settle or loosen after the journey begins. Recheck them at a safe stopping place.

Rechecking straps securing a vehicle's load
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What is the best place to cross the road?

369. What is the best place to cross the road?

✓ At a designated crossing.
At the shortest point, even if visibility is limited.
At a junction without checking for turning traffic.
Between parked vehicles if traffic appears quiet.

Use a designated crossing whenever possible. It is usually the safest place to cross the road.

Designated crossing for pedestrians
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What information is needed when requesting emergency assistance?

370. What information is needed when requesting emergency assistance?

Your vehicle colour and approximate location.
Only the road name and nearest town.
✓ Your exact location, direction of travel, vehicle details, and the problem.
Your name, destination, and planned route.

Road numbers, junctions, location markers, direction of travel, and a clear description of the incident help assistance reach you quickly.

Requesting help after a vehicle breakdown
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
How should a motorcyclist brake in an emergency?

371. How should a motorcyclist brake in an emergency?

Grab the front brake as suddenly as possible.
✓ Apply both brakes firmly and progressively.
Steer sharply while braking hard.
Use only the rear brake.

During emergency braking, use both brakes firmly and progressively while keeping the motorcycle as upright and stable as practical. Avoid sudden steering. If ABS is fitted, maintain firm braking pressure and allow the system to work.

Motorcyclist making an emergency stop
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why can main-beam headlights make driving in fog more difficult?

372. Why can main-beam headlights make driving in fog more difficult?

Main beam reduces the effectiveness of the fog lights.
The stronger beam uses too much electrical power.
Main beam makes interior lights less effective.
✓ The light can reflect off fog droplets and reduce visibility.

Main beam can reflect back from fog and create glare, making it harder to see the road ahead.

Headlight glare reflected by fog
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you never reverse or make a U-turn inside a tunnel unless directed?

373. Why should you never reverse or make a U-turn inside a tunnel unless directed?

✓ It can cause a serious collision with approaching traffic.
The tunnel may be too narrow for the vehicle to turn.
A U-turn can confuse the tunnel's traffic monitoring system.
Tunnel ventilation works only in the normal direction of travel.

Other drivers may not expect a vehicle to reverse or turn around. Only change direction when instructed by police or tunnel staff.

Vehicle manoeuvring inside a road tunnel
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should the driver's floor mat be properly secured?

374. Why should the driver's floor mat be properly secured?

It could cause the tyres to lose pressure.
It could make the steering wheel harder to turn.
✓ It could slide forwards and interfere with the pedals.
It could reduce the effectiveness of the airbags.

A loose or incorrectly fitted floor mat can move into the pedal area and interfere with the accelerator, brake, or clutch. Make sure the driver's floor mat is correctly fitted, secured, and does not obstruct any pedal.

Driver's floor mat near the pedals
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
How should a three-point seat belt normally be worn during pregnancy?

375. How should a three-point seat belt normally be worn during pregnancy?

Loosely fitted so it does not press against the body.
With the lap belt positioned across the abdomen.
✓ With the lap belt low across the hips and the shoulder belt across the chest.
Using only the lap section of the seat belt.

During pregnancy, a three-point seat belt should be worn correctly. The lap belt should sit low across the hips, below the abdomen, while the shoulder belt should pass across the chest and to the side of the abdomen. The belt should fit snugly and should not be placed behind the back or under the arm.

Seat-belt positioning during pregnancy
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What may happen if you release the clutch too quickly when moving off?

376. What may happen if you release the clutch too quickly when moving off?

✓ The engine may stall.
The headlights may switch off.
The parking brake may engage.
The steering may lock.

Releasing the clutch pedal too quickly when moving off can cause the engine to stall. Release the clutch smoothly through the biting point while applying the accelerator progressively.

Clutch release and engine stalling when moving off
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you reduce speed when approaching roadworks?

377. Why should you reduce speed when approaching roadworks?

To reduce wear on the vehicle suspension.
✓ Road workers, narrow lanes, and unexpected hazards may be present.
To reduce exhaust gases near construction sites.
To keep construction dust off the windscreen.

Roadworks can involve workers, machinery, changing lane layouts, and uneven surfaces. Lower speed gives you more time to react.

Vehicle approaching a roadworks area
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this dashboard symbol indicate?

378. What does this dashboard symbol indicate?

Parking brake applied.
✓ Brake-pad wear warning.
Low tyre pressure.
ABS fault.

This symbol indicates that the brake pads may be worn and should be inspected. Continuing to drive with excessively worn brake pads can reduce braking performance and damage other brake components.

Brake-pad wear warning symbol on the dashboard
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this dashboard symbol indicate?

379. What does this dashboard symbol indicate?

Engine-temperature warning.
✓ Low engine oil level.
Low oil pressure.
Charging-system warning.

This symbol indicates that the engine oil level is low. Check the oil level according to the manufacturer's instructions and add the correct oil if necessary.

Low oil-level warning symbol on the dashboard
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you press the clutch pedal fully when changing gear?

380. Why should you press the clutch pedal fully when changing gear?

To increase engine speed.
✓ To disengage the engine fully from the transmission.
To apply the brakes.
To lock the gear lever in position.

Pressing the clutch pedal fully disengages the engine from the transmission, allowing the gear to be changed smoothly and reducing unnecessary wear on the gearbox and clutch.

Clutch pedal pressed fully for a gear change
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
How should you normally apply the brake pedal for a smooth stop?

381. How should you normally apply the brake pedal for a smooth stop?

Use the parking brake instead.
✓ Apply pressure progressively.
Press it as hard as possible immediately.
Pump the pedal repeatedly.

For normal braking, apply the brake pedal progressively and smoothly. As the vehicle comes to a stop, easing the pressure slightly can help avoid a sudden jerk.

Progressive brake-pedal pressure for a smooth stop
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you look well ahead while driving?

382. Why should you look well ahead while driving?

✓ To identify developing hazards early and gain more time to react.
To follow the vehicle ahead more closely.
To avoid checking your mirrors as often.
To maintain the same speed in every situation.

Looking well ahead helps you identify developing hazards early, such as slowing traffic, pedestrians, junctions, or changing road conditions. Earlier detection gives you more time to assess the situation and respond smoothly and safely.

Driver observing the road and traffic ahead
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Which control is normally used to switch on the dipped headlights?

383. Which control is normally used to switch on the dipped headlights?

The windscreen-wiper control.
The hazard warning switch.
The rear-window demister.
✓ The lighting control.

The lighting control is normally used to switch on the dipped headlights. Depending on the vehicle, it may be a rotary switch or part of a lighting stalk.

Lighting control for switching on dipped headlights
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if a child runs onto the road ahead?

384. What should you do if a child runs onto the road ahead?

Accelerate to pass before the child moves further into the road.
✓ Brake firmly and be prepared to stop.
Flash your lights instead of slowing down.
Sound your horn and continue driving.

Children can act unpredictably. Brake firmly, stay alert, and be prepared for more children to follow.

Child entering the road ahead of a vehicle
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if you are approaching an animal-drawn vehicle?

385. What should you do if you are approaching an animal-drawn vehicle?

Flash your headlights to encourage it to move aside.
Drive close behind until there is room to pass.
Overtake quickly before the animal changes direction.
✓ Slow down and pass carefully with plenty of space.

Animals can be startled by noise or sudden movement. Reduce speed, keep distance, and pass only when it is safe.

Vehicle approaching an animal-drawn vehicle
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if animals are gathered beside a narrow rural road?

386. What should you do if animals are gathered beside a narrow rural road?

Sound your horn so the animals move away.
Drive close to prevent them entering your lane.
✓ Reduce speed and pass only when there is enough space.
Maintain speed because the animals are beside the road.

Animals beside a narrow road may step into your path. Slow down and leave as much safe space as possible.

Animals gathered beside a narrow rural road
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you use a lower gear when driving downhill?

387. Why should you use a lower gear when driving downhill?

It allows the vehicle to coast more freely.
✓ It helps control speed using engine braking.
It makes the steering lighter on descents.
It reduces engine braking to save fuel.

Engine braking helps prevent the vehicle from gaining too much speed and reduces strain on the brakes.

Lower-gear selection for a downhill road
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you notice the location of emergency exits in a tunnel?

388. Why should you notice the location of emergency exits in a tunnel?

They show where overtaking is prohibited.
They provide shortcuts to nearby roads.
✓ You may need to reach one quickly during an emergency.
They mark areas where vehicles may stop temporarily.

Knowing where emergency exits and refuge areas are located can save valuable time during a fire, collision, or evacuation.

Emergency exit inside a road tunnel
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why is it important to make yourself visible at night?

389. Why is it important to make yourself visible at night?

To make drivers give way wherever you cross.
To avoid checking for approaching vehicles.
✓ To make drivers see you more easily.
To ensure drivers can always stop in time.

Bright or reflective clothing helps drivers notice pedestrians in low-light conditions.

Pedestrian visibility beside a road at night
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this dashboard symbol indicate?

390. What does this dashboard symbol indicate?

Low engine oil.
Low washer fluid.
✓ Low engine coolant level.
Engine overheating.

This symbol indicates that the engine coolant level is low. Check the coolant level when the engine is cool and refill it with the correct coolant if necessary.

Low coolant-level warning symbol on the dashboard
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
How should the interior rear-view mirror be adjusted?

391. How should the interior rear-view mirror be adjusted?

To show the driver's face.
To show mainly the rear seats.
To point towards the left door mirror.
✓ To give a clear view through the rear window.

Adjust the interior rear-view mirror before driving so that you have a clear view through the rear window without needing to move your head significantly.

Adjusting the interior rear-view mirror
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you normally do with the gearbox during a longer stop in a manual vehicle?

392. What should you normally do with the gearbox during a longer stop in a manual vehicle?

Keep first gear selected with the clutch pressed.
Select reverse gear.
✓ Select neutral and release the clutch.
Keep the accelerator pressed.

During a longer stop, selecting neutral and releasing the clutch can reduce unnecessary strain on the clutch release mechanism. Keep the vehicle securely held with the brake or parking brake as appropriate.

Neutral gear selection during a longer stop
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do with the clutch during emergency braking in a manual vehicle?

393. What should you do with the clutch during emergency braking in a manual vehicle?

✓ Press it fully while maintaining firm brake pressure.
Release it suddenly.
Pump it repeatedly.
Keep it partly pressed.

During emergency braking in a manual vehicle, maintain firm pressure on the brake and press the clutch pedal fully so the engine does not stall as the vehicle slows. Do not reduce braking pressure while operating the clutch.

Brake and clutch operation during an emergency stop
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do when meeting another vehicle on a narrow mountain road?

394. What should you do when meeting another vehicle on a narrow mountain road?

✓ Slow down and use a safe passing place if necessary.
Stop where the road is narrowest and wait.
Maintain speed and pass as closely as possible.
Move toward the centre so the other driver gives way.

Narrow mountain roads may not provide enough space for two vehicles. Reduce speed and cooperate to pass safely.

Vehicles meeting on a narrow mountain road
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
How should a cyclist react to a pothole?

395. How should a cyclist react to a pothole?

✓ Check surroundings, reduce speed, and avoid it smoothly.
Brake hard just before reaching the pothole.
Focus only on the pothole and not the traffic around you.
Swerve around it as soon as you notice it.

Sudden swerving can place you in the path of traffic. Check your surroundings and change direction gradually.

Cyclist approaching a pothole
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Are moped riders generally required to wear a helmet in Greece?

396. Are moped riders generally required to wear a helmet in Greece?

✓ Yes.
No.

Moped riders in Greece are generally required to wear an approved helmet.

Moped rider wearing a helmet
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you avoid resting your foot on the clutch pedal while driving?

397. Why should you avoid resting your foot on the clutch pedal while driving?

It can increase tyre pressure.
✓ It can cause unnecessary clutch wear.
It can apply the parking brake.
It can lock the steering.

Resting your foot on the clutch pedal can apply slight pressure to the clutch mechanism and cause unnecessary wear. Keep your left foot off the clutch when it is not needed.

Foot position near the clutch pedal
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should cyclists avoid riding in a large vehicle's blind spot?

398. Why should cyclists avoid riding in a large vehicle's blind spot?

✓ The driver may not be able to see them.
Large vehicles always have priority when turning.
The driver can always hear a cyclist beside the vehicle.
Cyclists must always stay behind large vehicles.

Buses and trucks have large areas where the driver cannot see cyclists, especially beside the vehicle and near turns.

Cyclist in a large vehicle's blind spot
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if your vehicle begins rolling backward on a steep incline?

399. What should you do if your vehicle begins rolling backward on a steep incline?

Switch off the engine and restart immediately.
✓ Apply the brake, secure the vehicle, and restart carefully.
Accelerate while continuing to roll backward.
Open the door and step out.

Stop the vehicle under control, apply the parking brake if necessary, and prepare to move away again safely.

Vehicle rolling backwards on a steep incline
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
When should you consider delaying a journey because of severe weather?

400. When should you consider delaying a journey because of severe weather?

Only when your vehicle has no winter tyres.
✓ When conditions make driving unsafe.
Never, if the vehicle is in good condition.
Only when roads are closed.

Severe weather can create dangerous conditions. Delaying a journey may be the safest choice when risks are too high.

Severe weather making a road journey hazardous
AI-generated by Traffic-rules.com • WCIT • CC BY-SA