QuizTraffic rulesNew Zealand

Test your knowledge with our multiple-choice quiz. Learn from each answer and improve your understanding of the traffic rules and road signs of New Zealand.

For informational purposes only. Always follow official regulations. Some content and images were created with AI assistance.


Why can fog make it difficult to judge the speed of other vehicles?

551. Why can fog make it difficult to judge the speed of other vehicles?

Fog causes vehicles to travel at uneven speeds.
Fog makes road markings appear closer together.
Fog changes the way mirrors show moving vehicles.
✓ Limited visibility makes distances and movement harder to estimate.

Fog reduces visual information, making it harder to judge how far away another vehicle is and how quickly it is approaching.

Other traffic partly obscured by fog
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if it is unsafe to leave a stranded vehicle?

552. What should you do if it is unsafe to leave a stranded vehicle?

Switch off all lights to preserve the battery.
Try to push the vehicle out of the traffic lane.
Walk along the road to find assistance.
✓ Stay inside, use hazard lights, and call the emergency services.

If leaving the vehicle would put you in greater danger, remain restrained, make the vehicle visible, contact the emergency services, and follow their instructions.

Vehicle stranded among moving traffic
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you expect when lanes become narrower in roadworks?

553. What should you expect when lanes become narrower in roadworks?

All vehicles must drive in the centre of the lane.
✓ Less space between your vehicle, barriers, and other traffic.
Temporary lane markings no longer need to be followed.
The speed limit automatically increases.

Narrow lanes leave less room for error. Keep a steady position, avoid drifting toward barriers or nearby vehicles, and reduce speed if necessary.

Narrow traffic lanes through roadworks
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
How can parking too close to a junction affect visibility?

554. How can parking too close to a junction affect visibility?

It affects only the driver of the parked vehicle.
It improves visibility by slowing down traffic.
✓ It can block the view between road users.
It has no effect if the hazard lights are on.

Parking too close to a junction can block visibility. Drivers, cyclists, and pedestrians may have difficulty seeing each other in time.

Parked vehicle obstructing visibility near a junction
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should cyclists do when passing pedestrians on a shared path?

555. What should cyclists do when passing pedestrians on a shared path?

✓ Slow down, give warning, and leave enough space.
Pass quickly before they change direction.
Assume they will hear you approaching.
Pass closely if there is not enough room.

Pedestrians may change direction unexpectedly. A warning and safe passing distance reduce the risk of a collision.

Cyclist passing pedestrians on a shared path
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if your vehicle develops a serious fault while driving?

556. What should you do if your vehicle develops a serious fault while driving?

Accelerate to see if the fault disappears.
Switch off the engine before slowing down.
✓ Keep control, reduce speed, and move to a safe place if possible.
Stop immediately in the traffic lane.

Your first priority is to keep control of the vehicle. Reduce speed smoothly and move out of the path of traffic where possible, signalling when appropriate. Avoid harsh steering or braking unless necessary.

Vehicle stopped after developing a mechanical fault
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Which control is normally used to operate the direction indicators?

557. Which control is normally used to operate the direction indicators?

✓ The steering-column indicator stalk.
The headlight-level control.
The cruise-control button.
The windscreen-wiper stalk.

The direction indicators are normally operated using a stalk beside the steering wheel. Moving the stalk up or down activates the indicators on the corresponding side of the vehicle.

Steering-column stalk for the direction indicators
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do around a damaged electric or hybrid vehicle?

558. What should you do around a damaged electric or hybrid vehicle?

Disconnect exposed electrical components yourself.
Assume the system is safe once the vehicle is switched off.
✓ Keep clear of damaged high-voltage components and call trained assistance.
Inspect damaged cables closely before calling for help.

Electric and hybrid vehicles can contain dangerous high-voltage systems. Do not touch damaged cables, batteries, or electrical components.

Damaged electric vehicle and high-voltage safety risks
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Which side is normally used for overtaking in New Zealand?

559. Which side is normally used for overtaking in New Zealand?

✓ Right-hand side.
Left-hand side.

Drivers normally overtake on the right-hand side in New Zealand.

Vehicle overtaking on the right
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What is the button on a manual handbrake lever used for?

560. What is the button on a manual handbrake lever used for?

To unlock the steering.
To apply the service brakes.
To select reverse gear.
✓ To release the handbrake mechanism.

To release a manual handbrake, pull the lever up slightly, press and hold the release button, then lower the lever under control.

Release button on a manual handbrake lever
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should cyclists do when an emergency vehicle with lights and siren approaches?

561. What should cyclists do when an emergency vehicle with lights and siren approaches?

Keep riding normally and let the driver find a way past.
Stop immediately, even if you are in the traffic lane.
✓ Stay alert and move to a safe position without obstructing it.
Follow closely behind it once it passes.

Emergency vehicles need a clear route. Move predictably and stop only where doing so is safe.

Cyclist near an approaching emergency vehicle
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do with a manual parking brake before driving away?

562. What should you do with a manual parking brake before driving away?

✓ Release it fully.
Leave it partly applied.
Apply it only after moving off.
Pull it up further.

The manual parking brake should be released fully before driving away. Driving with it partly applied can cause unnecessary brake wear and overheating.

Releasing a manual handbrake before driving away
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Which pedal is used to slow down or stop the vehicle?

563. Which pedal is used to slow down or stop the vehicle?

✓ The brake pedal.
The footrest.
The accelerator pedal.
The clutch pedal.

The brake pedal is used to reduce the vehicle's speed or bring it to a stop. In a manual vehicle, it is the middle pedal.

Brake pedal in the driver's footwell
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this dashboard symbol indicate?

564. What does this dashboard symbol indicate?

Front fog lights.
Rear fog lights.
Sidelights.
✓ Main beam.

This symbol indicates that the main beam headlights are switched on. Main beam illuminates the road farther ahead but can dazzle other road users, so it should be changed to dipped headlights when necessary.

Main-beam headlight symbol on the dashboard
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
How should luggage be carried on a bicycle?

565. How should luggage be carried on a bicycle?

On one handlebar if the bag is not very heavy.
On one side of the bicycle to leave the other side clear.
✓ Securely, without affecting steering, braking, or balance.
On the rear carrier without securing it for a short trip.

Loose or badly positioned luggage can interfere with control, become caught in the wheels, or hide bicycle lights.

Luggage carried on a bicycle
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do when reversing with a trailer?

566. What should you do when reversing with a trailer?

Watch only the trailer and ignore surrounding traffic.
✓ Reverse slowly and make small steering corrections.
Reverse quickly to keep the trailer straight.
Ask a guide to stand directly behind the trailer.

Trailers react quickly to steering while reversing. Move slowly, observe carefully, and use a guide only from a safe visible position.

Vehicle reversing with a trailer
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should unnecessary engine idling be avoided?

567. Why should unnecessary engine idling be avoided?

✓ It uses fuel without moving the vehicle.
It prevents the battery from charging.
It always causes the engine to overheat.
It immediately damages the brakes.

An idling combustion engine uses fuel while the vehicle is stationary. Avoid unnecessary idling where it is safe and appropriate to switch the engine off, taking account of the vehicle manufacturer's instructions and local rules.

Stationary vehicle with its engine idling
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What may happen when you press the accelerator fully in an automatic vehicle?

568. What may happen when you press the accelerator fully in an automatic vehicle?

The transmission selects Park.
The parking brake applies automatically.
The engine switches off.
✓ The transmission may shift to a lower gear for stronger acceleration.

In many automatic vehicles, pressing the accelerator fully can activate kickdown, causing the transmission to select a lower gear and provide stronger acceleration.

Accelerator-pedal operation for automatic kickdown
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
How can alcohol affect your driving ability?

569. How can alcohol affect your driving ability?

✓ It can reduce judgement, coordination, and reaction speed.
It makes your reactions faster.
It improves your ability to judge distance.
It has no effect if you drive slowly.

Alcohol affects several abilities needed for safe driving, including concentration, decision-making, coordination, and hazard perception.

Alcohol impairment and driving ability
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do with the clutch when bringing a manual vehicle to a stop?

570. What should you do with the clutch when bringing a manual vehicle to a stop?

Pump it repeatedly while braking.
✓ Press it before the engine begins to stall.
Keep it released until after the vehicle stops.
Press it before using the brake pedal.

When stopping a manual vehicle, brake normally and press the clutch pedal before the engine speed becomes too low and the engine stalls. Avoid pressing the clutch unnecessarily early, as this reduces engine braking.

Clutch-pedal operation when stopping a manual vehicle
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you slow down near schools or playgrounds?

571. Why should you slow down near schools or playgrounds?

✓ Children may behave unpredictably.
Children always have priority near schools.
Children are easier to see when you drive slowly.
School zones are closed to normal traffic.

Children may suddenly cross the road or move unexpectedly, so drivers should slow down and stay alert near schools and playgrounds.

Vehicle approaching a school or playground area
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you make sure drivers have seen you before crossing?

572. Why should you make sure drivers have seen you before crossing?

✓ To reduce the risk of stepping into their path.
A driver who sees you can always stop in time.
Making eye contact gives you priority.
Eye contact means the driver must stop for you.

Before crossing, make sure approaching drivers have noticed you and that it is safe to proceed. Do not assume that a driver will stop simply because you have seen each other.

Pedestrian checking whether an approaching driver has seen them
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
How can higher speed affect fuel or energy consumption?

573. How can higher speed affect fuel or energy consumption?

It reduces aerodynamic resistance.
✓ It can increase consumption because air resistance rises.
It always reduces consumption.
It improves tyre efficiency in every situation.

As speed increases, aerodynamic resistance generally rises, so the vehicle needs more energy to maintain that speed. Driving smoothly at an appropriate speed can therefore reduce fuel or energy consumption.

Vehicle speed and aerodynamic resistance
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this dashboard symbol indicate?

574. What does this dashboard symbol indicate?

✓ Parking brake applied.
Low tyre pressure.
Power-steering fault.
Brake pads worn.

This symbol indicates that the parking brake is applied. It should normally go out when the parking brake is fully released.

Parking-brake indicator symbol on the dashboard
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if your main beam could dazzle another driver?

575. What should you do if your main beam could dazzle another driver?

Keep the main beam on unless the other driver flashes you.
Flash the main beam briefly before passing.
Move farther from the centre and keep the main beam on.
✓ Switch to dipped headlights.

Main beam can dazzle other road users and reduce their visibility. Switch to dipped headlights whenever your main beam could dazzle another driver.

Headlight glare affecting another road user
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
How should cyclists ride when travelling in a group?

576. How should cyclists ride when travelling in a group?

Ride side by side even when traffic cannot pass safely.
Ride as close together as possible to stay as one group.
✓ Predictably, with safe gaps and clear communication.
Follow the cyclist ahead without checking traffic yourself.

Safe spacing and communication help group members respond to braking, turns, obstacles, and changing traffic conditions.

Group of cyclists riding along a road
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does it mean to cover the brake pedal?

577. What does it mean to cover the brake pedal?

Apply the parking brake slightly.
✓ Position your right foot over the brake, ready to press it.
Rest your foot lightly on the brake while driving.
Press the brake and accelerator together.

To cover the brake, move your right foot over the brake pedal without pressing it, so you are ready to brake quickly if a hazard develops.

Right foot positioned over the brake pedal
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you avoid using an ordinary extension lead to charge an electric vehicle?

578. Why should you avoid using an ordinary extension lead to charge an electric vehicle?

It will always charge the vehicle too quickly.
✓ It may overheat because it is not designed for continuous high-power charging.
It prevents the charging port from closing afterwards.
It can make the vehicle battery lose capacity immediately.

An ordinary household extension lead may not be designed for the sustained electrical load required for EV charging and can overheat. Use suitable approved charging equipment and follow the vehicle and charging-equipment manufacturer's instructions.

Extension lead used for electric-vehicle charging
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if steam begins coming from underneath the bonnet?

579. What should you do if steam begins coming from underneath the bonnet?

✓ Stop safely, switch off the engine, and keep clear until it has cooled.
Open the coolant cap to release the pressure.
Keep the engine running so the cooling system keeps working.
Continue driving slowly until the steam stops.

Steam can indicate an overheated and pressurised cooling system. Do not remove the coolant cap while the system is hot.

Steam rising from underneath a vehicle's bonnet
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you leave extra space when passing road workers?

580. Why should you leave extra space when passing road workers?

✓ They may be working close to moving traffic.
To avoid damaging temporary road markings.
Road workers are protected by the construction barriers.
Road workers always have priority over passing traffic.

Workers may be only a short distance from passing vehicles. Reduce speed and leave as much safe space as possible.

Vehicle passing workers close to the road
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you reduce speed when approaching roadworks?

581. Why should you reduce speed when approaching roadworks?

You should not reduce speed near roadworks.
To reduce wear on the vehicle suspension.
To keep construction dust off the windscreen.
✓ Road workers, narrow lanes, and unexpected hazards may be present.

Roadworks can involve workers, machinery, changing lane layouts, and uneven surfaces. Lower speed gives you more time to react.

Vehicle approaching a roadworks area
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if you see fallen rocks on a mountain road?

582. What should you do if you see fallen rocks on a mountain road?

✓ Slow down and avoid them smoothly when safe.
Stop beside the rocks to inspect the road.
Move toward the centre of the road without slowing down.
Maintain speed and drive over smaller stones.

Loose rocks can damage tyres, affect steering, or block part of the road. Reduce speed and avoid sudden movements. If rocks are actively falling, do not enter or stop in the danger area. Keep a safe distance and, if necessary, wait in a safe place until it is safe to continue.

Fallen rocks on a mountain road
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What normally happens to cruise control when you press the brake pedal?

583. What normally happens to cruise control when you press the brake pedal?

The parking brake is applied.
The accelerator pedal locks in position.
The selected speed increases.
✓ Cruise control is cancelled or temporarily disengaged.

Pressing the brake pedal normally cancels or temporarily disengages cruise control, returning speed control to the driver.

Brake-pedal operation to disengage cruise control
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should a seat belt not be twisted when worn?

584. Why should a seat belt not be twisted when worn?

A twisted belt prevents the airbags from working.
✓ A flat belt spreads collision forces more effectively.
A twisted belt can cause the buckle to open.
A flat belt makes the seat easier to adjust.

A seat belt should lie flat against the body without twists. A twisted belt concentrates force over a smaller area and may provide less effective protection in a collision.

Twisted seat belt across an occupant's body
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you leave extra space when following a large vehicle?

585. Why should you leave extra space when following a large vehicle?

✓ To improve your view ahead and give yourself more time to react.
To reduce the amount of fuel your vehicle uses.
To make overtaking possible without checking ahead.
To make it easier for the large vehicle to accelerate.

A large vehicle can block your view of traffic, signs, junctions, or hazards ahead. Leaving extra space improves your view and gives you more time to react if traffic slows or a hazard develops.

Large vehicle limiting a following driver's view
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should cyclists do before turning or changing position on the road?

586. What should cyclists do before turning or changing position on the road?

✓ Look behind, signal clearly, and move only when safe.
Signal and turn without checking behind.
Signal only when a vehicle is close behind.
Look behind only after starting the turn.

Checking behind and signalling gives other road users time to understand what you intend to do.

Cyclist preparing to turn or change road position
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Which distance unit is used on road signs in New Zealand?

587. Which distance unit is used on road signs in New Zealand?

Miles.
✓ Kilometres.

Road distances in New Zealand are normally shown in kilometres.

Distance units used on road signs
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
You should adjust your mirrors before you start driving.

588. You should adjust your mirrors before you start driving.

✓ True.
False.

Properly adjusted mirrors improve visibility and help you monitor traffic around your vehicle.

Driver adjusting a mirror before setting off
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Which road markings should you follow through roadworks?

589. Which road markings should you follow through roadworks?

Use the markings intended for construction vehicles.
Use whichever markings give you the shortest route.
Ignore markings and follow only the vehicle ahead.
✓ The temporary markings that show the current traffic route.

Temporary road markings may replace the normal lane layout during roadworks. Follow the markings and signs that currently guide traffic.

Temporary road markings through a roadworks area
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do when a traffic light turns red?

590. What should you do when a traffic light turns red?

Stop only if other traffic is approaching.
Continue if the junction appears clear.
✓ Stop and wait until you may proceed.
Follow the vehicle ahead through the junction.

A red traffic light means you must stop before the stop line, pedestrian crossing, or intersection unless a sign or signal indicates otherwise.

Red traffic light at a junction
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you not rely only on a reversing camera?

591. Why should you not rely only on a reversing camera?

✓ It may not show everything around the vehicle.
It makes mirrors unnecessary when reversing.
It shows every blind spot around the vehicle.
It guarantees that the path behind is clear.

Reversing cameras can help, but they may have blind spots and limited coverage. Always check your mirrors and surroundings, look around where possible, and reverse slowly.

Reversing-camera display inside a vehicle
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this vehicle-control symbol indicate?

592. What does this vehicle-control symbol indicate?

Front windscreen demister.
✓ Air conditioning.
Fan speed.
Air recirculation.

The A/C symbol controls the vehicle's air-conditioning system. Air conditioning can cool and dehumidify the air inside the vehicle, which can also help clear mist from the windows.

Air-conditioning control with the A/C symbol
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this vehicle-control symbol indicate?

593. What does this vehicle-control symbol indicate?

Window lock.
Mirror adjustment.
✓ Electric window control.
Child safety lock.

This control operates the vehicle's electric windows. Pressing or pulling the switch lowers or raises the corresponding window.

Switch for operating an electric window
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why must a roof load be securely attached?

594. Why must a roof load be securely attached?

Because the roof will hold the load in place while driving.
To stop the roof rack from increasing fuel consumption.
✓ It could shift or fall and create a serious hazard.
To keep the vehicle within its normal height.

A roof load is exposed to strong airflow and movement. It must be restrained correctly and kept within the permitted limits.

Load secured to a vehicle's roof
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do when traffic lights change to amber as you approach?

595. What should you do when traffic lights change to amber as you approach?

✓ Stop if you can do so safely.
Accelerate to pass before the light turns red.
Continue at the same speed if the junction looks clear.
Treat it like a green light until it turns red.

An amber light warns that the signal is changing. Stop if it is safe, but avoid sudden braking that could cause danger behind you.

Vehicle approaching an amber traffic light
AI-generated by Traffic-rules.com • WCIT • CC BY-SA