QuizTraffic rulesNetherlands

Test your knowledge with our multiple-choice quiz. Learn from each answer and improve your understanding of the traffic rules and road signs of Netherlands.

For informational purposes only. Always follow official regulations. Some content and images were created with AI assistance.


Why should you check your mirrors before braking?

551. Why should you check your mirrors before braking?

To check whether the road surface is slippery.
To shorten the distance needed to stop.
✓ To know what is happening behind you.
To check whether your brake lights are working.

Checking your mirrors helps you understand what is happening behind you and anticipate how following traffic may react. In an emergency, do not delay necessary braking.

Driver checking following traffic before braking
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you adjust your speed in bad weather?

552. Why should you adjust your speed in bad weather?

To keep the engine from overheating.
To make the windscreen wipers work better.
To prevent the tyres from losing air pressure.
✓ Because visibility and grip may be reduced.

Rain, snow, fog, and ice can reduce visibility and tyre grip. Lower speed gives you more time and distance to react and stop safely.

Vehicle travelling in poor weather
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this dashboard symbol indicate?

553. What does this dashboard symbol indicate?

✓ Exterior-light failure.
Charging-system warning.
Dipped headlights.
Rear fog lights.

This symbol indicates a possible failure of an exterior vehicle light, such as a headlight, tail light, brake light or indicator. Check the vehicle's exterior lights and replace or repair any faulty light.

Exterior-light failure warning symbol on the dashboard
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does pulling the lighting stalk towards you normally do?

554. What does pulling the lighting stalk towards you normally do?

✓ Flash the main-beam headlights.
Switch on the front fog lights.
Switch on the dipped headlights.
Activate the hazard warning lights.

Pulling the lighting stalk towards you normally flashes the main-beam headlights. This briefly illuminates the main beam while the stalk is held or operated.

Lighting stalk used to flash the main-beam headlights
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What licence is needed for a B vehicle towing a trailer up to 3,500 kg above 4,250 kg combined MAM?

555. What licence is needed for a B vehicle towing a trailer up to 3,500 kg above 4,250 kg combined MAM?

Licence C1E.
Licence B.
Licence C1.
✓ Licence BE.

Category BE covers a category B towing vehicle with a trailer or semi-trailer having a maximum authorised mass of up to 3,500 kg. Category B with Code 96 is limited to combinations with a maximum authorised mass of up to 4,250 kg.

Car and trailer combination for category BE
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if fog becomes so thick that you cannot see safely?

556. What should you do if fog becomes so thick that you cannot see safely?

✓ Slow down and stop in a safe location away from traffic if necessary.
Use main beam and keep driving.
Stop immediately in the traffic lane.
Continue slowly by following the road markings.

If visibility becomes dangerously poor, find a safe place to stop rather than continuing without being able to see clearly.

Dense fog obscuring the road ahead
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Which motorcycles are covered by driving licence A1?

557. Which motorcycles are covered by driving licence A1?

✓ Motorcycles up to 125 cm³ and 11 kW.
Mopeds only.
Cars up to 3,500 kg.
Motorcycles up to 35 kW.

Category A1 covers motorcycles with an engine capacity of no more than 125 cm³, power of no more than 11 kW, and a power-to-weight ratio of no more than 0.1 kW/kg. It also covers powered tricycles up to 15 kW.

Light motorcycle covered by category A1
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if the charging-system warning light comes on?

558. What should you do if the charging-system warning light comes on?

Continue driving until the battery is completely discharged.
Restart the engine repeatedly to reset the warning.
Increase engine speed until the warning light goes out.
✓ Reduce electrical use, stop safely, and seek assistance.

The alternator or charging system may have failed. The vehicle may stop once the remaining battery charge is exhausted.

Charging-system warning illuminated on the dashboard
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do when a bus signals to pull away from a bus stop?

559. What should you do when a bus signals to pull away from a bus stop?

Accelerate and pass before the bus moves out.
Ignore the signal until the bus starts moving.
✓ Slow down and be prepared to let it move out when safe.
Drive closely beside the bus to prevent it moving out.

Buses may pull away after picking up passengers. Slow down, check the traffic situation, and allow space when it is safe.

Bus signalling to pull away from a stop
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why can temporary road surfaces increase stopping distance?

560. Why can temporary road surfaces increase stopping distance?

Temporary surfaces make the brakes colder.
Temporary roads always slope downhill.
✓ Loose gravel, mud, or uneven material may reduce tyre grip.
Roadworks switch off anti-lock braking.

Temporary surfaces may provide less grip than normal asphalt. Reduce speed and allow more distance for braking.

Loose or uneven road surface through roadworks
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What is the minimum licence for a bus designed for more than 16 passengers?

561. What is the minimum licence for a bus designed for more than 16 passengers?

Licence C.
Licence D1.
Licence D1E.
✓ Licence D.

Category D1 is limited to vehicles designed for no more than 16 passengers in addition to the driver. A bus designed for more than 16 passengers therefore requires category D.

Bus designed for more than 16 passengers
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Which vehicle type is mainly associated with driving licence C?

562. Which vehicle type is mainly associated with driving licence C?

Car.
Bus.
✓ Truck.
Moped.

Driving licence C is mainly associated with trucks. Category C1 covers smaller heavy vehicles, C covers larger heavy vehicles, and C1E and CE allow heavier trailers.

Driving licence card for category C
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this dashboard symbol indicate?

563. What does this dashboard symbol indicate?

✓ Seat belt not fastened.
Airbag-system warning.
Brake-system warning.
Parking brake applied.

This symbol is a seat-belt reminder. It indicates that the driver or another detected occupant has not fastened their seat belt.

Seat-belt reminder symbol on the dashboard
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What is the purpose of the seat-belt retractor?

564. What is the purpose of the seat-belt retractor?

To adjust the seat height.
To release the seat belt from the buckle.
To tighten the parking brake.
✓ To take up slack and lock the belt when necessary.

The seat-belt retractor takes up slack and helps keep the belt properly positioned against the body. It allows normal movement but can lock during sudden braking, rapid belt movement or a collision.

Seat-belt webbing and retracting mechanism
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you check before towing a trailer?

565. What should you check before towing a trailer?

Check the tyres only if the trailer has been unused.
Check the lights after you have started driving.
✓ The coupling, safety connections, lights, tyres, and load.
Check only that the trailer is securely coupled.

The trailer must be correctly connected and roadworthy. Its lights, tyres, safety connections, and load should all be checked.

Checking a trailer before towing
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you normally do before selecting D or R in an automatic vehicle?

566. What should you normally do before selecting D or R in an automatic vehicle?

✓ Press and hold the brake pedal.
Press the accelerator pedal.
Apply the parking brake only.
Switch off the engine.

Before selecting D (Drive) or R (Reverse), keep the brake pedal pressed to prevent the vehicle from moving unexpectedly when the gear is engaged.

Holding the brake before selecting an automatic driving gear
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why is counting drinks an unreliable way to decide whether you can drive?

567. Why is counting drinks an unreliable way to decide whether you can drive?

✓ Drink strength, serving size, and individual effects can vary.
The number of drinks matters more than their strength.
You can judge your alcohol level by how sober you feel.
One drink affects every person in the same way.

Alcohol concentration and serving sizes vary, and factors such as body size, food, medication, and time can affect impairment.

Alcoholic drinks with different strengths and serving sizes
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
How should you use the clutch and accelerator when moving off?

568. How should you use the clutch and accelerator when moving off?

Release the clutch suddenly without using the accelerator.
✓ Release the clutch smoothly while applying the accelerator progressively.
Keep the clutch fully pressed while accelerating.
Press the brake and accelerator together.

When moving off, release the clutch pedal smoothly through the biting point while applying the accelerator progressively. This helps the vehicle move away smoothly without stalling or excessive engine speed.

Coordinating the clutch and accelerator when moving off
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Which motorcycles are covered by driving licence A?

569. Which motorcycles are covered by driving licence A?

Mopeds up to 45 km/h only.
✓ Motorcycles without the A1 or A2 power limits.
Motorcycles up to 35 kW only.
Motorcycles with sidecars only.

Category A covers motorcycles without the power restrictions that apply to categories A1 and A2. It also covers powered tricycles with power exceeding 15 kW.

Motorcycle covered by unrestricted category A
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do when construction vehicles enter or leave the road?

570. What should you do when construction vehicles enter or leave the road?

Drive closely behind it until there is room to pass.
Assume it will stop before entering your lane.
✓ Slow down and be prepared for them to move across your path.
Accelerate before the vehicle reaches the road.

Construction vehicles may move slowly, have limited visibility, or carry loose material. Give them time and space to manoeuvre.

Construction vehicle entering or leaving a road
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What is the general minimum legal tread depth for car tyres in Netherlands?

571. What is the general minimum legal tread depth for car tyres in Netherlands?

1.0 mm.
1.5 mm.
2.0 mm.
✓ 1.6 mm.

The general minimum legal tread depth for car tyres in Netherlands is 1.6 mm. Higher minimums may apply to winter tyres, during winter periods or in winter conditions.

Measuring tread depth on a vehicle tyre
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this vehicle-control symbol indicate?

572. What does this vehicle-control symbol indicate?

Seat-belt reminder.
✓ Passenger airbag deactivation.
Airbag-system fault.
Child safety lock.

This control allows the front passenger airbag to be deactivated on vehicles equipped with this function. The airbag must be deactivated when a rear-facing child restraint is used on the front passenger seat.

Front passenger airbag deactivation control
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
How should you brake on a slippery road?

573. How should you brake on a slippery road?

Brake harder than usual to shorten the stopping distance.
Use the parking brake to help slow the vehicle.
✓ Brake gently and progressively.
Steer sharply while braking to avoid slippery areas.

Sudden braking can cause the wheels to lose grip. Smooth, progressive braking reduces the risk of skidding.

Braking on a slippery road surface
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should a motorcyclist avoid riding in another vehicle's blind spot?

574. Why should a motorcyclist avoid riding in another vehicle's blind spot?

✓ The driver may not be able to see the motorcycle.
The motorcycle's brakes may become less effective.
The motorcycle will use more fuel.
The motorcycle's indicators may be harder to see.

Motorcycles can be difficult to see, particularly when they remain in another vehicle's blind spot. Avoid staying alongside a vehicle where the driver may not see you, and choose a position where you are more likely to be visible.

Motorcycle in another vehicle's blind spot
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do when joining a motorway from an entry lane?

575. What should you do when joining a motorway from an entry lane?

Stop at the end of the entry lane and wait for a large gap.
✓ Match your speed, check around you, and merge into a safe gap.
Force your way into the nearest gap.
Merge as soon as the entry lane begins.

Use the entry lane to build a suitable speed, check carefully, signal, and merge only when it is safe.

Vehicle joining a motorway from an entry lane
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you leave extra space when passing cyclists in strong winds?

576. Why should you leave extra space when passing cyclists in strong winds?

✓ They may be blown sideways unexpectedly.
Cyclists always ride more slowly in strong winds.
Strong wind makes bicycle brakes less effective.
Wind increases the pressure in bicycle tyres.

Strong gusts can affect cyclists' balance and direction. Extra passing space reduces the risk of a collision.

Vehicle passing a cyclist in windy conditions
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if the accelerator becomes stuck while you are driving?

577. What should you do if the accelerator becomes stuck while you are driving?

✓ Select neutral, brake firmly, and steer to a safe stopping place.
Keep driving and wait for the accelerator to release.
Switch off the engine immediately before selecting neutral.
Press the accelerator harder to try to free it.

Selecting neutral disconnects engine power from the wheels. Brake firmly, maintain steering control, and switch off the engine after stopping safely.

Stuck accelerator pedal in a vehicle
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if another driver behaves aggressively towards you?

578. What should you do if another driver behaves aggressively towards you?

Follow them closely to show your disapproval.
Respond with your horn and gestures.
✓ Stay calm, avoid confrontation, and create more distance.
Speed up to prevent them from passing you.

If another driver behaves aggressively, do not retaliate or become involved in a confrontation. Stay calm, increase the distance between you, and let the other vehicle move away when possible. If you feel threatened, go to a safe public place and seek appropriate assistance.

Driver facing aggressive behaviour from another road user
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do before refuelling a petrol or diesel vehicle?

579. What should you do before refuelling a petrol or diesel vehicle?

Keep the engine idling if the vehicle is outside.
Switch on the hazard lights while refuelling.
✓ Switch off the engine before starting to refuel.
Leave the engine running to protect the battery.

Switch off the engine before refuelling. Fuel vapours are flammable, so avoid ignition sources and follow the safety instructions at the filling station. If fuel is spilled, do not start the vehicle until the situation has been made safe.

Vehicle at a pump before refuelling
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
How should pets be carried safely in a vehicle?

580. How should pets be carried safely in a vehicle?

On the driver's lap if they remain calm.
Free to move around during short journeys.
Beside an open window so they can see outside.
✓ Securely restrained so they cannot distract the driver or move dangerously.

A pet moving freely inside a vehicle can distract the driver and may be thrown around during sudden braking or a collision. Use a suitable carrier, harness, barrier, or other secure restraint appropriate for the animal and vehicle.

Pet travelling inside a vehicle
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Using indicators helps other road users understand your intentions.

581. Using indicators helps other road users understand your intentions.

False.
✓ True.

Indicators help communicate your intended direction and improve safety for everyone on the road.

Vehicle signalling its intended direction
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do with the clutch when bringing a manual vehicle to a stop?

582. What should you do with the clutch when bringing a manual vehicle to a stop?

Keep it released until after the vehicle stops.
Pump it repeatedly while braking.
Press it before using the brake pedal.
✓ Press it before the engine begins to stall.

When stopping a manual vehicle, brake normally and press the clutch pedal before the engine speed becomes too low and the engine stalls. Avoid pressing the clutch unnecessarily early, as this reduces engine braking.

Clutch-pedal operation when stopping a manual vehicle
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What is aquaplaning?

583. What is aquaplaning?

✓ When tyres ride on a layer of water and lose contact with the road.
When wet brakes become too hot to work properly.
When water enters the engine and causes it to stop.
When low tyre pressure causes a tyre to burst.

Aquaplaning occurs when water builds up between the tyres and the road, causing a loss of grip and control. The risk increases at higher speeds.

Water separating a tyre from the road surface
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do when passing a horse rider?

584. What should you do when passing a horse rider?

Pass closely to reduce the time beside the horse.
Accelerate while passing to get past quickly.
Flash your headlights before moving alongside.
✓ Slow down and give plenty of space.

Horses can be startled by noise or sudden movement. Slow down, pass carefully, and leave enough space.

Vehicle passing a horse and rider
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if you miss your motorway exit?

585. What should you do if you miss your motorway exit?

✓ Continue to the next exit.
Move onto the shoulder and reverse carefully.
Turn around if traffic is light enough.
Cross the painted separation area back to the exit.

Never reverse or make a sudden manoeuvre. Continue safely and change your route at the next suitable exit.

Vehicle continuing past a motorway exit
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you consider before selecting a lower gear in a manual vehicle?

586. What should you consider before selecting a lower gear in a manual vehicle?

Whether the steering wheel is centred.
Whether the headlights are switched on.
Whether the parking brake is applied.
✓ Whether the vehicle's speed is suitable for the lower gear.

Before selecting a lower gear, make sure the vehicle's speed is suitable for that gear. Selecting too low a gear at excessive speed can cause harsh engine braking and place unnecessary stress on the drivetrain.

Selecting a lower gear in a manual vehicle
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should a front passenger keep their feet off the dashboard?

587. Why should a front passenger keep their feet off the dashboard?

It can prevent the passenger airbag from deploying.
It can make the front seat slide forwards during braking.
It can interfere with the rear-view mirror.
✓ It can greatly increase the risk of injury if the airbag deploys.

A front airbag deploys very quickly and with considerable force. If a passenger has their feet or legs on the dashboard, airbag deployment can force their legs backwards and greatly increase the risk of serious injury. Passengers should sit normally with their feet in the footwell and wear their seat belts correctly. The driver should make sure everyone is seated and restrained safely before setting off.

Passenger resting their feet on the dashboard
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
How should you normally brake on a motorcycle?

588. How should you normally brake on a motorcycle?

✓ Use both brakes smoothly and progressively.
Alternate between the front and rear brakes.
Use only the rear brake.
Use only the front brake.

During normal braking, use both the front and rear brakes smoothly and progressively. The front brake normally provides much of the braking force, while the rear brake also helps slow and stabilise the motorcycle. Sudden or poorly balanced braking can reduce stability or cause a wheel to lose grip.

Motorcyclist using the front and rear brakes
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if exhaust fumes begin entering the car?

589. What should you do if exhaust fumes begin entering the car?

Open the windows and continue to your destination.
Turn up the heater to clear the fumes.
Ignore the fumes if no warning lights appear.
✓ Open the windows, stop safely, leave the vehicle, and seek assistance.

Exhaust gases may contain carbon monoxide, which is poisonous and may not be visible. The exhaust system should be inspected before the vehicle is used again.

Vehicle exhaust fumes and cabin ventilation
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What colour is normally used for the centre line separating opposing traffic in Netherlands?

590. What colour is normally used for the centre line separating opposing traffic in Netherlands?

Yellow.
✓ White.

Roads in Netherlands normally use a white centre line to separate traffic travelling in opposite directions.

Centre-line markings separating opposing traffic
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do when a road worker directs traffic?

591. What should you do when a road worker directs traffic?

✓ Follow the worker's signals and instructions.
Wait for a police officer to confirm the signal.
Follow the vehicle ahead instead of the worker's signal.
Follow the normal traffic signs instead.

Authorised road workers may control traffic through a work zone. Watch carefully and follow their directions.

Road worker directing traffic
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What is the minimum licence for a moped with a design speed over 25 and up to 45 km/h?

592. What is the minimum licence for a moped with a design speed over 25 and up to 45 km/h?

Licence B.
No driving licence is required.
Licence A2.
✓ Licence AM.

Category AM covers certain two- and three-wheeled mopeds with a maximum design speed above 25 km/h and not exceeding 45 km/h, as well as light quadricycles.

Moped with a design speed up to 45 km/h
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this dashboard symbol indicate?

593. What does this dashboard symbol indicate?

Oil-pressure warning.
Engine-temperature warning.
Diesel particulate filter warning.
✓ Engine-management warning.

This symbol indicates a fault detected by the engine-management or emissions-control system. If it remains illuminated while driving, the vehicle should be checked according to the manufacturer's instructions.

Engine-management warning symbol on the dashboard
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do when branches or debris are blowing onto the road?

594. What should you do when branches or debris are blowing onto the road?

Maintain speed and steer around them when necessary.
✓ Slow down and avoid hazards safely.
Change lanes immediately without reducing speed.
Follow the vehicle ahead closely for protection.

Wind can blow unexpected obstacles onto the road. Reduce speed and avoid them safely.

Wind-blown branches and debris on a road
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What is the safest choice if you have consumed alcohol?

595. What is the safest choice if you have consumed alcohol?

✓ Do not drive and arrange a sober form of transport.
Drive slowly and avoid busy roads.
Drive only if you do not feel drunk.
Drink coffee before driving.

Alcohol can impair judgement, coordination, vision, and reaction time. A sober driver, taxi, public transport, or an overnight stay is the safer choice.

Alcohol consumption and the decision not to drive
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if traffic stops inside a tunnel?

596. What should you do if traffic stops inside a tunnel?

Sound the horn continuously until traffic moves.
Reverse toward the tunnel entrance.
✓ Stop at a safe distance and follow signals or instructions.
Drive onto the pedestrian walkway.

Remain calm, keep space from the vehicle ahead, and obey traffic signals, signs, or instructions from tunnel staff.

Traffic stopped inside a road tunnel
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why are roads especially slippery during rain after a dry period?

597. Why are roads especially slippery during rain after a dry period?

The first rain makes the road surface softer.
Tyres need time to adjust to a wet road.
Rain temporarily reduces the weight of the vehicle.
✓ Oil, dust, and dirt mix with water on the road surface.

After a dry period, oil and dirt can build up on the road. The first rain mixes with them and can make the surface very slippery.

Rain falling on a road after dry weather
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this dashboard symbol indicate?

598. What does this dashboard symbol indicate?

✓ Forward-collision warning.
Parking assistance.
Adaptive cruise control.
Lane-departure warning.

This symbol relates to the forward-collision warning or automatic emergency braking system. It may warn the driver when the vehicle detects a risk of collision with traffic ahead.

Forward-collision warning symbol on the dashboard
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
How can higher speed affect fuel or energy consumption?

599. How can higher speed affect fuel or energy consumption?

It has no effect once the vehicle is moving.
It reduces aerodynamic resistance.
It improves tyre efficiency in every situation.
✓ It can increase consumption because air resistance rises.

As speed increases, aerodynamic resistance generally rises, so the vehicle needs more energy to maintain that speed. Driving smoothly at an appropriate speed can therefore reduce fuel or energy consumption.

Vehicle speed and aerodynamic resistance
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should a child use a suitable child restraint?

600. Why should a child use a suitable child restraint?

To allow the child to sit closer to the window.
✓ To reduce the risk of serious injury in a collision.
To make it easier for the child to sleep.
To make the seat belt more comfortable.

A suitable child restraint is designed to protect a child according to their size and development. It helps position and restrain the child correctly, reducing the risk of serious injury in a collision or sudden stop.

Child secured in a suitable car seat
AI-generated by Traffic-rules.com • WCIT • CC BY-SA