QuizTraffic rulesUnited States

Test your knowledge with our multiple-choice quiz. Learn from each answer and improve your understanding of the traffic rules and road signs of United States.

For informational purposes only. Always follow official regulations. Some content and images were created with AI assistance.


What should you do if your vehicle breaks down inside a road tunnel?

501. What should you do if your vehicle breaks down inside a road tunnel?

Back up toward the tunnel entrance if traffic is light.
✓ Move aside if possible, use hazard lights, and call for assistance.
Make a U-turn and drive toward the nearest exit.
Stay in the traffic lane and wait without using hazard lights.

If possible, stop in an emergency bay or another safe place and use the hazard lights. Contact tunnel control using an emergency telephone or other available assistance system, and follow the tunnel signs and instructions.

Broken-down vehicle inside a road tunnel
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this vehicle-control symbol indicate?

502. What does this vehicle-control symbol indicate?

Lumbar support.
Mirror adjustment.
Steering-wheel adjustment.
✓ Seat adjustment.

This control adjusts the position of the seat. Depending on the vehicle, it may move the seat forward or backward, raise or lower it, or change the backrest angle.

Control for adjusting the driver's seat
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you keep a safe following distance?

503. Why should you keep a safe following distance?

✓ To have enough time to stop.
To make your vehicle easier to see ahead.
To make passing easier.
To keep traffic moving at a steady speed.

A safe following distance gives you enough time to react if the vehicle in front slows down or stops suddenly.

Gap between a vehicle and the traffic ahead
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What is the main emergency number in United States?

504. What is the main emergency number in United States?

✓ 911.
111.
123.
112.

The main emergency number in United States is 911.

911 emergency telephone number
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What can slow engine cranking or dim lights indicate?

505. What can slow engine cranking or dim lights indicate?

Incorrect tire pressure.
A blocked air filter.
Worn brake pads.
✓ A weak battery or charging-system problem.

Slow starting, dim lights, or repeated battery warnings can indicate a weak battery, poor electrical connection, or a fault in the charging system.

Vehicle battery and difficulty starting the engine
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you avoid driving through deep water?

506. Why should you avoid driving through deep water?

Water causes the tires to lose air pressure.
Deep water makes the engine use too much oil.
Increase speed to maintain full control through the water.
✓ It can damage your vehicle or make you lose control.

Deep water can damage the engine, reduce braking ability, hide hazards, or cause the vehicle to lose grip. Reduce speed, assess the depth and conditions carefully, and avoid entering the water if you are unsure it is safe. If necessary, stop and use another route.

Deep water covering part of a road
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you avoid stopping in a blind spot of a large vehicle?

507. Why should you avoid stopping in a blind spot of a large vehicle?

Large vehicles always have the right-of-way when changing lanes.
✓ The driver may not be able to see you.
Stopping beside a large vehicle makes you easier to see.
Blind spots only matter when a vehicle is backing up.

Large vehicles have bigger blind spots. If you stop where the driver cannot see you, you may be at risk when the vehicle moves or turns.

Vehicle positioned in a large vehicle's blind spot
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Which control is normally used to switch between low- and high-beam headlights?

508. Which control is normally used to switch between low- and high-beam headlights?

✓ The lighting lever.
The hazard warning switch.
The dashboard brightness control.
The windshield-wiper lever.

The lighting lever is normally used to switch between low- and high-beam headlights. The exact movement varies between vehicles, so check the vehicle controls before driving.

Lighting lever for switching between low- and high-beam headlights
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this vehicle-control symbol indicate?

509. What does this vehicle-control symbol indicate?

Front fog lights.
Headlight level adjustment.
✓ Instrument-panel brightness.
Interior lighting.

This control adjusts the brightness of the instrument panel and dashboard illumination, allowing the driver to reduce or increase the lighting level.

Control for adjusting instrument-panel brightness
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do before refueling a gasoline or diesel vehicle?

510. What should you do before refueling a gasoline or diesel vehicle?

Keep the engine idling if the vehicle is outside.
Switch on the hazard lights while refueling.
Increase the engine speed before removing the fuel cap.
✓ Switch off the engine before starting to refuel.

Switch off the engine before refueling. Fuel vapors are flammable, so avoid ignition sources and follow the safety instructions at the gas station. If fuel is spilled, do not start the vehicle until the situation has been made safe.

Vehicle at a pump before refueling
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this vehicle-control symbol indicate?

511. What does this vehicle-control symbol indicate?

✓ Windshield washer.
Rear window defroster.
Windshield wiper speed.
Front windshield defroster.

This symbol indicates the windshield washer. Operating the control sprays washer fluid onto the windshield and normally activates the wipers to help clean the glass.

Windshield-washer control and spray symbol
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if someone is injured in a road collision?

512. What should you do if someone is injured in a road collision?

Give them food or drink while waiting for help.
Move them to a more comfortable position immediately.
Remove a motorcyclist's helmet to check for injuries.
✓ Call for help and avoid moving them unless there is immediate danger.

Moving an injured person can worsen spinal or other injuries. Keep them calm, protect them from further danger, and provide first aid only within your level of training.

Assistance for an injured person after a road collision
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this dashboard symbol indicate?

513. What does this dashboard symbol indicate?

Lane-departure warning.
✓ Parking assistance.
Automatic emergency braking.
Adaptive cruise control.

This symbol relates to the vehicle's parking assistance system. Depending on the vehicle, the system may use sensors or cameras to detect obstacles and assist the driver while parking.

Parking-assistance symbol on the dashboard
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What can happen if you use the brakes continuously on a long descent?

514. What can happen if you use the brakes continuously on a long descent?

The engine may automatically slow the vehicle.
The brakes will automatically cool while being used.
✓ The brakes may overheat and become less effective.
The brakes may become more effective as they heat up.

Continuous braking can cause the brakes to overheat and fade, reducing braking performance. Use a lower gear to help control speed with engine braking.

Vehicle braking during a long descent
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do when temporary traffic lights show red?

515. What should you do when temporary traffic lights show red?

Proceed if no road workers are visible.
Only permanent traffic lights are valid.
✓ Stop before the signal or temporary stop line.
Continue if the road ahead appears clear.

Temporary traffic signals must be obeyed like permanent signals. Stop and wait until you are permitted to continue.

Red signal on temporary road work traffic lights
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
How should a passenger normally sit on a motorcycle?

516. How should a passenger normally sit on a motorcycle?

As far back as possible without using the footrests.
Standing on the footrests when the road is uneven.
Sideways so they can get off more easily.
✓ Securely on the passenger seat with both feet on the footrests.

A motorcycle passenger should sit securely on the designated passenger seat, keep both feet on the footrests and avoid sudden movements that could affect the motorcycle's balance and stability.

Passenger seated on a motorcycle with feet on the footrests
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if you are unsure who has the right-of-way at an intersection?

517. What should you do if you are unsure who has the right-of-way at an intersection?

✓ Slow down and proceed only when it is safe.
Check only the direction that normally has the right-of-way.
Enter slowly so the other driver has time to react.
Proceed if the other driver appears to be slowing down.

If the right-of-way is unclear, reduce speed, observe carefully, and avoid entering the intersection until you are sure it is safe.

Vehicles approaching an intersection with uncertain priority
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
You should follow the vehicle in front as closely as possible in traffic.

518. You should follow the vehicle in front as closely as possible in traffic.

True.
✓ False.

You should keep a safe following distance so you have enough time to react if traffic slows or stops suddenly.

Vehicle following closely behind another vehicle
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if strong winds push your vehicle sideways?

519. What should you do if strong winds push your vehicle sideways?

✓ Keep calm and steer smoothly to maintain your lane.
Release the steering wheel briefly and let the vehicle settle.
Brake hard immediately to stop the vehicle moving sideways.
Turn sharply against the direction of the wind.

Strong winds can push your vehicle off course, especially at higher speeds. Reduce speed and use smooth steering to stay in control.

Crosswind affecting a vehicle's road position
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Where should you change a flat tire?

520. Where should you change a flat tire?

On a slight slope if the parking brake is applied.
On soft ground if the jack appears stable.
✓ On firm, level ground well away from moving traffic.
Where the puncture occurred, as long as the hazard lights are on.

The vehicle must be stable and protected from traffic. Apply the parking brake and follow the manufacturer's wheel-changing instructions.

Wheel change on firm ground away from traffic
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should a motorcycle helmet be worn correctly and securely fastened?

521. Why should a motorcycle helmet be worn correctly and securely fastened?

✓ To reduce the risk of serious head injury in a collision.
To prevent the motorcycle from skidding.
To reduce fuel consumption at higher speeds.
To make the motorcycle easier to balance.

A correctly fitted and securely fastened motorcycle helmet helps protect the rider's head and can reduce the risk and severity of head injury in a collision or fall.

Motorcyclist wearing a securely fastened helmet
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should the driver's floor mat be properly secured?

522. Why should the driver's floor mat be properly secured?

It could prevent the seat belt from locking.
It could reduce the effectiveness of the airbags.
It could cause the tires to lose pressure.
✓ It could slide forward and interfere with the pedals.

A loose or incorrectly fitted floor mat can move into the pedal area and interfere with the accelerator, brake, or clutch. Make sure the driver's floor mat is correctly fitted, secured, and does not obstruct any pedal.

Driver's floor mat near the pedals
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do when the road is covered with snow or ice?

523. What should you do when the road is covered with snow or ice?

✓ Reduce speed, increase following distance, and drive gently.
Drive at the normal speed limit if the road looks clear.
Use quick steering movements if the vehicle starts to slide.
Brake firmly in curves to keep control.

Snow and ice greatly reduce tire grip. Lower speed, extra distance, and gentle steering, braking, and acceleration help maintain control.

Vehicle traveling on a snow-covered road
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Which foot should normally operate the brake and accelerator in an automatic vehicle?

524. Which foot should normally operate the brake and accelerator in an automatic vehicle?

The left foot.
✓ The right foot.
Both feet together.
Either foot at the same time.

In an automatic vehicle, the right foot should normally operate both the brake and accelerator pedals. The left foot should rest on the footrest to reduce the risk of pressing both pedals at the same time.

Right-foot control of an automatic vehicle's pedals
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if you are approaching an animal-drawn vehicle?

525. What should you do if you are approaching an animal-drawn vehicle?

✓ Slow down and pass carefully with plenty of space.
Pass quickly before the animal changes direction.
Flash your headlights to encourage it to move aside.
Sound your horn so the driver notices you.

Animals can be startled by noise or sudden movement. Reduce speed, keep distance, and pass only when it is safe.

Vehicle approaching an animal-drawn vehicle
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What normally happens to cruise control when you press the brake pedal?

526. What normally happens to cruise control when you press the brake pedal?

The accelerator pedal locks in position.
✓ Cruise control is canceled or temporarily disengaged.
The parking brake is applied.
The selected speed increases.

Pressing the brake pedal normally cancels or temporarily disengages cruise control, returning speed control to the driver.

Brake-pedal operation to disengage cruise control
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do when approaching a narrow road with oncoming traffic?

527. What should you do when approaching a narrow road with oncoming traffic?

Expect the oncoming driver to make room for you.
Move closer to the road edge without reducing speed.
Continue first if you entered the narrow section earlier.
✓ Slow down and give space when needed.

On narrow roads, reduce speed and be prepared to stop or use a suitable passing place. Leave enough space for the oncoming vehicle and avoid forcing either vehicle into an unsafe position.

Oncoming vehicles approaching a narrow stretch of road
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
How should you brake on a slippery road?

528. How should you brake on a slippery road?

✓ Brake gently and progressively.
Apply the brakes suddenly before the tires lose grip.
Brake harder than usual to shorten the stopping distance.
Steer sharply while braking to avoid slippery areas.

Sudden braking can cause the wheels to lose grip. Smooth, progressive braking reduces the risk of skidding.

Braking on a slippery road surface
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do when a bus signals to pull away from a bus stop?

529. What should you do when a bus signals to pull away from a bus stop?

✓ Slow down and be prepared to let it move out when safe.
Accelerate and pass before the bus moves out.
Drive closely beside the bus to prevent it moving out.
Sound your horn so the bus waits for you.

Buses may pull away after picking up passengers. Slow down, check the traffic situation, and allow space when it is safe.

Bus signaling to pull away from a stop
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if your high beams could cause glare for another driver?

530. What should you do if your high beams could cause glare for another driver?

✓ Switch to low-beam headlights.
Flash the high beams briefly before passing.
Move farther from the center and keep the high beams on.
Reduce speed but leave the high beams on.

High beams can cause glare for other road users and reduce their visibility. Switch to low-beam headlights whenever your high beams could cause glare for another driver.

Headlight glare affecting another road user
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
You may ignore a stop sign if the road looks empty.

531. You may ignore a stop sign if the road looks empty.

✓ False.
True.

A stop sign means you must come to a complete stop, even if no other traffic is visible.

Stop sign at a quiet intersection
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you reduce speed in residential areas?

532. Why should you reduce speed in residential areas?

Because residential roads are usually more slippery.
Traffic from side roads must always yield.
✓ Pedestrians, bicyclists, and children may be nearby.
Parked vehicles have the right-of-way over moving traffic.

Residential areas often have pedestrians, bicyclists, parked vehicles, driveways, and children, and hazards may appear suddenly. Lower speed gives you more time to react and stop safely.

Vehicle traveling through a residential street
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you avoid sudden steering movements on snow or ice?

533. Why should you avoid sudden steering movements on snow or ice?

✓ They can cause the tires to lose grip and the vehicle to skid.
They make the steering wheel harder to turn.
They make the tires wear more quickly.
They increase fuel consumption.

Abrupt steering can overwhelm the limited grip available on a slippery surface. Steering smoothly helps keep the vehicle stable.

Steering a vehicle on a snowy road
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why is a larger following distance needed at freeway speeds?

534. Why is a larger following distance needed at freeway speeds?

It keeps the engine from working too hard.
✓ You need more distance to react and stop safely.
It reduces the effect of crosswinds.
It makes the vehicle easier to steer.

At higher speeds, you travel farther during your reaction time and need more distance to brake. A larger gap gives you more time and space to stop safely.

Following distance between vehicles on a freeway
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you check shortly after securing a load?

535. What should you check shortly after securing a load?

✓ Stop safely and check that the restraints are still tight.
Check the load only when you reach your destination.
Loosen the restraints slightly after the load has settled.
Assume the load is secure once the trip has started.

Loads may settle and straps may loosen after the trip begins. Recheck them at a safe stopping place.

Rechecking straps securing a vehicle's load
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you not rely only on a backup camera?

536. Why should you not rely only on a backup camera?

It shows every blind spot around the vehicle.
It guarantees that the path behind is clear.
It removes the need to look around before backing up.
✓ It may not show everything around the vehicle.

Backup cameras can help, but they may have blind spots and limited coverage. Always check your mirrors and surroundings, look around where possible, and back up slowly.

Backup-camera display inside a vehicle
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if a gear does not engage easily in a manual vehicle?

537. What should you do if a gear does not engage easily in a manual vehicle?

✓ Avoid forcing the gearshift lever.
Push the lever harder until the gear engages.
Press the accelerator fully.
Release the clutch suddenly.

If a gear does not engage easily, do not force the gearshift lever. Make sure the clutch pedal is fully pressed and the vehicle's speed is suitable for the gear before trying again.

Operating a manual gearshift lever without forcing it
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why is it important to use bicycle lights at night?

538. Why is it important to use bicycle lights at night?

They give bicyclists the right-of-way over other traffic.
✓ They help you see and help others notice you.
They are needed only on roads without street lighting.
They make the bicycle easier to control.

Front and rear lights improve visibility and make it easier for drivers, bicyclists, and pedestrians to detect you.

Bicycle lights used when riding at night
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you avoid placing objects on or over an airbag cover?

539. Why should you avoid placing objects on or over an airbag cover?

✓ They could interfere with deployment and become dangerous projectiles.
They could cause the airbag warning light to stay on.
They could make the dashboard harder to clean.
They could make the airbag deploy too slowly.

Do not place or attach objects over an airbag cover or in an airbag's deployment area. They may interfere with the airbag as it inflates and could be thrown toward occupants when the airbag deploys.

Objects placed over a vehicle's airbag cover
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if you miss your freeway exit?

540. What should you do if you miss your freeway exit?

Cross the painted separation area back to the exit.
Use an emergency opening in the central reservation.
Turn around if traffic is light enough.
✓ Continue to the next exit.

Never back up or make a sudden maneuver. Continue safely and change your route at the next suitable exit.

Vehicle continuing past a freeway exit
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if your vehicle begins to skid on ice?

541. What should you do if your vehicle begins to skid on ice?

Press the brake pedal hard and hold it.
✓ Ease off the accelerator and steer smoothly in the direction you want to travel.
Apply the parking brake to straighten the vehicle.
Accelerate sharply to regain traction.

Avoid sudden braking or steering. Look where you want to go and use gentle controls while the tires regain grip.

Vehicle skidding on an icy road
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this vehicle-control symbol indicate?

542. What does this vehicle-control symbol indicate?

✓ Exterior mirror folding.
Exterior mirror adjustment.
Seat adjustment.
Power window control.

This control folds or unfolds the vehicle's exterior mirrors. It is useful when parking in narrow spaces or when leaving the vehicle parked.

Control for folding the exterior mirrors
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do before driving if snow or ice covers your vehicle?

543. What should you do before driving if snow or ice covers your vehicle?

Clear only the areas needed for your immediate view.
Clear only the windows and mirrors.
✓ Clear the windows, mirrors, lights, roof, and license plates.
Let the heater clear the ice while you drive.

You need a clear view in every direction. Snow or ice left on the roof can also fall or blow onto other road users.

Clearing snow and ice from a vehicle before driving
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if your lane is blocked by an obstacle?

544. What should you do if your lane is blocked by an obstacle?

Signal and expect oncoming traffic to make room.
Speed up to keep traffic flowing around the obstacle.
Follow another vehicle around it without checking yourself.
✓ Slow down, check carefully, and yield if needed.

If your lane is blocked, reduce speed, check mirrors and oncoming traffic, and only move around the obstacle when it is safe.

Obstacle blocking a vehicle's lane
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if your vehicle becomes stuck on a railroad crossing?

545. What should you do if your vehicle becomes stuck on a railroad crossing?

✓ Get everyone out, move away, and contact the emergency services.
Move everyone beside the vehicle while waiting.
Stay inside the vehicle and call for assistance.
Try to restart the vehicle until help arrives.

Move everyone well away from the tracks. Use the crossing emergency telephone or displayed contact information where available, or contact the emergency services immediately.

Vehicle stranded on a railroad crossing
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do with a child restraint after a collision?

546. What should you do with a child restraint after a collision?

Replace only the seat cover.
Use it normally after tightening the straps.
Repair damaged parts yourself.
✓ Follow the manufacturer's instructions about inspection or replacement.

A child restraint may be damaged in a collision even when the damage is not obvious. Follow the manufacturer's instructions, as the restraint may need to be inspected or replaced before it is used again.

Child car seat requiring inspection after a collision
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do with the steering wheel after completing a turn?

547. What should you do with the steering wheel after completing a turn?

Release it completely and let it spin freely.
✓ Guide it smoothly back toward the straight-ahead position.
Hold it in the turned position.
Turn it quickly in the opposite direction.

After completing a turn, guide the steering wheel smoothly back toward the straight-ahead position while maintaining control. Do not allow the wheel to spin freely through your hands.

Guiding the steering wheel back after a turn
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you normally select before leaving an automatic vehicle parked?

548. What should you normally select before leaving an automatic vehicle parked?

D (Drive).
R (Reverse).
✓ P (Park).
N (Neutral).

Select P (Park) before leaving an automatic vehicle parked. Park locks the transmission to help prevent the vehicle from rolling; the parking brake should also be applied.

Park position on an automatic gear selector
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you never leave a child or pet alone in a parked vehicle on a warm day?

549. Why should you never leave a child or pet alone in a parked vehicle on a warm day?

The tires may lose pressure while the vehicle is parked.
The alarm system may activate unexpectedly.
✓ The interior can heat up quickly and cause serious heat illness.
The vehicle battery may discharge more quickly.

The inside of a parked vehicle can heat up rapidly, even when the outside temperature does not feel extreme. Children and animals are particularly vulnerable to overheating and heatstroke. Leaving a window partly open does not make the vehicle safe.

Parked vehicle and the danger of interior heat
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What can selecting a lower gear provide in a manual vehicle?

550. What can selecting a lower gear provide in a manual vehicle?

A shorter steering ratio.
Automatic parking-brake operation.
Higher tire pressure.
✓ Greater engine braking.

Selecting a suitable lower gear can increase engine braking, helping the vehicle slow or control its speed without relying entirely on the brakes.

Manual gear selection for engine braking
AI-generated by Traffic-rules.com • WCIT • CC BY-SA