QuizTraffic rulesSweden

This interesting quiz helps you test your knowledge in a clear and visual way. With easy multiple-choice questions, you can quickly build confidence and learn new facts while keeping it simple, interactive, and fun.


How should a disabled vehicle be towed?

251. How should a disabled vehicle be towed?

By attaching a rope to the bumper.
✓ Use approved towing points and a method permitted by local rules.
Without checking the steering or brakes.
At the highest possible safe speed.

Incorrect towing can damage the vehicle or cause loss of control. Follow the manufacturer's instructions and local rules, and use professional recovery when the correct procedure is uncertain.

Disabled vehicle being towed
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you expect when leaving a sheltered area during strong winds?

252. What should you expect when leaving a sheltered area during strong winds?

✓ A sudden gust may affect your vehicle.
Your steering may become lighter.
The road surface may suddenly become more slippery.
Higher speed limits.

Buildings, trees, and other obstacles can block wind. When you leave shelter, a sudden gust may push your vehicle.

Vehicle leaving a sheltered stretch of road
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What is the minimum licence for a motorcycle with more than 35 kW?

253. What is the minimum licence for a motorcycle with more than 35 kW?

Licence A1.
✓ Licence A.
Licence B.
Licence A2.

Category A2 is limited to motorcycles with power not exceeding 35 kW. A motorcycle with more than 35 kW therefore requires category A.

Motorcycle with more than 35 kW
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should cyclists do before turning or changing position on the road?

254. What should cyclists do before turning or changing position on the road?

Look behind only after starting the turn.
Signal and turn without checking behind.
✓ Look behind, signal clearly, and move only when safe.
Signal only when a vehicle is close behind.

Checking behind and signalling gives other road users time to understand what you intend to do.

Cyclist preparing to turn or change road position
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this dashboard symbol indicate?

255. What does this dashboard symbol indicate?

✓ Dipped headlights.
Front fog lights.
Main beam.
Sidelights.

This symbol indicates that the dipped headlights are switched on. Dipped headlights illuminate the road ahead while limiting glare for other road users.

Dipped-headlight symbol on the dashboard
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you avoid travelling with the seatback excessively reclined?

256. Why should you avoid travelling with the seatback excessively reclined?

✓ It can reduce how effectively the seat belt restrains you.
It can prevent the head restraint from being adjusted.
It can cause the seat belt to lock during normal driving.
It can cause the seat to slide forwards when braking.

An excessively reclined seat can affect how the seat belt fits and restrains your body and may increase the risk of sliding under the lap belt in a collision. Sit in a reasonably upright position so the lap belt stays low across the hips and the shoulder belt lies correctly across the chest.

Vehicle seat with an excessively reclined backrest
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you not drive too close behind another vehicle?

257. Why should you not drive too close behind another vehicle?

It makes your headlights less effective.
✓ You may not have enough time to stop.
It makes your steering less responsive.
It causes the vehicle ahead to use more fuel.

Driving too close, or tailgating, reduces the time and space available to react and increases the risk of a rear-end collision. Use defensive driving and keep a safe following distance.

Vehicle tailgating the traffic ahead
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you be prepared for changing conditions on mountain roads?

258. Why should you be prepared for changing conditions on mountain roads?

✓ Weather, visibility, and road conditions can change quickly.
Mountain roads always have the same weather.
Road signs become less important at higher elevations.
Vehicles automatically lose engine power in the mountains.

Fog, rain, snow, ice, falling rocks, and strong winds can develop rapidly in mountainous areas.

Changing visibility and weather on a mountain road
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What is the best place to cross the road?

259. What is the best place to cross the road?

Between parked vehicles if traffic appears quiet.
At the shortest point, even if visibility is limited.
✓ At a designated crossing.
At a junction without checking for turning traffic.

Use a designated crossing whenever possible. It is usually the safest place to cross the road.

Designated crossing for pedestrians
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What is the main purpose of a motorway emergency lane or hard shoulder?

260. What is the main purpose of a motorway emergency lane or hard shoulder?

For driving when the motorway is busy.
For stopping to check directions.
For allowing faster vehicles to pass.
✓ For emergencies and breakdowns.

A motorway emergency lane or hard shoulder is primarily intended for emergencies and breakdowns, not normal driving. In some places it may be opened temporarily as a traffic lane when signs or signals specifically permit this.

Motorway hard shoulder beside the traffic lanes
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What is the minimum licence for an 8 m minibus designed for 16 passengers plus the driver?

261. What is the minimum licence for an 8 m minibus designed for 16 passengers plus the driver?

✓ Licence D1.
Licence B.
Licence D1E.
Licence C1.

Category D1 covers vehicles designed to carry no more than 16 passengers in addition to the driver and with a maximum length of 8 metres.

Minibus for up to 16 passengers plus the driver
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this dashboard symbol indicate?

262. What does this dashboard symbol indicate?

Parking brake applied.
Door open.
Brake-system warning.
✓ Seat belt not fastened.

This symbol is a seat-belt reminder. It indicates that the driver or another detected occupant has not fastened their seat belt.

Seat-belt reminder symbol on the dashboard
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What may happen if you release the clutch too quickly when moving off?

263. What may happen if you release the clutch too quickly when moving off?

The steering may lock.
The parking brake may engage.
The headlights may switch off.
✓ The engine may stall.

Releasing the clutch pedal too quickly when moving off can cause the engine to stall. Release the clutch smoothly through the biting point while applying the accelerator progressively.

Clutch release and engine stalling when moving off
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
You should check your mirrors before changing lanes.

264. You should check your mirrors before changing lanes.

✓ True.
False.

Checking your mirrors helps you see surrounding traffic before moving into another lane.

Driver checking a mirror before changing lanes
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this dashboard symbol indicate?

265. What does this dashboard symbol indicate?

Rear fog lights.
✓ Hazard warning lights.
Direction indicators.
Brake warning.

This symbol indicates the hazard warning lights. When activated, all direction indicators flash simultaneously to warn other road users of a hazard or unusual situation.

Hazard warning light symbol on the dashboard
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this dashboard symbol indicate?

266. What does this dashboard symbol indicate?

Oil-pressure warning.
✓ Diesel particulate filter warning.
Engine-management warning.
Charging-system warning.

This symbol indicates a problem with the diesel particulate filter (DPF), often because soot has accumulated in the filter. The vehicle may require regeneration or professional inspection, depending on the vehicle and warning status.

Diesel particulate filter warning symbol on the dashboard
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What is the minimum licence for a goods vehicle over 7,500 kg maximum authorised mass?

267. What is the minimum licence for a goods vehicle over 7,500 kg maximum authorised mass?

Licence C1.
Licence C1E.
✓ Licence C.
Licence B.

Category C1 is limited to vehicles with a maximum authorised mass not exceeding 7,500 kg. A goods vehicle above this limit requires category C.

Goods vehicle above 7,500 kg maximum authorised mass
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do before rejoining traffic after a breakdown?

268. What should you do before rejoining traffic after a breakdown?

✓ Check all around, signal, and enter only when there is a safe gap.
Enter the lane slowly so other traffic has time to react.
Pull out as soon as there is enough space for your vehicle.
Signal and expect approaching traffic to slow down.

Check mirrors and blind spots, signal clearly, and build up speed safely without causing approaching traffic to brake suddenly.

Vehicle preparing to rejoin traffic after a breakdown
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this dashboard symbol indicate?

269. What does this dashboard symbol indicate?

Dipped headlights.
✓ Rear fog lights.
Sidelights.
Front fog lights.

This symbol indicates that the rear fog lights are switched on. Rear fog lights make the vehicle more visible from behind in conditions of severely reduced visibility, but they can dazzle other road users when used unnecessarily.

Rear fog-light symbol on the dashboard
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
How can strong crosswinds affect a vehicle towing a trailer?

270. How can strong crosswinds affect a vehicle towing a trailer?

They affect only the towing vehicle, not the trailer.
They improve tyre grip on exposed roads.
They matter only when the trailer is empty.
✓ They can push the trailer sideways and reduce stability.

Trailers have large side surfaces and may be affected strongly by wind, especially on bridges and exposed roads.

Vehicle and trailer exposed to crosswinds
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if your brakes feel less effective after driving through water?

271. What should you do if your brakes feel less effective after driving through water?

Increase speed to warm the brakes.
Ignore it if the vehicle still stops.
Use only the parking brake until they dry.
✓ Drive carefully and test them gently when safe.

Water can reduce braking performance. After driving through water, check the brakes gently when it is safe to do so.

Checking braking response after driving through water
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if a large animal suddenly enters your path?

272. What should you do if a large animal suddenly enters your path?

✓ Brake firmly while keeping control of the vehicle.
Turn suddenly toward the roadside.
Release the steering wheel and brake hard.
Swerve sharply into another lane.

If a large animal enters the road, brake firmly while keeping the vehicle under control. Avoid sudden swerving, as this can cause you to lose control or collide with other traffic.

Large animal entering a vehicle's path
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if your lane is blocked by an obstacle?

273. What should you do if your lane is blocked by an obstacle?

Speed up to keep traffic flowing around the obstacle.
✓ Slow down, check carefully, and give way if needed.
Move around it because the obstacle gives you priority.
Follow another vehicle around it without checking yourself.

If your lane is blocked, reduce speed, check mirrors and oncoming traffic, and only move around the obstacle when it is safe.

Obstacle blocking a vehicle's lane
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if a vehicle is reversing near you?

274. What should you do if a vehicle is reversing near you?

Stand close behind it so the driver can see you.
Cross behind it once the driver looks forward.
Rely on the reversing sensors to make it stop.
✓ Stay clear and make sure the driver can see you.

Reversing vehicles have blind spots. Stay away from the vehicle and make sure the driver can see you.

Pedestrian near a reversing vehicle
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What licence is needed for a B vehicle towing a trailer up to 3,500 kg above 4,250 kg combined MAM?

275. What licence is needed for a B vehicle towing a trailer up to 3,500 kg above 4,250 kg combined MAM?

Licence C1E.
Licence B with Code 96.
✓ Licence BE.
Licence C1.

Category BE covers a category B towing vehicle with a trailer or semi-trailer having a maximum authorised mass of up to 3,500 kg. Category B with Code 96 is limited to combinations with a maximum authorised mass of up to 4,250 kg.

Car and trailer combination for category BE
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you check before starting a motorcycle journey?

276. What should you check before starting a motorcycle journey?

✓ Tyres, brakes, lights, steering, and controls.
Only the brakes and lights.
Nothing if the motorcycle was recently serviced.
Only the fuel level and mirrors.

Before riding, carry out a basic safety check. Check the tyres, brakes, lights, steering and controls, and inspect the drive chain, belt or other drive components where applicable. Finding a problem before setting off can prevent a breakdown or loss of control.

Checking a motorcycle before a journey
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should a motorcyclist avoid riding in another vehicle's blind spot?

277. Why should a motorcyclist avoid riding in another vehicle's blind spot?

The motorcycle will use more fuel.
✓ The driver may not be able to see the motorcycle.
The vehicle ahead must always change lanes.
The motorcycle's brakes may become less effective.

Motorcycles can be difficult to see, particularly when they remain in another vehicle's blind spot. Avoid staying alongside a vehicle where the driver may not see you, and choose a position where you are more likely to be visible.

Motorcycle in another vehicle's blind spot
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do before crossing the road?

278. What should you do before crossing the road?

Listen for vehicles instead of looking.
Cross if the nearest vehicle is slowing down.
Follow another pedestrian without checking yourself.
✓ Look for traffic in all directions.

Always check for approaching traffic from every direction before crossing.

Pedestrian checking for traffic before crossing
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Where should you normally wait after a breakdown on a high-speed road?

279. Where should you normally wait after a breakdown on a high-speed road?

Between the vehicle and the safety barrier.
In front of the vehicle while facing approaching traffic.
Immediately behind the vehicle so you remain visible.
✓ Behind a safety barrier and well away from the vehicle and traffic.

A stationary vehicle can be struck by passing traffic. Waiting behind a barrier provides better protection.

People waiting behind a safety barrier after a breakdown
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you leave a much larger following distance on an icy road?

280. Why should you leave a much larger following distance on an icy road?

✓ Because stopping distances can be much longer.
To prevent ice from forming on the windscreen.
Because ice increases tyre wear.
To give the engine more time to warm up.

Tyres have much less grip on ice, so braking takes longer. Extra distance gives you more time to slow down safely.

Following distance between vehicles on an icy road
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do when a traffic light turns red?

281. What should you do when a traffic light turns red?

Continue if the junction appears clear.
Follow the vehicle ahead through the junction.
✓ Stop and wait until you may proceed.
Stop only if other traffic is approaching.

A red traffic light means you must stop before the stop line, pedestrian crossing, or intersection unless a sign or signal indicates otherwise.

Red traffic light at a junction
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if strong winds push your vehicle sideways?

282. What should you do if strong winds push your vehicle sideways?

✓ Keep calm and steer smoothly to maintain your lane.
Release the steering wheel briefly and let the vehicle settle.
Accelerate to make the vehicle more stable.
Brake hard immediately to stop the vehicle moving sideways.

Strong winds can push your vehicle off course, especially at higher speeds. Reduce speed and use smooth steering to stay in control.

Crosswind affecting a vehicle's road position
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do when approaching a narrow road with oncoming traffic?

283. What should you do when approaching a narrow road with oncoming traffic?

Move closer to the road edge without reducing speed.
Continue first if you entered the narrow section earlier.
Expect the oncoming driver to make room for you.
✓ Slow down and give space when needed.

On narrow roads, reduce speed and be prepared to stop or use a suitable passing place. Leave enough space for the oncoming vehicle and avoid forcing either vehicle into an unsafe position.

Oncoming vehicles approaching a narrow stretch of road
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
You should follow the vehicle in front as closely as possible in traffic.

284. You should follow the vehicle in front as closely as possible in traffic.

✓ False.
True.

You should keep a safe following distance so you have enough time to react if traffic slows or stops suddenly.

Vehicle following closely behind another vehicle
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do when traffic is merging from another lane?

285. What should you do when traffic is merging from another lane?

Speed up slightly so they can merge behind you.
✓ Adjust your speed and leave space when safe.
Maintain your speed and expect them to merge behind you.
Move closer to the vehicle ahead to keep your lane clear.

When traffic merges, good observation and speed control help vehicles join safely without sudden braking or conflict.

Vehicle merging from an adjacent lane
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you avoid changing lanes inside an intersection?

286. Why should you avoid changing lanes inside an intersection?

It can make it harder to maintain a steady speed.
It can make your route through the junction longer.
✓ It can confuse other road users and increase collision risk.
It can make road markings harder to follow.

Changing lanes inside an intersection can surprise drivers, cyclists, and pedestrians. It is safer to choose the correct lane before entering.

Vehicle changing lanes within a junction
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you leave extra space when passing cyclists in strong winds?

287. Why should you leave extra space when passing cyclists in strong winds?

Wind increases the pressure in bicycle tyres.
Cyclists always ride more slowly in strong winds.
Cyclists must stop when a vehicle passes them.
✓ They may be blown sideways unexpectedly.

Strong gusts can affect cyclists' balance and direction. Extra passing space reduces the risk of a collision.

Vehicle passing a cyclist in windy conditions
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What word is commonly shown on STOP signs in Sweden?

288. What word is commonly shown on STOP signs in Sweden?

PARE.
DUR.
✓ STOP.
ALTO.

In Sweden, STOP signs commonly display the word STOP.

Different wording used on stop signs
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you leave space beside large vehicles when they turn?

289. Why should you leave space beside large vehicles when they turn?

✓ They may need extra room to complete the turn.
They always turn more slowly than cars.
They can turn only from the centre of the road.
They must stop before making every turn.

Large vehicles often swing wide when turning and have larger blind spots. Keep clear and do not move into the space beside them.

Large vehicle needing extra space to turn
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What is the clutch biting point?

290. What is the clutch biting point?

The point where the clutch pedal is fully pressed.
The point where the engine switches off.
The point where the parking brake releases.
✓ The point where the clutch begins to transmit power to the wheels.

The clutch biting point is reached as the clutch pedal is released and the clutch begins to transmit power from the engine to the transmission. Controlling this point helps the driver move off smoothly.

Clutch-pedal control when moving off
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should a motorcyclist do before entering a bend?

291. What should a motorcyclist do before entering a bend?

✓ Reduce speed before the bend and look through it.
Brake hard after beginning to lean.
Accelerate before checking how sharp the bend is.
Move close to the centre of the road.

Adjust your speed before entering the bend so you can steer smoothly and remain within a safe position. Look through the bend towards where you want to travel and be prepared for hazards that may be hidden from view.

Motorcyclist approaching a bend
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Which vehicles are covered by driving licence C1?

292. Which vehicles are covered by driving licence C1?

Goods vehicles over 7,500 kg only.
Buses carrying more than eight passengers.
✓ Non-bus vehicles over 3,500 kg and up to 7,500 kg.
Vehicles up to 3,500 kg only.

Category C1 covers motor vehicles, other than buses, with a maximum authorised mass above 3,500 kg and not exceeding 7,500 kg. They may carry no more than eight passengers in addition to the driver and may tow a trailer up to 750 kg.

Goods vehicle covered by category C1
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Does driving at the speed limit always mean your speed is safe?

293. Does driving at the speed limit always mean your speed is safe?

Yes, if the road ahead appears clear.
Yes, if your vehicle is in good condition.
Only when driving outside built-up areas.
✓ No, you may need to drive more slowly for the conditions.

A speed limit is a maximum permitted speed, not a target. You may need to drive more slowly because of traffic, poor visibility, weather, road conditions, pedestrians, cyclists, or other hazards.

Speed-limit sign and changing road conditions
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why can headphones or very loud music be dangerous while driving?

294. Why can headphones or very loud music be dangerous while driving?

They can prevent the horn from working properly.
They can make the mirrors more difficult to adjust.
They can cause the speed limiter to switch off.
✓ They can make important warning sounds harder to hear.

Headphones or very loud music can reduce your awareness of horns, sirens, warning sounds, and surrounding traffic. Keep the volume at a level that allows you to remain aware of what is happening around the vehicle.

Driver wearing headphones at the wheel
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this dashboard symbol indicate?

295. What does this dashboard symbol indicate?

Adaptive cruise control.
Electronic stability control.
✓ Parking assistance.
Automatic emergency braking.

This symbol relates to the vehicle's parking assistance system. Depending on the vehicle, the system may use sensors or cameras to detect obstacles and assist the driver while parking.

Parking-assistance symbol on the dashboard
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you make sure drivers have seen you before crossing?

296. Why should you make sure drivers have seen you before crossing?

Once a driver sees you, no further checks are needed.
Eye contact means the driver must stop for you.
✓ To reduce the risk of stepping into their path.
Making eye contact gives you priority.

Before crossing, make sure approaching drivers have noticed you and that it is safe to proceed. Do not assume that a driver will stop simply because you have seen each other.

Pedestrian checking whether an approaching driver has seen them
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do before making a turn?

297. What should you do before making a turn?

Signal only after you begin turning.
Check only the traffic directly ahead.
Rely on other road users to slow down for you.
✓ Check mirrors, signal, and make sure it is safe.

Before turning, check your mirrors, use your indicator, and make sure the turn can be made safely.

Driver preparing to turn at a junction
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Where should passengers wait after safely leaving a broken-down vehicle?

298. Where should passengers wait after safely leaving a broken-down vehicle?

✓ In a protected place well away from moving traffic.
Wait in the traffic lane until help arrives.
Wait close beside the vehicle where drivers can see you.
Stand between the vehicle and the safety barrier.

Move passengers, children, and pets away from the carriageway. On high-speed roads, wait behind a safety barrier where possible.

Passengers moving away from a broken-down vehicle
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does a green traffic light mean?

299. What does a green traffic light mean?

You have priority over all other road users.
You may enter even if traffic is blocking the junction.
You may turn in any direction without checking the signs.
✓ You may proceed if it is safe.

A green light allows you to continue, but you must still watch for pedestrians, cyclists, and other road users.

Green traffic light at a junction
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you check before starting a manual vehicle?

300. What should you check before starting a manual vehicle?

That the parking brake is released.
✓ That the gearbox is in neutral and the clutch is pressed.
That reverse gear is selected.
That first gear is selected and the accelerator is pressed.

Before starting a manual vehicle, make sure the gearbox is in neutral and press the clutch pedal. This helps prevent the vehicle from moving unexpectedly when the engine starts.

Clutch and gear checks before starting a manual vehicle
AI-generated by Traffic-rules.com • WCIT • CC BY-SA