Support us

QuizTraffic rulesSlovakia

This interesting quiz helps you test your knowledge in a clear and visual way. With easy multiple-choice questions, you can quickly build confidence and learn new facts while keeping it simple, interactive, and fun.

Traffic signs
Traffic rules
Slovakia
True/false 17 Slovakia 31 Car controls 109 Dashboard lights 40 Priority rules 9 Pedestrians 19 Cyclists 20 Driving licence 40 Show all 638
What should you normally do with the accelerator when changing to a higher gear?

401. What should you normally do with the accelerator when changing to a higher gear?

✓ Ease off it while pressing the clutch.
Press the brake pedal instead.
Press it fully while pressing the clutch.
Keep it pressed at the same position.

When changing to a higher gear, ease off the accelerator as you press the clutch and select the next gear. Release the clutch smoothly and then apply the accelerator progressively.

Changing to a higher gear in a manual vehicle
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this dashboard symbol indicate?

402. What does this dashboard symbol indicate?

Brake-system warning.
✓ Airbag system warning.
Power-steering warning.
Seat-belt reminder.

This symbol indicates a possible fault in the airbag or supplementary restraint system. If it remains illuminated while driving, the system should be checked because one or more airbags or seat-belt pretensioners may not operate correctly in a collision.

Airbag-system warning symbol on the dashboard
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you keep a safe following distance?

403. Why should you keep a safe following distance?

✓ To have enough time to stop.
To make your vehicle easier to see ahead.
To reduce wear on the brakes.
To make overtaking easier.

A safe following distance gives you enough time to react if the vehicle in front slows down or stops suddenly.

Gap between a vehicle and the traffic ahead
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if a tyre-pressure warning appears and handling changes?

404. What should you do if a tyre-pressure warning appears and handling changes?

Accelerate slightly to warm the tyre.
Continue until the warning light goes out by itself.
✓ Reduce speed and stop safely to check the tyres.
Release air from the other tyres to balance the pressure.

A pressure loss or damaged tyre can affect steering and braking. If the tyre-pressure warning appears together with a change in handling, it may indicate a serious tyre problem. Stop safely and inspect the tyres before continuing.

Tyre-pressure warning and a tyre inspection
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if a tyre has a deep cut, bulge, or exposed cords?

405. What should you do if a tyre has a deep cut, bulge, or exposed cords?

Cover the damaged area and keep using the tyre.
Increase the tyre pressure and continue driving.
✓ Stop using the tyre and arrange professional inspection or replacement.
Move the damaged tyre to another wheel position.

Cuts, bulges, and exposed cords can indicate serious structural damage. The tyre may fail suddenly and should not be used normally.

Damaged vehicle tyre requiring inspection
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Are headlights required during the day in Slovakia?

406. Are headlights required during the day in Slovakia?

✓ Yes.
No.

Drivers in Slovakia are generally required to use daytime running lights or dipped headlights during the day.

Vehicle headlights used during daylight
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you avoid keeping the clutch pedal pressed while driving?

407. Why should you avoid keeping the clutch pedal pressed while driving?

✓ It reduces engine braking and vehicle control.
It applies the parking brake.
It increases tyre pressure.
It locks the steering.

Keeping the clutch pedal pressed while the vehicle is moving disconnects the engine from the transmission. This reduces engine braking and can reduce your control of the vehicle.

Clutch held down while a vehicle is moving
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Using indicators helps other road users understand your intentions.

408. Using indicators helps other road users understand your intentions.

✓ True.
False.

Indicators help communicate your intended direction and improve safety for everyone on the road.

Vehicle signalling its intended direction
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
When should a passenger get on or off a motorcycle?

409. When should a passenger get on or off a motorcycle?

Whenever the passenger feels ready.
As soon as the engine has been started.
Before the rider has balanced the motorcycle.
✓ When the motorcycle is stationary and the rider is ready.

A passenger getting on or off can shift the motorcycle's balance suddenly. The motorcycle should be stationary and stable, and the passenger should wait until the rider is ready and prepared to support the extra movement.

Passenger getting onto a stationary motorcycle
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What is important when raising a vehicle with its jack?

410. What is important when raising a vehicle with its jack?

✓ Use the correct jacking point and never go underneath a vehicle on a jack.
Work underneath if the jack appears stable.
Use any solid-looking part underneath the vehicle.
Raise the vehicle before applying the parking brake.

A jack can slip or fail if it is incorrectly positioned. Secure the vehicle and use additional approved supports before working underneath it.

Vehicle raised at a jacking point for a wheel change
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you check blind spots before moving off?

411. Why should you check blind spots before moving off?

To judge the speed of traffic approaching from behind.
✓ A cyclist, pedestrian, or vehicle may be beside you.
To make sure your mirrors are adjusted correctly.
To confirm other drivers have seen your indicator.

Mirrors do not show every area around your vehicle. A blind-spot check can reveal cyclists, pedestrians, motorcyclists, or vehicles before you move off.

Driver checking a blind spot before moving off
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do with the parking brake before leaving a parked vehicle?

412. What should you do with the parking brake before leaving a parked vehicle?

Apply it only on a slope.
Leave it partly applied.
✓ Apply it securely.
Release it completely.

Before leaving a parked vehicle, apply the parking brake securely to help prevent unintended movement. Also select the appropriate gear or transmission position for parking.

Securing a parked vehicle with the parking brake
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do when driving through heavy rain?

413. What should you do when driving through heavy rain?

Use main beam to improve visibility.
Drive closer to the vehicle ahead for guidance.
✓ Reduce speed and increase your following distance.
Accelerate through the rain to clear it more quickly.

Heavy rain reduces grip and visibility. Lower speed and extra distance give you more time to react safely.

Vehicle travelling through heavy rain
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do when approaching an uncontrolled junction?

414. What should you do when approaching an uncontrolled junction?

Continue at normal speed unless another vehicle is visible.
Check only the direction from which traffic usually has priority.
✓ Slow down, look carefully in all directions, and proceed only when safe.
Enter first if you reach the junction before another vehicle.

At an uncontrolled junction, priority may not be obvious. Reduce speed, check carefully, and only enter when you are sure it is safe.

Vehicle approaching an uncontrolled junction
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Who normally has priority when you enter a motorway from an entry lane?

415. Who normally has priority when you enter a motorway from an entry lane?

✓ Traffic already travelling on the motorway.
Whichever vehicle reaches the merge point first.
Traffic entering from the entry lane.
The vehicle closest to the end of the entry lane.

You must adjust your speed and find a safe gap without forcing motorway traffic to brake or change direction.

Vehicle entering beside traffic already on a motorway
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do when passing a horse rider?

416. What should you do when passing a horse rider?

Flash your headlights before moving alongside.
Pass closely to reduce the time beside the horse.
Accelerate while passing to get past quickly.
✓ Slow down and give plenty of space.

Horses can be startled by noise or sudden movement. Slow down, pass carefully, and leave enough space.

Vehicle passing a horse and rider
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does the ACC position of a traditional ignition switch normally allow?

417. What does the ACC position of a traditional ignition switch normally allow?

The starter motor to turn the engine.
The transmission to select Drive.
The parking brake to release.
✓ Electrical accessories to be used without starting the engine.

The ACC (accessory) position normally supplies power to certain electrical accessories, such as the audio system, without starting the engine. The exact functions available can vary between vehicles.

ACC accessory position on an ignition switch
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this dashboard symbol indicate?

418. What does this dashboard symbol indicate?

✓ Brake-pad wear warning.
Low tyre pressure.
Brake-system fault.
Parking brake applied.

This symbol indicates that the brake pads may be worn and should be inspected. Continuing to drive with excessively worn brake pads can reduce braking performance and damage other brake components.

Brake-pad wear warning symbol on the dashboard
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Which vehicles are normally covered by driving licence B?

419. Which vehicles are normally covered by driving licence B?

Goods vehicles up to 7,500 kg.
✓ Cars and light vehicles up to 3,500 kg.
Heavy goods vehicles of any mass.
Any vehicle towing a heavy trailer.

Category B normally covers motor vehicles with a maximum authorised mass of no more than 3,500 kg and designed to carry no more than eight passengers in addition to the driver. Trailer rules depend on the trailer and combined authorised mass.

Car covered by category B
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What is the general speed limit for cars on ordinary roads outside built-up areas in Slovakia?

420. What is the general speed limit for cars on ordinary roads outside built-up areas in Slovakia?

80 km/h.
100 km/h.
Other speed limit.
✓ 90 km/h.

In Slovakia, the general speed limit for cars on ordinary roads outside built-up areas is 90 km/h, unless signs indicate otherwise.

Speed limits for cars outside built-up areas
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do when livestock are on the road?

421. What should you do when livestock are on the road?

Use the verge to pass the animals.
Follow closely so other traffic can overtake.
Sound the horn so the animals move aside.
✓ Slow down and follow the instructions of the person controlling them.

Livestock may spread across the road, stop suddenly, or change direction without warning. Slow down, keep a safe distance, avoid sudden movements or loud noises, and follow any instructions from the person controlling the animals.

Livestock being moved along a road
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
How should you approach a sharp bend on a mountain road?

422. How should you approach a sharp bend on a mountain road?

Overtake just before entering the bend.
✓ Reduce speed before the bend and remain in your lane.
Accelerate through the bend to maintain momentum.
Brake hard while turning through the bend.

Mountain bends may hide oncoming vehicles, cyclists, animals, or debris. Slow down before entering and keep a safe road position.

Sharp bend on a mountain road
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What is the minimum age for riding a moped in Slovakia?

423. What is the minimum age for riding a moped in Slovakia?

16 years.
✓ 15 years.
14 years.
18 years.

The minimum age for riding a moped in Slovakia is generally 15 years.

Minimum age for riding a moped
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do before driving with a load?

424. What should you do before driving with a load?

Place heavy items on top of lighter items.
✓ Make sure it is properly secured and cannot move or fall.
Secure only the heaviest items.
Check the load only after you have started driving.

An unsecured load can shift, affect vehicle control, or fall into the road. Check that everything is safely restrained before moving.

Checking a vehicle's load before setting off
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do when crossing a road with no marked crossing nearby?

425. What should you do when crossing a road with no marked crossing nearby?

Cross between parked vehicles if traffic seems quiet.
Cross near a bend if approaching traffic seems slow.
Cross diagonally to spend less time in each lane.
✓ Choose a place with a clear view in both directions.

If there is no marked crossing nearby, choose a safe place where you can clearly see approaching traffic.

Pedestrian preparing to cross a road without a marked crossing
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why can mixing alcohol with medicine be dangerous for drivers?

426. Why can mixing alcohol with medicine be dangerous for drivers?

Medicine prevents alcohol from causing drowsiness.
The combination is safe if taken with food.
✓ The combination may increase drowsiness or impairment.
Medicine can cancel out the effects of alcohol.

Some prescription and non-prescription medicines can intensify alcohol-related drowsiness, dizziness, poor coordination, or reduced concentration.

Alcohol and medicine as a driving-impairment risk
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why must a roof load be securely attached?

427. Why must a roof load be securely attached?

To stop the roof rack from increasing fuel consumption.
Because the roof will hold the load in place while driving.
✓ It could shift or fall and create a serious hazard.
Because light roof loads cannot be affected by the wind.

A roof load is exposed to strong airflow and movement. It must be restrained correctly and kept within the permitted limits.

Load secured to a vehicle's roof
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if your headlights fail while driving at night?

428. What should you do if your headlights fail while driving at night?

Continue slowly if the road is well lit.
Stop immediately in the traffic lane.
✓ Reduce speed and stop safely using any remaining lights or hazard lights.
Follow another vehicle closely for visibility.

Without effective headlights, you may not see hazards and other road users may not see you. Stop in a safe location as soon as possible.

Vehicle with failed headlights at night
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if a seat belt is frayed or damaged?

429. What should you do if a seat belt is frayed or damaged?

Twist the damaged section so it cannot tear further.
Wear the belt loosely to reduce strain on it.
✓ Have it inspected and replaced before relying on it.
Use it normally if the buckle still locks.

A damaged seat belt may not provide proper protection in a collision. Frayed webbing, damaged buckles, faulty retractors, or other defects should be professionally inspected and repaired or replaced before the seat belt is relied upon.

Frayed or damaged seat-belt webbing
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Which vehicles are covered by driving licence C?

430. Which vehicles are covered by driving licence C?

Buses carrying more than eight passengers.
✓ Heavy vehicles over 3,500 kg, excluding buses.
Heavy vehicles only when towing a trailer.
Vehicles only between 3,500 and 7,500 kg.

Category C covers motor vehicles, other than categories D1 and D, with a maximum authorised mass above 3,500 kg and designed to carry no more than eight passengers in addition to the driver. A trailer up to 750 kg may be towed.

Heavy goods vehicle covered by category C
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this vehicle-control symbol indicate?

431. What does this vehicle-control symbol indicate?

Front windscreen demister.
Rear window demister.
Fresh-air ventilation.
✓ Air recirculation.

This symbol activates air recirculation, which reduces the amount of outside air entering the vehicle and recirculates air already inside the cabin. It can be useful when driving through polluted air or when cooling the interior quickly.

Cabin air-recirculation control and symbol
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Which vehicles are especially vulnerable to strong crosswinds?

432. Which vehicles are especially vulnerable to strong crosswinds?

Low, heavily loaded vehicles.
✓ High-sided vehicles such as trucks, buses, and vans.
Vehicles with full fuel tanks.
Electric vehicles.

High-sided vehicles can be pushed sideways because of their large side area. Cyclists and motorcyclists can also be strongly affected by sudden gusts.

High-sided vehicle exposed to crosswinds
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if your motorcycle helmet visor starts to fog?

433. What should you do if your motorcycle helmet visor starts to fog?

✓ Reduce speed and clear the visor safely.
Wipe the inside of the visor while riding.
Look around the side of the visor instead.
Keep riding at the same speed until it clears.

A fogged visor can seriously reduce your view of the road. Reduce speed and use the helmet's ventilation, demisting or anti-fog features where available. If you cannot restore a clear view safely, stop in a safe place before continuing.

Misted visor on a motorcycle helmet
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you avoid driving too close to the edge of the road?

434. Why should you avoid driving too close to the edge of the road?

✓ The edge may be uneven or weak.
It can make your speed harder to judge.
It can make the steering require more effort.
It can reduce the effectiveness of your mirrors.

Road edges can be soft, uneven, or damaged. Driving too close to the edge can reduce control or cause the vehicle to leave the road.

Vehicle travelling close to the road edge
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do when approaching a temporary lane closure?

435. What should you do when approaching a temporary lane closure?

✓ Follow the temporary signs and merge safely when required.
Ignore the temporary signs if your lane is still open.
Follow construction vehicles through the closed lane.
Merge without checking if traffic is moving slowly.

Observe the temporary signs, adjust your speed, and merge safely according to the traffic situation and local rules.

Temporary traffic-lane closure ahead
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do before driving away after charging an electric vehicle?

436. What should you do before driving away after charging an electric vehicle?

Leave the charging flap open so it can cool.
Place the cable loosely beside the charging bay.
Drive forward slowly to disconnect the plug.
✓ Disconnect the charging cable and secure it properly.

Before driving away, disconnect the charging cable correctly and return it to the charger or store it securely in the vehicle, as appropriate. Close the charging port and check that the area around the vehicle is clear.

Disconnecting an electric vehicle after charging
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should hard braking be avoided while a motorcycle is leaning in a bend?

437. Why should hard braking be avoided while a motorcycle is leaning in a bend?

✓ It can reduce stability and available tyre grip.
It can make the engine overheat.
It makes the motorcycle turn more sharply.
It increases tyre pressure immediately.

When a motorcycle is leaning, the tyres are already using grip to turn. Hard braking can demand additional grip and may reduce stability. Whenever possible, adjust speed before the bend and use smooth, controlled inputs while cornering.

Motorcycle leaning while travelling through a bend
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do when reversing with a trailer?

438. What should you do when reversing with a trailer?

Make large steering corrections as soon as it turns.
Watch only the trailer and ignore surrounding traffic.
✓ Reverse slowly and make small steering corrections.
Reverse quickly to keep the trailer straight.

Trailers react quickly to steering while reversing. Move slowly, observe carefully, and use a guide only from a safe visible position.

Vehicle reversing with a trailer
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do when traffic lights are not working?

439. What should you do when traffic lights are not working?

Proceed if the junction appears clear.
Follow the vehicle ahead through the junction.
✓ Proceed carefully and follow signs or priority rules.
Wait for another driver to enter first, then follow.

If traffic lights are not working, slow down, observe carefully, and follow signs, road markings, or local priority rules.

Junction with traffic lights out of operation
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What is the purpose of heated door mirrors?

440. What is the purpose of heated door mirrors?

To adjust the mirror angle.
To improve the headlights.
✓ To clear mist or ice from the mirror glass.
To fold the mirrors automatically.

Heated door mirrors warm the mirror glass to help clear mist, condensation, or light ice and improve rearward visibility. On some vehicles, they operate together with the rear-window demister.

Heated door-mirror control and demisting function
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Which vehicle type is mainly associated with driving licence C?

441. Which vehicle type is mainly associated with driving licence C?

Moped.
Bus.
✓ Truck.
Motorcycle.

Driving licence C is mainly associated with trucks. Category C1 covers smaller heavy vehicles, C covers larger heavy vehicles, and C1E and CE allow heavier trailers.

Driving licence card for category C
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you avoid following another vehicle too closely in fog?

442. Why should you avoid following another vehicle too closely in fog?

To increase stopping distance.
To keep the windscreen clearer.
✓ You may have too little time to react if it brakes suddenly.
To reduce fuel consumption in poor visibility.

Following too closely reduces your reaction time and can lead to a collision if the vehicle ahead slows unexpectedly.

Following another vehicle in fog
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do when an automatic vehicle is stationary in D?

443. What should you do when an automatic vehicle is stationary in D?

✓ Keep the brake pedal pressed.
Press the accelerator lightly.
Release the parking brake.
Select reverse gear.

An automatic vehicle may creep forward when D (Drive) is selected, even without pressing the accelerator. Keep the brake pedal pressed while stationary to prevent unintended movement.

Automatic gear selector in Drive and brake-pedal control
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Which motorcycles are covered by driving licence A?

444. Which motorcycles are covered by driving licence A?

Motorcycles with sidecars only.
Motorcycles up to 125 cm³ only.
Mopeds up to 45 km/h only.
✓ Motorcycles without the A1 or A2 power limits.

Category A covers motorcycles without the power restrictions that apply to categories A1 and A2. It also covers powered tricycles with power exceeding 15 kW.

Motorcycle covered by unrestricted category A
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Which gear is normally used when moving off from a standstill?

445. Which gear is normally used when moving off from a standstill?

2nd gear.
Neutral.
Reverse.
✓ 1st gear.

1st gear is normally used when moving off from a standstill because it provides the greatest pulling power at low speed.

Manual gear lever and gear-selection pattern
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if traffic beyond a railway crossing is blocked?

446. What should you do if traffic beyond a railway crossing is blocked?

✓ Wait until there is enough space to clear the tracks completely.
Stop on the tracks if no train is visible.
Cross quickly before the warning signals activate.
Enter the crossing and wait for traffic to move.

Never enter a railway crossing unless you can clear the tracks completely. If traffic ahead is blocked, wait before the crossing so you cannot become trapped on the railway.

Congested traffic beyond a railway crossing
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Can drivers use a handheld phone while driving in Slovakia?

447. Can drivers use a handheld phone while driving in Slovakia?

✓ No.
Yes.

Drivers in Slovakia are generally not allowed to use a handheld phone while driving.

Driver using a handheld phone
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you obey traffic signs?

448. Why should you obey traffic signs?

✓ To improve safety for everyone.
To let you drive at the maximum permitted speed.
To make other drivers responsible for your safety.
To make sure you always have priority.

Traffic signs help organise traffic and improve safety for drivers, cyclists, and pedestrians.

Traffic signs using Vienna-style designs
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if the power steering suddenly stops assisting you?

449. What should you do if the power steering suddenly stops assisting you?

✓ Hold the wheel firmly, use greater steering effort, and stop safely.
Switch off the engine while moving to reset the system.
Keep driving normally if the vehicle still turns.
Accelerate to make the steering easier.

The vehicle can normally still be steered, but much more effort may be required. Reduce speed and arrange an inspection.

Driver coping with a loss of power-steering assistance
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do when approaching a curve with poor visibility?

450. What should you do when approaching a curve with poor visibility?

Move slightly toward the centre for a better view.
Follow the vehicle ahead closely through the curve.
✓ Slow down and stay in your lane.
Brake only after entering the curve if necessary.

A curve can hide oncoming traffic, obstacles, cyclists, or pedestrians. Reduce speed and keep a safe position.

Road bend with a restricted view ahead
AI-generated by Traffic-rules.com • WCIT • CC BY-SA