Support us

QuizTraffic rulesUruguay

This interesting quiz helps you test your knowledge in a clear and visual way. With easy multiple-choice questions, you can quickly build confidence and learn new facts while keeping it simple, interactive, and fun.

Traffic signs
Traffic rules
Uruguay
True/false 17 Uruguay 20 Car controls 109 Dashboard lights 40 Priority rules 9 Pedestrians 19 Cyclists 20 Show all 587
What does this vehicle-control symbol indicate?

201. What does this vehicle-control symbol indicate?

Steering-wheel adjustment.
✓ Seat adjustment.
Seat heating.
Lumbar support.

This control adjusts the position of the seat. Depending on the vehicle, it may move the seat forwards or backwards, raise or lower it, or change the backrest angle.

Control for adjusting the driver's seat
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
How should you pass a large vehicle in strong winds?

202. How should you pass a large vehicle in strong winds?

Use the horn before moving alongside the vehicle.
Accelerate sharply as soon as you start passing.
Keep the steering fixed while you move past it.
✓ Be prepared for sudden wind changes when passing.

Large vehicles can block wind and then expose you to strong gusts when you pass them.

Vehicle passing a large vehicle in windy conditions
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
You should always wear a seat belt, even on short trips.

203. You should always wear a seat belt, even on short trips.

False.
✓ True.

Seat belts reduce the risk of serious injury and should be worn on every trip, even short ones.

Driver wearing a seat belt for a car journey
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do when driving through heavy rain?

204. What should you do when driving through heavy rain?

Accelerate through the rain to clear it more quickly.
✓ Reduce speed and increase your following distance.
Drive closer to the vehicle ahead for guidance.
Use main beam to improve visibility.

Heavy rain reduces grip and visibility. Lower speed and extra distance give you more time to react safely.

Vehicle travelling through heavy rain
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do when approaching a tunnel?

205. What should you do when approaching a tunnel?

✓ Use the correct lights and keep a safe distance.
Increase speed to spend less time inside.
Drive closer to the vehicle ahead for guidance.
Switch on the hazard lights before entering.

When entering a tunnel, use the correct lights, keep enough distance, and stay alert for slower traffic.

Vehicle approaching a road tunnel
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you avoid placing objects on or over an airbag cover?

206. Why should you avoid placing objects on or over an airbag cover?

They could prevent the seat belt from locking.
✓ They could interfere with deployment and become dangerous projectiles.
They could make the airbag deploy too slowly.
They could cause the airbag warning light to stay on.

Do not place or attach objects over an airbag cover or in an airbag's deployment area. They may interfere with the airbag as it inflates and could be thrown towards occupants when the airbag deploys.

Objects placed over a vehicle's airbag cover
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you avoid overloading a trailer?

207. Why should you avoid overloading a trailer?

It improves braking on steep roads.
It reduces tyre wear on the towing vehicle.
It keeps the trailer more stable in strong winds.
✓ It can reduce stability and place excessive strain on the vehicle.

Overloading can affect braking, steering, tyres, suspension, and trailer stability. Always remain within permitted limits. After loading, check that the load is secure and correctly distributed before starting your journey.

Loaded trailer and towing limits
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this vehicle-control symbol indicate?

208. What does this vehicle-control symbol indicate?

Boot release.
✓ Central door locking.
Window lock.
Mirror adjustment.

This control operates the vehicle's central door locking system. Pressing it locks or unlocks the vehicle's doors, depending on the current lock state.

Central door-locking control and symbol
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if you notice an unfamiliar fluid underneath your vehicle?

209. What should you do if you notice an unfamiliar fluid underneath your vehicle?

Assume a small leak is harmless condensation.
Top up the fluid levels and continue driving.
Wait until the vehicle develops another problem.
✓ Do not ignore it. Identify the fluid and arrange an inspection if necessary.

Clear water from air conditioning can be normal, but oil, coolant, fuel, transmission fluid, or brake fluid may indicate a fault requiring urgent attention.

Fluid leaking underneath a parked vehicle
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why are roads especially slippery during rain after a dry period?

210. Why are roads especially slippery during rain after a dry period?

✓ Oil, dust, and dirt mix with water on the road surface.
Cold rain quickly reduces the tyre pressure.
The first rain makes the road surface softer.
Tyres need time to adjust to a wet road.

After a dry period, oil and dirt can build up on the road. The first rain mixes with them and can make the surface very slippery.

Rain falling on a road after dry weather
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
How can worn tyres affect driving in heavy rain?

211. How can worn tyres affect driving in heavy rain?

They shorten the stopping distance on wet roads.
They make steering more responsive in heavy rain.
They reduce the chance of skidding at low speeds.
✓ They increase the risk of aquaplaning.

Tyre tread helps channel water away and maintain grip. Worn tyres cannot clear water as effectively, increasing stopping distance and the risk of aquaplaning.

Worn tyre tread and wet-road grip
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you switch on dipped headlights before entering a tunnel?

212. Why should you switch on dipped headlights before entering a tunnel?

To prevent the tunnel lights from becoming too bright.
To keep the windscreen from misting.
To reduce tyre wear inside the tunnel.
✓ To improve visibility and help other road users see you.

Tunnel lighting may be much darker than daylight. Dipped headlights help you see and make your vehicle more visible.

Vehicle using dipped headlights before entering a tunnel
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What is important when raising a vehicle with its jack?

213. What is important when raising a vehicle with its jack?

✓ Use the correct jacking point and never go underneath a vehicle on a jack.
Raise the vehicle before applying the parking brake.
Use any solid-looking part underneath the vehicle.
Place the jack on soft ground to prevent floor damage.

A jack can slip or fail if it is incorrectly positioned. Secure the vehicle and use additional approved supports before working underneath it.

Vehicle raised at a jacking point for a wheel change
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this dashboard symbol indicate?

214. What does this dashboard symbol indicate?

Charging-system warning.
Diesel particulate filter warning.
✓ Engine-management warning.
Oil-pressure warning.

This symbol indicates a fault detected by the engine-management or emissions-control system. If it remains illuminated while driving, the vehicle should be checked according to the manufacturer's instructions.

Engine-management warning symbol on the dashboard
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do before driving down a long, steep hill?

215. What should you do before driving down a long, steep hill?

Coast in neutral to save fuel.
Rely mainly on continuous braking to control speed.
Accelerate before the descent to maintain momentum.
✓ Reduce speed and select a suitable lower gear.

A lower gear helps control your speed and reduces the amount of continuous braking needed on a long descent.

Vehicle approaching a long, steep descent
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if the brakes fade during a long descent?

216. What should you do if the brakes fade during a long descent?

Accelerate between bends to reduce brake use.
✓ Select a lower gear and stop safely to allow the brakes to cool.
Keep pressing the brakes continuously all the way downhill.
Switch off the engine to help slow the vehicle.

Continuous braking can cause overheating and reduced braking performance. A lower gear provides engine braking and reduces demand on the brakes.

Vehicle descending a hill with overheating brakes
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why is high-visibility clothing useful during a roadside breakdown?

217. Why is high-visibility clothing useful during a roadside breakdown?

It makes hazard warning lights unnecessary.
It protects you from injury if a vehicle hits you.
It gives you priority when walking beside the road.
✓ It makes you easier for approaching drivers and recovery workers to see.

High-visibility clothing improves your visibility, especially at night or in poor weather, but you must still remain away from traffic.

High-visibility clothing worn during a roadside breakdown
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this dashboard symbol indicate?

218. What does this dashboard symbol indicate?

Low engine oil.
✓ Low engine coolant level.
Engine overheating.
Low washer fluid.

This symbol indicates that the engine coolant level is low. Check the coolant level when the engine is cool and refill it with the correct coolant if necessary.

Low coolant-level warning symbol on the dashboard
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does it mean to cover the brake pedal?

219. What does it mean to cover the brake pedal?

Apply the parking brake slightly.
✓ Position your right foot over the brake, ready to press it.
Rest your foot lightly on the brake while driving.
Press the brake and accelerator together.

To cover the brake, move your right foot over the brake pedal without pressing it, so you are ready to brake quickly if a hazard develops.

Right foot positioned over the brake pedal
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this dashboard symbol indicate?

220. What does this dashboard symbol indicate?

Front fog lights.
✓ Main beam.
Dipped headlights.
Rear fog lights.

This symbol indicates that the main beam headlights are switched on. Main beam illuminates the road farther ahead but can dazzle other road users, so it should be changed to dipped headlights when necessary.

Main-beam headlight symbol on the dashboard
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this dashboard symbol indicate?

221. What does this dashboard symbol indicate?

Power-steering warning.
Brake-system warning.
Charging-system warning.
✓ Service or maintenance required.

This symbol indicates that the vehicle requires servicing or maintenance. The exact meaning and required maintenance can vary between vehicles, so check the vehicle information display or owner's manual.

Service reminder symbol on the dashboard
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does pulling the lighting stalk towards you normally do?

222. What does pulling the lighting stalk towards you normally do?

Activate the hazard warning lights.
Switch on the front fog lights.
Activate the direction indicators.
✓ Flash the main-beam headlights.

Pulling the lighting stalk towards you normally flashes the main-beam headlights. This briefly illuminates the main beam while the stalk is held or operated.

Lighting stalk used to flash the main-beam headlights
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
How should you leave a broken-down vehicle when traffic is passing nearby?

223. How should you leave a broken-down vehicle when traffic is passing nearby?

Leave through the door nearest moving traffic.
Stand beside the vehicle before moving away.
✓ Use the door furthest from moving traffic when it is safe to do so.
Walk around the vehicle on the traffic side.

Leaving through the side away from traffic reduces the risk of being struck by a passing vehicle.

Leaving a broken-down vehicle away from passing traffic
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why can bridges be dangerous in strong winds?

224. Why can bridges be dangerous in strong winds?

✓ They are often exposed to stronger gusts.
Steering works less effectively above water.
Bridge lighting makes it harder to judge speed.
Vehicles require more engine power on bridges.

Bridges are often open and exposed, allowing strong winds to affect vehicles more suddenly.

Exposed bridge in strong wind
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you consider before selecting a lower gear in a manual vehicle?

225. What should you consider before selecting a lower gear in a manual vehicle?

✓ Whether the vehicle's speed is suitable for the lower gear.
Whether the parking brake is applied.
Whether the headlights are switched on.
Whether the steering wheel is centred.

Before selecting a lower gear, make sure the vehicle's speed is suitable for that gear. Selecting too low a gear at excessive speed can cause harsh engine braking and place unnecessary stress on the drivetrain.

Selecting a lower gear in a manual vehicle
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
How should a three-point seat belt normally be worn during pregnancy?

226. How should a three-point seat belt normally be worn during pregnancy?

✓ With the lap belt low across the hips and the shoulder belt across the chest.
Using only the lap section of the seat belt.
With the lap belt positioned across the abdomen.
With the shoulder belt placed behind the back.

During pregnancy, a three-point seat belt should be worn correctly. The lap belt should sit low across the hips, below the abdomen, while the shoulder belt should pass across the chest and to the side of the abdomen. The belt should fit snugly and should not be placed behind the back or under the arm.

Seat-belt positioning during pregnancy
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What do the + and − controls of cruise control normally do?

227. What do the + and − controls of cruise control normally do?

Apply or release the parking brake.
Change the transmission gear.
✓ Increase or decrease the selected cruising speed.
Switch between cruise control and the speed limiter.

When cruise control is active, the + and − controls normally increase or decrease the selected cruising speed. The amount of each adjustment can vary between vehicles.

Plus and minus controls for the cruising speed
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do before rejoining traffic after a breakdown?

228. What should you do before rejoining traffic after a breakdown?

Check your mirrors only and pull out if they look clear.
Enter the lane slowly so other traffic has time to react.
✓ Check all around, signal, and enter only when there is a safe gap.
Signal and expect approaching traffic to slow down.

Check mirrors and blind spots, signal clearly, and build up speed safely without causing approaching traffic to brake suddenly.

Vehicle preparing to rejoin traffic after a breakdown
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this dashboard symbol indicate?

229. What does this dashboard symbol indicate?

✓ Dipped headlights.
Main beam.
Front fog lights.
Rear fog lights.

This symbol indicates that the dipped headlights are switched on. Dipped headlights illuminate the road ahead while limiting glare for other road users.

Dipped-headlight symbol on the dashboard
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do after fitting a temporary spare wheel?

230. What should you do after fitting a temporary spare wheel?

Use it as a permanent replacement if it looks undamaged.
Drive normally if the vehicle feels stable.
✓ Follow its speed and distance restrictions and replace it as soon as possible.
Increase its pressure to match the other tyres.

Temporary spare wheels may have limited speed, distance, and handling capabilities. Arrange a proper repair or replacement promptly.

Temporary spare wheel fitted to a vehicle
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What is the button on a manual handbrake lever used for?

231. What is the button on a manual handbrake lever used for?

✓ To release the handbrake mechanism.
To apply the service brakes.
To select reverse gear.
To unlock the steering.

To release a manual handbrake, pull the lever up slightly, press and hold the release button, then lower the lever under control.

Release button on a manual handbrake lever
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
How should luggage be carried on a bicycle?

232. How should luggage be carried on a bicycle?

On one side of the bicycle to leave the other side clear.
On the rear carrier without securing it for a short trip.
As high as possible to keep it away from the wheels.
✓ Securely, without affecting steering, braking, or balance.

Loose or badly positioned luggage can interfere with control, become caught in the wheels, or hide bicycle lights.

Luggage carried on a bicycle
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you avoid using air recirculation for too long in damp conditions?

233. Why should you avoid using air recirculation for too long in damp conditions?

✓ It can cause the windows to mist.
It can overheat the engine.
It can reduce tyre pressure.
It can switch off the air conditioning.

Using air recirculation for too long in damp conditions can allow moisture to build up inside the vehicle and increase window misting, especially when the air conditioning is not dehumidifying the air. Switching to fresh outside air can help clear condensation.

Air-recirculation setting and misted vehicle windows
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do when an automatic vehicle is stationary in D?

234. What should you do when an automatic vehicle is stationary in D?

✓ Keep the brake pedal pressed.
Press the accelerator lightly.
Select reverse gear.
Release the parking brake.

An automatic vehicle may creep forward when D (Drive) is selected, even without pressing the accelerator. Keep the brake pedal pressed while stationary to prevent unintended movement.

Automatic gear selector in Drive and brake-pedal control
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
How should cyclists ride when travelling in a group?

235. How should cyclists ride when travelling in a group?

Ride as close together as possible to stay as one group.
✓ Predictably, with safe gaps and clear communication.
Keep the same speed even when gaps become unsafe.
Ride side by side even when traffic cannot pass safely.

Safe spacing and communication help group members respond to braking, turns, obstacles, and changing traffic conditions.

Group of cyclists riding along a road
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this dashboard symbol indicate?

236. What does this dashboard symbol indicate?

Parking brake applied.
✓ Brake-pad wear warning.
Low tyre pressure.
ABS fault.

This symbol indicates that the brake pads may be worn and should be inspected. Continuing to drive with excessively worn brake pads can reduce braking performance and damage other brake components.

Brake-pad wear warning symbol on the dashboard
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this dashboard symbol indicate?

237. What does this dashboard symbol indicate?

Lane-departure warning.
✓ Parking assistance.
Automatic emergency braking.
Adaptive cruise control.

This symbol relates to the vehicle's parking assistance system. Depending on the vehicle, the system may use sensors or cameras to detect obstacles and assist the driver while parking.

Parking-assistance symbol on the dashboard
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you hold the steering wheel firmly during strong gusts?

238. Why should you hold the steering wheel firmly during strong gusts?

To reduce braking distance.
To make the power steering work better.
To keep the suspension level.
✓ To maintain control if the vehicle is pushed.

A firm but relaxed grip helps you respond safely to sudden changes caused by wind.

Driver holding the steering wheel during strong gusts
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
How should a motorcyclist cross tram or railway rails?

239. How should a motorcyclist cross tram or railway rails?

✓ At a safe angle, as close to perpendicular as practical.
With the motorcycle leaning sharply.
By accelerating hard as the front wheel reaches the rail.
At a very shallow angle alongside the rails.

Rails can be slippery and can catch a motorcycle tyre, especially when wet. Cross them at a sufficiently large angle, as close to perpendicular as practical, and avoid sudden braking, acceleration or steering while crossing.

Motorcycle crossing rails in the road
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Can drivers use a handheld phone while driving in Uruguay?

240. Can drivers use a handheld phone while driving in Uruguay?

✓ No.
Yes.

Drivers in Uruguay are generally not allowed to use a handheld phone while driving.

Driver using a handheld phone
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you not ignore temporary speed limits?

241. Why should you not ignore temporary speed limits?

They are recommendations rather than limits.
They apply only when traffic is congested.
They can be ignored when the road looks clear.
✓ They are used to protect people and manage hazards.

Temporary speed limits may be used near roadworks, accidents, events, or dangerous conditions. They help keep traffic safe.

Temporary speed-limit sign at roadworks
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What normally happens to cruise control when you press the brake pedal?

242. What normally happens to cruise control when you press the brake pedal?

The accelerator pedal locks in position.
The selected speed increases.
✓ Cruise control is cancelled or temporarily disengaged.
The parking brake is applied.

Pressing the brake pedal normally cancels or temporarily disengages cruise control, returning speed control to the driver.

Brake-pedal operation to disengage cruise control
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do before changing lanes?

243. What should you do before changing lanes?

Check only the lane directly beside you.
Rely on your mirrors without checking the blind spot.
Speed up and move over before nearby traffic catches up.
✓ Check your mirrors and blind spot.

Always check your mirrors, look over your shoulder if necessary, and make sure it is safe before changing lanes.

Driver checking surrounding traffic before changing lanes
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you make sure drivers have seen you before crossing?

244. Why should you make sure drivers have seen you before crossing?

Once a driver sees you, no further checks are needed.
✓ To reduce the risk of stepping into their path.
Making eye contact gives you priority.
Eye contact means the driver must stop for you.

Before crossing, make sure approaching drivers have noticed you and that it is safe to proceed. Do not assume that a driver will stop simply because you have seen each other.

Pedestrian checking whether an approaching driver has seen them
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do before opening your car door near traffic?

245. What should you do before opening your car door near traffic?

Open the door slowly and expect traffic to avoid you.
✓ Check for cyclists, pedestrians, and vehicles.
Check only the mirror before opening the door.
Signal before opening the door without checking behind.

Before opening a car door, check carefully for cyclists, pedestrians, and vehicles to avoid causing a collision.

Checking for passing road users before opening a car door
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
How can air conditioning help demist the windows?

246. How can air conditioning help demist the windows?

By opening the windows automatically.
By heating the rear window directly.
✓ By removing moisture from the air.
By increasing air recirculation.

Using the air conditioning can help demist the windows because it removes moisture from the cabin air. Directing this drier air towards the windscreen can clear condensation more quickly.

Air-conditioning controls used to demist the windscreen
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Should rear-seat passengers be securely restrained?

247. Should rear-seat passengers be securely restrained?

Only if the vehicle does not have rear airbags.
Yes, but only children need restraints in the rear.
Only when travelling on motorways or at higher speeds.
✓ Yes, using seat belts or suitable child restraints as appropriate.

Rear-seat passengers should be securely restrained using seat belts or suitable child restraints as appropriate. Proper restraint reduces the risk of serious injury and prevents occupants from being thrown around or forwards in a collision.

Rear-seat passengers secured for a journey
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
How should you normally apply the brake pedal for a smooth stop?

248. How should you normally apply the brake pedal for a smooth stop?

Press it as hard as possible immediately.
Use the parking brake instead.
✓ Apply pressure progressively.
Pump the pedal repeatedly.

For normal braking, apply the brake pedal progressively and smoothly. As the vehicle comes to a stop, easing the pressure slightly can help avoid a sudden jerk.

Progressive brake-pedal pressure for a smooth stop
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do with the parking brake when parking on a slope?

249. What should you do with the parking brake when parking on a slope?

✓ Apply it firmly.
Release it completely.
Leave it partly applied.
Use it only if the engine is running.

When parking on a slope, apply the parking brake firmly to help prevent the vehicle from rolling. Selecting an appropriate gear or Park provides additional security.

Using the parking brake when parking on a slope
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this dashboard symbol indicate?

250. What does this dashboard symbol indicate?

Brake-system warning.
✓ Airbag system warning.
Power-steering warning.
Seat-belt reminder.

This symbol indicates a possible fault in the airbag or supplementary restraint system. If it remains illuminated while driving, the system should be checked because one or more airbags or seat-belt pretensioners may not operate correctly in a collision.

Airbag-system warning symbol on the dashboard
AI-generated by Traffic-rules.com • WCIT • CC BY-SA