QuizTraffic rulesUnited Kingdom

Test your knowledge with our multiple-choice quiz. Learn from each answer and improve your understanding of the traffic rules and road signs of United Kingdom.

For informational purposes only. Always follow official regulations. Some content and images were created with AI assistance.


What should you do when joining a motorway from an entry lane?

301. What should you do when joining a motorway from an entry lane?

Stop at the end of the entry lane and wait for a large gap.
Force your way into the nearest gap.
✓ Match your speed, check around you, and merge into a safe gap.
Enter at a low speed and let motorway traffic adjust.

Use the entry lane to build a suitable speed, check carefully, signal, and merge only when it is safe.

Vehicle joining a motorway from an entry lane
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you remember when using driver-assistance systems?

302. What should you remember when using driver-assistance systems?

The systems can take full responsibility for driving.
✓ You remain responsible and must stay alert.
The systems can always detect every hazard.
You only need to intervene when a warning appears.

Driver-assistance systems can help with tasks such as maintaining speed, monitoring lanes, or warning about hazards, but they do not replace the driver. Stay attentive, monitor the road and traffic, and be ready to take control whenever necessary.

Driver monitoring the road while using driver assistance
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Who normally has priority at roundabouts in United Kingdom?

303. Who normally has priority at roundabouts in United Kingdom?

✓ Traffic already on the roundabout.
Traffic entering the roundabout.

In United Kingdom, traffic entering a roundabout normally gives way to traffic already circulating.

Vehicles approaching and circulating on a roundabout
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
You should keep both hands ready to control the steering.

304. You should keep both hands ready to control the steering.

False.
✓ True.

Keeping proper control of the steering wheel helps you react safely to changes in traffic and road conditions.

Driver keeping both hands on the steering wheel
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this dashboard symbol indicate?

305. What does this dashboard symbol indicate?

Rear fog lights.
✓ Hazard warning lights.
Emergency braking.
Direction indicators.

This symbol indicates the hazard warning lights. When activated, all direction indicators flash simultaneously to warn other road users of a hazard or unusual situation.

Hazard warning light symbol on the dashboard
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if an animal is standing on the road at night?

306. What should you do if an animal is standing on the road at night?

Drive around it immediately without slowing down.
✓ Slow down and be prepared to stop.
Flash your headlights repeatedly to make it move.
Switch off your headlights as you approach.

Animals may freeze, turn back, or move unpredictably when caught in vehicle headlights.

Animal standing on a road at night
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do before reversing your vehicle?

307. What should you do before reversing your vehicle?

Check behind only after you start moving.
✓ Check all around and make sure it is safe.
Check the mirrors and reverse if they appear clear.
Rely on the reversing camera if one is fitted.

Before reversing, check all around the vehicle, including blind spots, for pedestrians, cyclists, vehicles, and other hazards. Reverse slowly and keep checking as you move.

Vehicle preparing to reverse from a driveway
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you avoid keeping the clutch pedal pressed while driving?

308. Why should you avoid keeping the clutch pedal pressed while driving?

It locks the steering.
✓ It reduces engine braking and vehicle control.
It applies the parking brake.
It increases tyre pressure.

Keeping the clutch pedal pressed while the vehicle is moving disconnects the engine from the transmission. This reduces engine braking and can reduce your control of the vehicle.

Clutch held down while a vehicle is moving
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this vehicle-control symbol indicate?

309. What does this vehicle-control symbol indicate?

Air recirculation.
Seat heating.
Air conditioning.
✓ Cabin temperature adjustment.

This control adjusts the temperature of the air supplied to the cabin. Turning it towards the blue side lowers the selected temperature, while turning it towards the red side raises it.

Control for adjusting the cabin temperature
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if someone is injured in a road collision?

310. What should you do if someone is injured in a road collision?

Remove a motorcyclist's helmet to check for injuries.
Give them food or drink while waiting for help.
Move them to a more comfortable position immediately.
✓ Call for help and avoid moving them unless there is immediate danger.

Moving an injured person can worsen spinal or other injuries. Keep them calm, protect them from further danger, and provide first aid only within your level of training.

Assistance for an injured person after a road collision
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if another vehicle is tailgating you?

311. What should you do if another vehicle is tailgating you?

✓ Stay calm and increase your safety margin ahead.
Tap the brakes to make them increase their distance.
Reduce the gap ahead so they cannot move into it.
Speed up to create more space behind you.

If someone follows too closely, avoid sudden actions. Keeping more space in front gives you more time to brake gently if needed. If it is safe, allow the tailgating vehicle to pass.

Following vehicle visible close behind
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this vehicle-control symbol indicate?

312. What does this vehicle-control symbol indicate?

Cruise control.
Electronic stability control.
✓ Speed limiter.
Adaptive cruise control.

The speed limiter allows the driver to set a maximum speed that the vehicle should not normally exceed while the accelerator is being used.

Vehicle speed-limiter control and symbol
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you normally do before starting an automatic vehicle?

313. What should you normally do before starting an automatic vehicle?

Select D and press the accelerator.
✓ Select P or N and press the brake pedal.
Select R and release the parking brake.
Leave the selector between two positions.

Before starting an automatic vehicle, make sure P (Park) or N (Neutral) is selected and press the brake pedal. Many automatic vehicles will only allow the engine to start when these conditions are met.

Gear selector and brake before starting an automatic vehicle
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if you are unsure who has priority at a junction?

314. What should you do if you are unsure who has priority at a junction?

Enter slowly so the other driver has time to react.
Rely on eye contact and enter the junction first.
Check only the direction that normally has priority.
✓ Slow down and proceed only when it is safe.

If priority is unclear, reduce speed, observe carefully, and avoid entering the junction until you are sure it is safe.

Vehicles approaching a junction with uncertain priority
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
How should cyclists ride when travelling in a group?

315. How should cyclists ride when travelling in a group?

Ride side by side even when traffic cannot pass safely.
Ride as close together as possible to stay as one group.
✓ Predictably, with safe gaps and clear communication.
Follow the cyclist ahead without checking traffic yourself.

Safe spacing and communication help group members respond to braking, turns, obstacles, and changing traffic conditions.

Group of cyclists riding along a road
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if another driver behaves aggressively towards you?

316. What should you do if another driver behaves aggressively towards you?

Respond with your horn and gestures.
✓ Stay calm, avoid confrontation, and create more distance.
Speed up to prevent them from passing you.
Stop beside them so you can discuss the problem.

If another driver behaves aggressively, do not retaliate or become involved in a confrontation. Stay calm, increase the distance between you, and let the other vehicle move away when possible. If you feel threatened, go to a safe public place and seek appropriate assistance.

Driver facing aggressive behaviour from another road user
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you avoid blocking a junction?

317. Why should you avoid blocking a junction?

Traffic lights may stop working.
Junctions may only be entered at low speed.
✓ Other traffic needs space to move safely.
Vehicles in a junction lose priority.

Blocking a junction can prevent vehicles, cyclists, or pedestrians from moving safely. Enter only when there is enough space to drive through and clear the junction.

Traffic blocking a road junction
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What makes up the total stopping distance of a vehicle?

318. What makes up the total stopping distance of a vehicle?

Braking distance and overtaking distance.
Visibility distance and reaction distance.
✓ Reaction distance and braking distance.
Reaction distance and following distance.

The total stopping distance consists of the distance travelled while the driver reacts to a hazard plus the distance travelled while the vehicle is braking to a stop.

Reaction and braking distances before a vehicle stops
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
How can strong crosswinds affect a vehicle towing a trailer?

319. How can strong crosswinds affect a vehicle towing a trailer?

✓ They can push the trailer sideways and reduce stability.
They make the trailer more stable at higher speeds.
They matter only when the trailer is empty.
They affect only the towing vehicle, not the trailer.

Trailers have large side surfaces and may be affected strongly by wind, especially on bridges and exposed roads.

Vehicle and trailer exposed to crosswinds
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Which pedal is used to slow down or stop the vehicle?

320. Which pedal is used to slow down or stop the vehicle?

The accelerator pedal.
The clutch pedal.
The footrest.
✓ The brake pedal.

The brake pedal is used to reduce the vehicle's speed or bring it to a stop. In a manual vehicle, it is the middle pedal.

Brake pedal in the driver's footwell
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Who is responsible for staying safe when crossing the road?

321. Who is responsible for staying safe when crossing the road?

✓ Everyone using the road.
Only drivers when pedestrians have priority.
Only pedestrians once they enter the road.
Only the road user without priority.

Road safety is a shared responsibility. Pedestrians, drivers, and cyclists all need to stay alert and follow the rules.

Pedestrians and traffic sharing a road crossing
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Are moped riders generally required to wear a helmet in United Kingdom?

322. Are moped riders generally required to wear a helmet in United Kingdom?

✓ Yes.
No.

Moped riders in United Kingdom are generally required to wear an approved helmet.

Moped rider wearing a helmet
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you check after fitting a wheel?

323. What should you check after fitting a wheel?

That the tyre is touching the wheel arch.
That the wheel nuts are covered by the trim.
That the jack remains partly under the vehicle.
✓ That the wheel nuts are tightened correctly.

After fitting a wheel, make sure the wheel nuts are tightened correctly using the manufacturer's specified procedure and torque. Incorrectly tightened wheel nuts can loosen or damage the wheel. Recheck them later if the vehicle or wheel manufacturer recommends it.

Checking wheel nuts after fitting a wheel
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
You should always wear a seat belt, even on short trips.

324. You should always wear a seat belt, even on short trips.

False.
✓ True.

Seat belts reduce the risk of serious injury and should be worn on every trip, even short ones.

Driver wearing a seat belt for a car journey
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What information is needed when requesting emergency assistance?

325. What information is needed when requesting emergency assistance?

Only the road name and nearest town.
✓ Your exact location, direction of travel, vehicle details, and the problem.
Your name, destination, and planned route.
Your insurance details and last service date.

Road numbers, junctions, location markers, direction of travel, and a clear description of the incident help assistance reach you quickly.

Requesting help after a vehicle breakdown
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you check before beginning a journey in severe winter weather?

326. What should you check before beginning a journey in severe winter weather?

Nothing extra if the vehicle has winter tyres.
Only whether the main roads have been cleared.
Only whether you have enough fuel or charge.
✓ The weather, road conditions, tyres, fuel or charge, and emergency supplies.

Check whether the journey is necessary and prepare for delays or changing conditions. Suitable tyres, sufficient fuel or charge, warm clothing, and basic emergency supplies may be important.

Preparing a vehicle for a winter journey
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this vehicle-control symbol indicate?

327. What does this vehicle-control symbol indicate?

✓ Windscreen washer.
Rear window demister.
Air recirculation.
Windscreen wiper speed.

This symbol indicates the windscreen washer. Operating the control sprays washer fluid onto the windscreen and normally activates the wipers to help clean the glass.

Windscreen-washer control and spray symbol
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do when approaching a tunnel?

328. What should you do when approaching a tunnel?

Drive closer to the vehicle ahead for guidance.
Stop and wait until the tunnel is clear.
Increase speed to spend less time inside.
✓ Use the correct lights and keep a safe distance.

When entering a tunnel, use the correct lights, keep enough distance, and stay alert for slower traffic.

Vehicle approaching a road tunnel
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you leave space beside large vehicles when they turn?

329. Why should you leave space beside large vehicles when they turn?

✓ They may need extra room to complete the turn.
They always have priority while turning.
They can turn only from the centre of the road.
They always turn more slowly than cars.

Large vehicles often swing wide when turning and have larger blind spots. Keep clear and do not move into the space beside them.

Large vehicle needing extra space to turn
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you avoid if your vehicle starts to skid?

330. What should you avoid if your vehicle starts to skid?

Stay calm and maintain control.
Use smooth steering movements.
Allow the tyres time to regain grip.
✓ Sudden braking, acceleration, or sharp steering.

Sudden braking, acceleration, or steering can make a skid worse. Stay calm and use smooth controls while the tyres regain grip.

Vehicle beginning to skid
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
How can you check which fuel is suitable for your vehicle?

331. How can you check which fuel is suitable for your vehicle?

Ask another driver with a similar-looking vehicle.
Use petrol unless the engine sounds like a diesel.
Choose whichever fuel is cheapest at the station.
✓ Check the fuel-filler label, fuel cap, or vehicle information.

Before refuelling, check which fuel type the vehicle requires. The correct fuel is often shown inside the fuel-filler flap, on or near the fuel cap, or in the vehicle information or owner's manual. Do not rely only on nozzle colours, as these can vary between filling stations and countries.

Checking the fuel label before refuelling
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why is adequate tyre tread important?

332. Why is adequate tyre tread important?

It makes wheel alignment unnecessary.
✓ It helps maintain grip and move water away from the tyre.
It increases the amount of power from the engine.
It keeps the tyres from becoming warm while driving.

Tyre tread helps the vehicle grip the road and disperse water. Worn tread increases the risk of skidding and aquaplaning, especially in wet conditions.

Tread grooves on a vehicle tyre
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
When should you select P (Park) in an automatic vehicle?

333. When should you select P (Park) in an automatic vehicle?

✓ After the vehicle has come to a complete stop.
Before braking to a stop.
While the vehicle is still moving slowly.
Whenever you want to reduce speed.

Select P (Park) only after the vehicle has come to a complete stop. Selecting Park while the vehicle is moving can damage the transmission.

Selecting Park after an automatic vehicle stops
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Should rear-seat passengers be securely restrained?

334. Should rear-seat passengers be securely restrained?

Only when travelling on motorways or at higher speeds.
Only if the vehicle does not have rear airbags.
Yes, but only children need restraints in the rear.
✓ Yes, using seat belts or suitable child restraints as appropriate.

Rear-seat passengers should be securely restrained using seat belts or suitable child restraints as appropriate. Proper restraint reduces the risk of serious injury and prevents occupants from being thrown around or forwards in a collision.

Rear-seat passengers secured for a journey
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if fog becomes so thick that you cannot see safely?

335. What should you do if fog becomes so thick that you cannot see safely?

Follow the vehicle ahead closely for guidance.
Continue slowly by following the road markings.
✓ Slow down and stop in a safe location away from traffic if necessary.
Stop immediately in the traffic lane.

If visibility becomes dangerously poor, find a safe place to stop rather than continuing without being able to see clearly.

Dense fog obscuring the road ahead
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if another driver does not give way when they should?

336. What should you do if another driver does not give way when they should?

✓ Slow down and avoid a collision.
Accelerate so you pass through first.
Maintain your speed because you have priority.
Move closer so the other driver is forced to give way.

Even if you have priority, safety comes first. Slow down, stay calm, and avoid creating a dangerous situation.

Conflicting vehicle movements at a junction
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
When should you use rear fog lights?

337. When should you use rear fog lights?

When visibility is slightly reduced.
When driving on high-speed roads at night.
✓ When visibility is seriously reduced by fog or similar conditions.
When another vehicle is following closely.

Rear fog lights are very bright and should only be used when visibility is poor enough to require them.

Rear fog lights used in severely reduced visibility
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What is the purpose of the seat-belt retractor?

338. What is the purpose of the seat-belt retractor?

✓ To take up slack and lock the belt when necessary.
To release the seat belt from the buckle.
To tighten the parking brake.
To adjust the seat height.

The seat-belt retractor takes up slack and helps keep the belt properly positioned against the body. It allows normal movement but can lock during sudden braking, rapid belt movement or a collision.

Seat-belt webbing and retracting mechanism
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if the service brakes fail while driving?

339. What should you do if the service brakes fail while driving?

✓ Reduce speed using other available braking methods and stop safely.
Apply the parking brake suddenly at full force.
Switch off the engine immediately while moving.
Shift into neutral and let the vehicle coast to a stop.

Remain calm, warn other road users, and use other available braking methods to reduce speed. This may include engine braking or a lower gear, and careful use of the parking or emergency brake according to the vehicle's design. Steer toward the safest available stopping area.

Vehicle braking-system failure while driving
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
How should you normally brake on a motorcycle?

340. How should you normally brake on a motorcycle?

Use only the rear brake.
✓ Use both brakes smoothly and progressively.
Alternate between the front and rear brakes.
Use only the front brake.

During normal braking, use both the front and rear brakes smoothly and progressively. The front brake normally provides much of the braking force, while the rear brake also helps slow and stabilise the motorcycle. Sudden or poorly balanced braking can reduce stability or cause a wheel to lose grip.

Motorcyclist using the front and rear brakes
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why is high-visibility clothing useful during a roadside breakdown?

341. Why is high-visibility clothing useful during a roadside breakdown?

It makes hazard warning lights unnecessary.
It protects you from injury if a vehicle hits you.
It gives you priority when walking beside the road.
✓ It makes you easier for approaching drivers and recovery workers to see.

High-visibility clothing improves your visibility, especially at night or in poor weather, but you must still remain away from traffic.

High-visibility clothing worn during a roadside breakdown
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you not rely only on a reversing camera?

342. Why should you not rely only on a reversing camera?

It makes mirrors unnecessary when reversing.
✓ It may not show everything around the vehicle.
It guarantees that the path behind is clear.
It shows every blind spot around the vehicle.

Reversing cameras can help, but they may have blind spots and limited coverage. Always check your mirrors and surroundings, look around where possible, and reverse slowly.

Reversing-camera display inside a vehicle
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Which foot should normally operate the brake and accelerator in an automatic vehicle?

343. Which foot should normally operate the brake and accelerator in an automatic vehicle?

The left foot.
✓ The right foot.
Both feet together.
Either foot at the same time.

In an automatic vehicle, the right foot should normally operate both the brake and accelerator pedals. The left foot should rest on the footrest to reduce the risk of pressing both pedals at the same time.

Right-foot control of an automatic vehicle's pedals
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if traffic ahead is blocking a junction?

344. What should you do if traffic ahead is blocking a junction?

✓ Wait until there is enough space to clear the junction.
Use the horn so traffic ahead moves forward.
Enter if the traffic light is green.
Enter the junction and wait for traffic to move.

Do not enter a junction if traffic ahead prevents you from clearing it safely. Waiting before the junction helps avoid blocking crossing traffic, pedestrians, cyclists, or other road users.

Queue of traffic blocking a junction
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you leave extra space behind a vehicle carrying animals?

345. Why should you leave extra space behind a vehicle carrying animals?

✓ Because it may move slowly or stop unexpectedly.
Because they cannot use their horn.
Because they must always travel in the centre of the road.
Because these vehicles always have priority.

Vehicles transporting animals may accelerate slowly, take bends carefully, or brake gently to protect their load.

Vehicle following an animal transporter
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do before leaving a motorway?

346. What should you do before leaving a motorway?

Signal only after entering the exit lane.
Wait until the exit begins before checking your mirrors.
Cross several lanes at the last moment.
✓ Check your mirrors, signal in good time, and enter the exit lane safely.

Plan your exit early, move into the correct lane safely, and reduce speed after entering the exit road where appropriate.

Vehicle preparing to take a motorway exit
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do before rejoining traffic after a breakdown?

347. What should you do before rejoining traffic after a breakdown?

Check your mirrors only and pull out if they look clear.
Enter the lane slowly so other traffic has time to react.
✓ Check all around, signal, and enter only when there is a safe gap.
Signal and expect approaching traffic to slow down.

Check mirrors and blind spots, signal clearly, and build up speed safely without causing approaching traffic to brake suddenly.

Vehicle preparing to rejoin traffic after a breakdown
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does the AUTO setting on the lighting control do?

348. What does the AUTO setting on the lighting control do?

It switches on the front fog lights.
It flashes the headlights automatically.
✓ It switches the headlights on or off automatically when needed.
It keeps the main beam switched on.

The AUTO lighting setting allows the vehicle to switch its exterior lights on or off automatically according to ambient light conditions. The driver remains responsible for ensuring that the correct lights are being used.

AUTO setting on the vehicle's lighting control
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
How should a motorcyclist cross tram or railway rails?

349. How should a motorcyclist cross tram or railway rails?

While braking firmly on the rails.
✓ At a safe angle, as close to perpendicular as practical.
By accelerating hard as the front wheel reaches the rail.
At a very shallow angle alongside the rails.

Rails can be slippery and can catch a motorcycle tyre, especially when wet. Cross them at a sufficiently large angle, as close to perpendicular as practical, and avoid sudden braking, acceleration or steering while crossing.

Motorcycle crossing rails in the road
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you check before starting a bicycle journey?

350. What should you check before starting a bicycle journey?

Only the brakes if the journey is short.
✓ The brakes, tyres, lights, and steering.
Nothing if the bicycle worked properly yesterday.
Only the tyres and chain.

A basic safety check can reveal problems with the brakes, tyres, lights, or steering before they cause an accident.

Checking a bicycle before a journey
AI-generated by Traffic-rules.com • WCIT • CC BY-SA