QuizTraffic rulesPeru

This interesting quiz helps you test your knowledge in a clear and visual way. With easy multiple-choice questions, you can quickly build confidence and learn new facts while keeping it simple, interactive, and fun.


What should you do if you approach slow-moving farm machinery?

351. What should you do if you approach slow-moving farm machinery?

Overtake as soon as the road becomes slightly wider.
✓ Keep a safe distance and overtake only when safe.
Use your horn so the driver moves aside.
Drive close behind until there is room to pass.

Farm machinery may be wide, slow, or turn unexpectedly. Keep distance and only overtake when you have a clear view and enough space.

Vehicle approaching slow-moving farm machinery
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should an unused roof rack or roof box be removed?

352. Why should an unused roof rack or roof box be removed?

It reduces the vehicle's braking power.
✓ It can increase aerodynamic drag and energy use.
It increases tyre pressure.
It prevents the battery from charging.

An unused roof rack or roof box increases aerodynamic drag, particularly at higher speeds. Removing it when it is not needed can reduce fuel or energy consumption.

Roof rack or roof box fitted to a vehicle
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if a seat belt is frayed or damaged?

353. What should you do if a seat belt is frayed or damaged?

Cover the damaged section and continue using it.
Twist the damaged section so it cannot tear further.
Wear the belt loosely to reduce strain on it.
✓ Have it inspected and replaced before relying on it.

A damaged seat belt may not provide proper protection in a collision. Frayed webbing, damaged buckles, faulty retractors, or other defects should be professionally inspected and repaired or replaced before the seat belt is relied upon.

Frayed or damaged seat-belt webbing
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What is the button on a seat-belt buckle used for?

354. What is the button on a seat-belt buckle used for?

To tighten the shoulder belt.
To lock the seat in position.
✓ To release the seat belt.
To adjust the belt height.

Pressing the button on the seat-belt buckle releases the latch so the belt can be unfastened. Keep the seat belt fastened whenever required while the vehicle is moving.

Release button on a seat-belt buckle
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why can loud music be dangerous while cycling?

355. Why can loud music be dangerous while cycling?

✓ You may not hear traffic or warning sounds.
It makes the bicycle harder to balance.
It makes bicycle lights less effective.
It reduces the grip of the tyres.

Hearing approaching vehicles, bells, horns, and other warning sounds is an important part of staying aware.

Cyclist listening to music near traffic
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you expect after one wild animal crosses the road?

356. What should you expect after one wild animal crosses the road?

✓ More animals may follow.
Wild animals normally cross roads one at a time.
The road is likely to remain clear.
The animal will usually return the same way.

Many animals travel in groups. Slow down and continue watching both sides of the road.

Wild animals crossing a road
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do before leaving a motorway?

357. What should you do before leaving a motorway?

Cross several lanes at the last moment.
Signal only after entering the exit lane.
Wait until the exit begins before checking your mirrors.
✓ Check your mirrors, signal in good time, and enter the exit lane safely.

Plan your exit early, move into the correct lane safely, and reduce speed after entering the exit road where appropriate.

Vehicle preparing to take a motorway exit
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
You may ignore a stop sign if the road looks empty.

358. You may ignore a stop sign if the road looks empty.

True.
✓ False.

A stop sign means you must come to a complete stop, even if no other traffic is visible.

Stop sign at a quiet junction
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this dashboard symbol indicate?

359. What does this dashboard symbol indicate?

Parking brake applied.
✓ Seat belt not fastened.
Brake-system warning.
Airbag-system warning.

This symbol is a seat-belt reminder. It indicates that the driver or another detected occupant has not fastened their seat belt.

Seat-belt reminder symbol on the dashboard
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if steam begins coming from underneath the bonnet?

360. What should you do if steam begins coming from underneath the bonnet?

Continue driving slowly until the steam stops.
Pour cold water over the engine immediately.
Keep the engine running so the cooling system keeps working.
✓ Stop safely, switch off the engine, and keep clear until it has cooled.

Steam can indicate an overheated and pressurised cooling system. Do not remove the coolant cap while the system is hot.

Steam rising from underneath a vehicle's bonnet
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Which selector position is used for normal forward driving?

361. Which selector position is used for normal forward driving?

P (Park).
R (Reverse).
N (Neutral).
✓ D (Drive).

Select D (Drive) for normal forward driving in a vehicle with an automatic transmission. The transmission then selects the appropriate gear automatically.

Automatic gear selector with P, R, N and D positions
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this vehicle-control button operate?

362. What does this vehicle-control button operate?

The parking brake.
The hazard warning lights.
The central locking system.
✓ The engine or drive system.

The engine start/stop button is used to start or switch off the vehicle's engine or electric drive system. Starting the vehicle normally also requires the brake or clutch pedal to be pressed.

Engine start/stop button in a vehicle
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
How should a disabled vehicle be towed?

363. How should a disabled vehicle be towed?

With nobody controlling the disabled vehicle.
At the highest possible safe speed.
✓ Use approved towing points and a method permitted by local rules.
By attaching a rope to the bumper.

Incorrect towing can damage the vehicle or cause loss of control. Follow the manufacturer's instructions and local rules, and use professional recovery when the correct procedure is uncertain.

Disabled vehicle being towed
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Can coffee, energy drinks, fresh air, or loud music replace proper rest when you are tired?

364. Can coffee, energy drinks, fresh air, or loud music replace proper rest when you are tired?

Yes, but only during daylight.
Yes, if the journey is less than one hour.
Only coffee can replace proper rest.
✓ No, they may only increase alertness temporarily.

Coffee, energy drinks, fresh air, or loud music may make you feel more alert for a short time, but they do not remove fatigue. If you are too tired to drive safely, stop somewhere safe and get proper rest.

Stimulant drinks and driver tiredness
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if a child runs onto the road ahead?

365. What should you do if a child runs onto the road ahead?

Accelerate to pass before the child moves further into the road.
Swerve immediately into the opposite lane.
Flash your lights instead of slowing down.
✓ Brake firmly and be prepared to stop.

Children can act unpredictably. Brake firmly, stay alert, and be prepared for more children to follow.

Child entering the road ahead of a vehicle
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What is the safest choice if you have consumed alcohol?

366. What is the safest choice if you have consumed alcohol?

✓ Do not drive and arrange a sober form of transport.
Drive slowly and avoid busy roads.
Drink coffee before driving.
Eat something and wait a short while.

Alcohol can impair judgement, coordination, vision, and reaction time. A sober driver, taxi, public transport, or an overnight stay is the safer choice.

Alcohol consumption and the decision not to drive
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this dashboard symbol indicate?

367. What does this dashboard symbol indicate?

✓ Lane-departure warning.
Electronic stability control.
Adaptive cruise control.
Parking assistance.

This symbol relates to the lane-departure warning or lane-keeping system. The system monitors the vehicle's position within its lane and may warn the driver if the vehicle begins to leave the lane unintentionally.

Lane-departure warning symbol on the dashboard
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if your vehicle begins to skid on ice?

368. What should you do if your vehicle begins to skid on ice?

✓ Ease off the accelerator and steer smoothly in the direction you want to travel.
Steer rapidly from side to side.
Press the brake pedal hard and hold it.
Apply the parking brake to straighten the vehicle.

Avoid sudden braking or steering. Look where you want to go and use gentle controls while the tyres regain grip.

Vehicle skidding on an icy road
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do when approaching a temporary lane closure?

369. What should you do when approaching a temporary lane closure?

Merge without checking if traffic is moving slowly.
Reverse back the way you came.
Follow construction vehicles through the closed lane.
✓ Follow the temporary signs and merge safely when required.

Observe the temporary signs, adjust your speed, and merge safely according to the traffic situation and local rules.

Temporary traffic-lane closure ahead
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Where should passengers wait after safely leaving a broken-down vehicle?

370. Where should passengers wait after safely leaving a broken-down vehicle?

✓ In a protected place well away from moving traffic.
Wait close beside the vehicle where drivers can see you.
Wait in the traffic lane until help arrives.
Wait just behind the vehicle away from the traffic lane.

Move passengers, children, and pets away from the carriageway. On high-speed roads, wait behind a safety barrier where possible.

Passengers moving away from a broken-down vehicle
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Are motorcycle riders generally required to wear a helmet in Peru?

371. Are motorcycle riders generally required to wear a helmet in Peru?

No.
✓ Yes.

Motorcycle riders in Peru are generally required to wear an approved helmet.

Motorcyclist wearing a protective helmet
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if traffic stops inside a tunnel?

372. What should you do if traffic stops inside a tunnel?

✓ Stop at a safe distance and follow signals or instructions.
Drive onto the pedestrian walkway.
Sound the horn continuously until traffic moves.
Reverse toward the tunnel entrance.

Remain calm, keep space from the vehicle ahead, and obey traffic signals, signs, or instructions from tunnel staff.

Traffic stopped inside a road tunnel
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you reduce speed in fog?

373. Why should you reduce speed in fog?

✓ Because you have less time to react to hazards you cannot see.
To reduce fuel consumption.
To prevent moisture from entering the engine.
To prevent the windscreen from misting.

Fog can hide obstacles, pedestrians, and other vehicles. Lower speed gives you more time to react.

Fog limiting a driver's view ahead
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Which selector position is used when parking the vehicle?

374. Which selector position is used when parking the vehicle?

D (Drive).
N (Neutral).
✓ P (Park).
R (Reverse).

Select P (Park) when parking an automatic vehicle. Park locks the transmission, but the parking brake should also be applied to secure the vehicle.

Automatic gear selector with P, R, N and D positions
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do before refuelling a petrol or diesel vehicle?

375. What should you do before refuelling a petrol or diesel vehicle?

Leave the engine running to protect the battery.
Switch on the hazard lights while refuelling.
✓ Switch off the engine before starting to refuel.
Increase the engine speed before removing the fuel cap.

Switch off the engine before refuelling. Fuel vapours are flammable, so avoid ignition sources and follow the safety instructions at the filling station. If fuel is spilled, do not start the vehicle until the situation has been made safe.

Vehicle at a pump before refuelling
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do when driving near animals?

376. What should you do when driving near animals?

✓ Slow down and be ready to stop.
Sound your horn to make them move away.
Maintain speed if they remain beside the road.
Move closer so you can pass before they react.

Animals can move unpredictably. Slow down, stay alert, and be prepared to stop safely.

Animals near moving road traffic
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do when a bus signals to pull away from a bus stop?

377. What should you do when a bus signals to pull away from a bus stop?

✓ Slow down and be prepared to let it move out when safe.
Sound your horn so the bus waits for you.
Accelerate and pass before the bus moves out.
Drive closely beside the bus to prevent it moving out.

Buses may pull away after picking up passengers. Slow down, check the traffic situation, and allow space when it is safe.

Bus signalling to pull away from a stop
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What do the + and − controls of cruise control normally do?

378. What do the + and − controls of cruise control normally do?

✓ Increase or decrease the selected cruising speed.
Switch between cruise control and the speed limiter.
Change the transmission gear.
Apply or release the parking brake.

When cruise control is active, the + and − controls normally increase or decrease the selected cruising speed. The amount of each adjustment can vary between vehicles.

Plus and minus controls for the cruising speed
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if your vehicle catches fire?

379. What should you do if your vehicle catches fire?

Open the bonnet fully to find where the fire started.
Stay inside the vehicle while waiting for assistance.
✓ Stop, switch off the engine, evacuate everyone, and call the emergency services.
Keep driving slowly until you find a safer place to stop.

Move everyone well away from the vehicle and call emergency services. If the fire is small and it is safe to do so, use a suitable fire extinguisher. Opening the bonnet fully can supply additional oxygen and cause the fire to intensify.

Vehicle with a fire breaking out
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you take extra care when crossing a tram or bus lane?

380. Why should you take extra care when crossing a tram or bus lane?

You only need to check for traffic from one direction.
Cars always have priority over trams and buses.
Trams and buses must always stop before crossings.
✓ A tram or bus may approach quickly.

Check carefully before crossing or entering a tram or bus lane. Trams cannot steer around obstacles, and both trams and buses may need significant distance to stop.

Traffic crossing a lane used by public transport
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if your main beam could dazzle another driver?

381. What should you do if your main beam could dazzle another driver?

Keep the main beam on unless the other driver flashes you.
✓ Switch to dipped headlights.
Reduce speed but leave the main beam on.
Flash the main beam briefly before passing.

Main beam can dazzle other road users and reduce their visibility. Switch to dipped headlights whenever your main beam could dazzle another driver.

Headlight glare affecting another road user
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if a direction indicator does not cancel after a turn?

382. What should you do if a direction indicator does not cancel after a turn?

✓ Return the indicator control to its neutral position.
Leave it flashing until the next turn.
Switch on the hazard warning lights.
Press the horn.

Direction indicators often cancel automatically after a turn, but if an indicator remains on, return the indicator control to its neutral position so you do not mislead other road users.

Returning the indicator stalk to its neutral position
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should a motorcyclist avoid riding in another vehicle's blind spot?

383. Why should a motorcyclist avoid riding in another vehicle's blind spot?

The motorcycle's brakes may become less effective.
The vehicle ahead must always change lanes.
The motorcycle's indicators may be harder to see.
✓ The driver may not be able to see the motorcycle.

Motorcycles can be difficult to see, particularly when they remain in another vehicle's blind spot. Avoid staying alongside a vehicle where the driver may not see you, and choose a position where you are more likely to be visible.

Motorcycle in another vehicle's blind spot
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you be cautious when following a vehicle carrying a loose load?

384. Why should you be cautious when following a vehicle carrying a loose load?

The vehicle must stop whenever the load shifts.
✓ Objects may fall onto the road.
The vehicle must always travel at a lower speed.
Loose loads prevent the driver from using the mirrors.

A poorly secured load can fall or shift suddenly. Keep extra distance and avoid following too closely.

Vehicle carrying an unsecured load ahead
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if a pedestrian is crossing slowly?

385. What should you do if a pedestrian is crossing slowly?

Move forward slowly to show that you are waiting.
Pass as soon as they have cleared your part of the road.
Sound your horn to encourage them to cross faster.
✓ Wait patiently and let them finish crossing.

Some pedestrians may need more time to cross. Stay patient, keep a safe distance, and do not pressure them.

Pedestrian crossing the road slowly
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if you realise you have put the wrong fuel in your vehicle?

386. What should you do if you realise you have put the wrong fuel in your vehicle?

Drive until the fuel warning light comes on.
Start the engine and drive slowly to use the fuel.
✓ Do not start the engine, and seek assistance.
Rev the engine briefly to mix the fuels.

If you have used the wrong fuel, do not start the engine. Starting it can circulate the incorrect fuel and cause further damage. If possible, avoid switching on the ignition and seek appropriate roadside or workshop assistance.

Fuel nozzle and the risk of misfuelling
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if your vehicle breaks down inside a road tunnel?

387. What should you do if your vehicle breaks down inside a road tunnel?

Leave the vehicle and walk along the road to find help.
Make a U-turn and drive toward the nearest exit.
Reverse toward the tunnel entrance if traffic is light.
✓ Move aside if possible, use hazard lights, and call for assistance.

If possible, stop in an emergency bay or another safe place and use the hazard lights. Contact tunnel control using an emergency telephone or other available assistance system, and follow the tunnel signs and instructions.

Broken-down vehicle inside a road tunnel
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you slow down before a sharp bend?

388. Why should you slow down before a sharp bend?

✓ To keep control of the vehicle.
To make the steering feel lighter.
To reduce fuel consumption.
To prevent other vehicles from overtaking.

Sharp bends reduce your view and can make the vehicle harder to control, so you should slow down before entering the bend.

Vehicle approaching a sharp bend
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if EV charging equipment becomes unusually hot or smells burnt?

389. What should you do if EV charging equipment becomes unusually hot or smells burnt?

Pour water over the equipment to cool it.
Keep charging until the vehicle reaches full charge.
Cover the equipment to contain the heat.
✓ Stop the charging session, keep clear, and report the fault.

Unusual heat, a burning smell, smoke, sparks, or repeated charging faults can indicate an electrical problem. Stop using the charging equipment if it is safe to do so, keep clear of anything damaged or overheating, and report the fault or seek appropriate assistance.

Faulty electric-vehicle charging equipment
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do about a flat tyre on a high-speed road?

390. What should you do about a flat tyre on a high-speed road?

Drive slowly on the damaged tyre to the next exit.
Repair the tyre beside the traffic lane using hazard lights.
✓ Move to a protected location if possible and call for professional recovery.
Stop immediately and change the tyre where you are.

Changing a wheel close to high-speed traffic is extremely dangerous. Move away from traffic and use professional assistance.

Vehicle stopped with a flat tyre on a high-speed road
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you leave a safe following distance inside a tunnel?

391. Why should you leave a safe following distance inside a tunnel?

To make it easier for other vehicles to overtake.
✓ You need enough space to react if traffic slows or stops.
Because tunnels usually have a poor road surface.
Because vehicles ahead cannot see you in their mirrors.

Limited space and visibility can make incidents inside tunnels especially dangerous. A safe gap gives you more time to react.

Gap between vehicles travelling through a tunnel
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if the vehicle consistently pulls to one side?

392. What should you do if the vehicle consistently pulls to one side?

Increase speed to see if the vehicle straightens.
Reduce pressure in the tyre on the opposite side.
Ignore it if the tyres appear normal.
✓ Check the tyre pressures and have the steering, alignment, and brakes inspected.

Persistent pulling can be caused by incorrect tyre pressure, wheel misalignment, suspension wear, or a braking fault. It should not be ignored.

Vehicle pulling to one side while travelling
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do after fitting a temporary spare wheel?

393. What should you do after fitting a temporary spare wheel?

✓ Follow its speed and distance restrictions and replace it as soon as possible.
Ignore its speed restriction on short journeys.
Drive normally if the vehicle feels stable.
Use it as a permanent replacement if it looks undamaged.

Temporary spare wheels may have limited speed, distance, and handling capabilities. Arrange a proper repair or replacement promptly.

Temporary spare wheel fitted to a vehicle
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
You should always wear a seat belt, even on short trips.

394. You should always wear a seat belt, even on short trips.

False.
✓ True.

Seat belts reduce the risk of serious injury and should be worn on every trip, even short ones.

Driver wearing a seat belt for a car journey
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Which road markings should you follow through roadworks?

395. Which road markings should you follow through roadworks?

Use the markings intended for construction vehicles.
Follow the old permanent markings if they are still visible.
✓ The temporary markings that show the current traffic route.
Ignore markings and follow only the vehicle ahead.

Temporary road markings may replace the normal lane layout during roadworks. Follow the markings and signs that currently guide traffic.

Temporary road markings through a roadworks area
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if your vehicle begins rolling backward on a steep incline?

396. What should you do if your vehicle begins rolling backward on a steep incline?

Let it roll backwards and try again.
Switch off the engine and restart immediately.
✓ Apply the brake, secure the vehicle, and restart carefully.
Accelerate while continuing to roll backward.

Stop the vehicle under control, apply the parking brake if necessary, and prepare to move away again safely.

Vehicle rolling backwards on a steep incline
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if one of your tyres suddenly bursts while driving?

397. What should you do if one of your tyres suddenly bursts while driving?

✓ Hold the steering wheel firmly and slow down gradually.
Accelerate briefly to stabilise the vehicle.
Release the steering wheel and let the vehicle slow itself.
Steer quickly toward the side of the road.

A tyre burst can make the vehicle unstable. Hold the wheel firmly, avoid sudden braking or steering, and slow down gradually.

Vehicle tyre damaged by a sudden blowout
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this vehicle-control symbol indicate?

398. What does this vehicle-control symbol indicate?

Central door locking.
Mirror adjustment.
Child safety lock.
✓ Electric window control.

This control operates the vehicle's electric windows. Pressing or pulling the switch lowers or raises the corresponding window.

Switch for operating an electric window
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you avoid using an ordinary extension lead to charge an electric vehicle?

399. Why should you avoid using an ordinary extension lead to charge an electric vehicle?

It can make the vehicle battery lose capacity immediately.
✓ It may overheat because it is not designed for continuous high-power charging.
It will always charge the vehicle too quickly.
It prevents the charging port from closing afterwards.

An ordinary household extension lead may not be designed for the sustained electrical load required for EV charging and can overheat. Use suitable approved charging equipment and follow the vehicle and charging-equipment manufacturer's instructions.

Extension lead used for electric-vehicle charging
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you normally do with the gearbox during a longer stop in a manual vehicle?

400. What should you normally do with the gearbox during a longer stop in a manual vehicle?

Select reverse gear.
Keep first gear selected with the clutch pressed.
Keep the accelerator pressed.
✓ Select neutral and release the clutch.

During a longer stop, selecting neutral and releasing the clutch can reduce unnecessary strain on the clutch release mechanism. Keep the vehicle securely held with the brake or parking brake as appropriate.

Neutral gear selection during a longer stop
AI-generated by Traffic-rules.com • WCIT • CC BY-SA