Support us

QuizTraffic rulesItaly

This interesting quiz helps you test your knowledge in a clear and visual way. With easy multiple-choice questions, you can quickly build confidence and learn new facts while keeping it simple, interactive, and fun.

Traffic signs
Traffic rules
Italy
True/false 17 Italy 32 Car controls 109 Dashboard lights 40 Priority rules 9 Pedestrians 19 Cyclists 20 Driving licence 40 Show all 639
What should you do if another vehicle is signalling to turn?

251. What should you do if another vehicle is signalling to turn?

Pull out because the vehicle will turn.
Use your horn and proceed immediately.
✓ Do not rely on the signal alone, proceed only when it is safe.
Assume the driver has seen you.

An indicator shows an intention, but it does not guarantee that the driver will turn. The signal may have been left on accidentally or the driver's intentions may change. Observe the vehicle's speed and position and proceed only when you are sure it is safe.

Another vehicle signalling to turn
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What is important when raising a vehicle with its jack?

252. What is important when raising a vehicle with its jack?

Work underneath if the jack appears stable.
Place the jack on soft ground to prevent floor damage.
Raise the vehicle before applying the parking brake.
✓ Use the correct jacking point and never go underneath a vehicle on a jack.

A jack can slip or fail if it is incorrectly positioned. Secure the vehicle and use additional approved supports before working underneath it.

Vehicle raised at a jacking point for a wheel change
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Which selector position is used to drive the vehicle backwards?

253. Which selector position is used to drive the vehicle backwards?

✓ R (Reverse).
P (Park).
N (Neutral).
D (Drive).

Select R (Reverse) when you need to drive the vehicle backwards. The vehicle should be stationary before selecting Reverse.

Automatic gear selector with P, R, N and D positions
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this vehicle-control symbol indicate?

254. What does this vehicle-control symbol indicate?

Air recirculation.
Windscreen wiper speed.
✓ Windscreen washer.
Rear window demister.

This symbol indicates the windscreen washer. Operating the control sprays washer fluid onto the windscreen and normally activates the wipers to help clean the glass.

Windscreen-washer control and spray symbol
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What may happen if you release the clutch too quickly when moving off?

255. What may happen if you release the clutch too quickly when moving off?

The headlights may switch off.
✓ The engine may stall.
The parking brake may engage.
The steering may lock.

Releasing the clutch pedal too quickly when moving off can cause the engine to stall. Release the clutch smoothly through the biting point while applying the accelerator progressively.

Clutch release and engine stalling when moving off
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do at a railway crossing with warning lights flashing?

256. What should you do at a railway crossing with warning lights flashing?

Continue if you cannot see or hear a train.
✓ Stop before the crossing and wait until it is safe to proceed.
Follow the vehicle ahead across the tracks.
Cross quickly before the train reaches the crossing.

Flashing warning lights mean a train may be approaching. Stop before the crossing and wait until the warning has ended and the crossing is clear.

Flashing warning lights at a railway crossing
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do with a child restraint after a collision?

257. What should you do with a child restraint after a collision?

Replace only the seat cover.
Use it normally after tightening the straps.
Repair damaged parts yourself.
✓ Follow the manufacturer's instructions about inspection or replacement.

A child restraint may be damaged in a collision even when the damage is not obvious. Follow the manufacturer's instructions, as the restraint may need to be inspected or replaced before it is used again.

Child car seat requiring inspection after a collision
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if you have taken drugs that may impair your driving?

258. What should you do if you have taken drugs that may impair your driving?

✓ Do not drive.
Wait until you feel more confident.
Drive only on familiar roads.
Drink coffee before driving.

Drugs can impair judgement, coordination, concentration, and reaction time. Their effects can be unpredictable and may continue after you feel that the main effects have passed. Do not drive while impaired.

Drug impairment and the decision not to drive
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What can selecting a lower gear provide in a manual vehicle?

259. What can selecting a lower gear provide in a manual vehicle?

✓ Greater engine braking.
A shorter steering ratio.
Higher tyre pressure.
Automatic parking-brake operation.

Selecting a suitable lower gear can increase engine braking, helping the vehicle slow or control its speed without relying entirely on the brakes.

Manual gear selection for engine braking
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you avoid resting your hand on the gear lever while driving?

260. Why should you avoid resting your hand on the gear lever while driving?

It can increase engine speed.
It can apply the parking brake.
It can disengage the clutch.
✓ It can cause unnecessary wear in the gear-selection mechanism.

Resting your hand on the gear lever can place unnecessary pressure on parts of the gear-selection mechanism and contribute to wear. Keep both hands on the steering wheel when you are not changing gear.

Driver's hand resting on a manual gear lever
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Are motorcycle riders generally required to wear a helmet in Italy?

261. Are motorcycle riders generally required to wear a helmet in Italy?

No.
✓ Yes.

Motorcycle riders in Italy are generally required to wear an approved helmet.

Motorcyclist wearing a protective helmet
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you avoid placing objects on or over an airbag cover?

262. Why should you avoid placing objects on or over an airbag cover?

They could cause the airbag warning light to stay on.
They could make the dashboard harder to clean.
They could prevent the seat belt from locking.
✓ They could interfere with deployment and become dangerous projectiles.

Do not place or attach objects over an airbag cover or in an airbag's deployment area. They may interfere with the airbag as it inflates and could be thrown towards occupants when the airbag deploys.

Objects placed over a vehicle's airbag cover
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
How should the interior rear-view mirror be adjusted?

263. How should the interior rear-view mirror be adjusted?

To show mainly the rear seats.
✓ To give a clear view through the rear window.
To point towards the left door mirror.
To show the driver's face.

Adjust the interior rear-view mirror before driving so that you have a clear view through the rear window without needing to move your head significantly.

Adjusting the interior rear-view mirror
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this vehicle-control symbol indicate?

264. What does this vehicle-control symbol indicate?

✓ Horn.
Parking assistance.
Cruise control.
Hazard warning lights.

This symbol indicates the horn control. The horn is used to warn other road users of your presence when necessary.

Vehicle horn control and symbol
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you obey traffic signs?

265. Why should you obey traffic signs?

To avoid checking for other road users.
✓ To improve safety for everyone.
To make other drivers responsible for your safety.
To make sure you always have priority.

Traffic signs help organise traffic and improve safety for drivers, cyclists, and pedestrians.

Traffic signs using Vienna-style designs
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Which control is normally used to switch between dipped and main beam headlights?

266. Which control is normally used to switch between dipped and main beam headlights?

The dashboard brightness control.
The hazard warning switch.
The windscreen-wiper stalk.
✓ The lighting stalk.

The lighting stalk is normally used to switch between dipped and main beam headlights. The exact movement varies between vehicles, so check the vehicle controls before driving.

Lighting stalk for switching between dipped and main beam
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do when approaching a curve with poor visibility?

267. What should you do when approaching a curve with poor visibility?

✓ Slow down and stay in your lane.
Maintain your speed if the road ahead appears clear.
Move slightly toward the centre for a better view.
Brake only after entering the curve if necessary.

A curve can hide oncoming traffic, obstacles, cyclists, or pedestrians. Reduce speed and keep a safe position.

Road bend with a restricted view ahead
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Can coffee, energy drinks, fresh air, or loud music replace proper rest when you are tired?

268. Can coffee, energy drinks, fresh air, or loud music replace proper rest when you are tired?

✓ No, they may only increase alertness temporarily.
Yes, if you use several of them together.
Yes, but only during daylight.
Yes, if the journey is less than one hour.

Coffee, energy drinks, fresh air, or loud music may make you feel more alert for a short time, but they do not remove fatigue. If you are too tired to drive safely, stop somewhere safe and get proper rest.

Stimulant drinks and driver tiredness
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Should rear-seat passengers be securely restrained?

269. Should rear-seat passengers be securely restrained?

✓ Yes, using seat belts or suitable child restraints as appropriate.
Only when travelling on motorways or at higher speeds.
Only if the vehicle does not have rear airbags.
No, only front-seat occupants need to be restrained.

Rear-seat passengers should be securely restrained using seat belts or suitable child restraints as appropriate. Proper restraint reduces the risk of serious injury and prevents occupants from being thrown around or forwards in a collision.

Rear-seat passengers secured for a journey
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you check for motorcyclists before changing lanes?

270. Why should you check for motorcyclists before changing lanes?

Motorcyclists are required to stay beside the kerb.
Motorcycles need more road space than cars.
✓ Motorcycles can be harder to see and may be in your blind spot.
Motorcycles always travel faster than other traffic.

Motorcyclists are smaller and can be hidden in blind spots. Check mirrors, signal, and look carefully before changing lanes.

Motorcycle near a vehicle preparing to change lanes
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do when driving near animals?

271. What should you do when driving near animals?

Maintain speed if they remain beside the road.
✓ Slow down and be ready to stop.
Flash your headlights repeatedly to warn them.
Sound your horn to make them move away.

Animals can move unpredictably. Slow down, stay alert, and be prepared to stop safely.

Animals near moving road traffic
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do with a manual parking brake before driving away?

272. What should you do with a manual parking brake before driving away?

Pull it up further.
Leave it partly applied.
✓ Release it fully.
Apply it only after moving off.

The manual parking brake should be released fully before driving away. Driving with it partly applied can cause unnecessary brake wear and overheating.

Releasing a manual handbrake before driving away
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this dashboard symbol indicate?

273. What does this dashboard symbol indicate?

✓ Electronic stability control.
Anti-lock braking system.
Low tyre pressure.
Power-steering warning.

This symbol relates to the electronic stability control (ESC) system. It may flash when the system is actively helping to maintain stability. If it remains illuminated, the system may be switched off or have a fault.

Electronic stability control symbol on the dashboard
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What is the purpose of the manual parking brake?

274. What is the purpose of the manual parking brake?

To disengage the clutch.
To select reverse gear.
✓ To help keep the vehicle stationary when parked.
To slow the vehicle during normal driving.

The manual parking brake helps keep the vehicle stationary when parked. It is normally applied by pulling up the handbrake lever and released before driving away.

Manual handbrake lever in a vehicle
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does the ON position of a traditional ignition switch normally do?

275. What does the ON position of a traditional ignition switch normally do?

✓ Switches on the vehicle's electrical systems without operating the starter.
Locks the steering.
Turns the starter motor.
Switches off all electrical accessories.

The ON position normally switches on the vehicle's electrical and ignition systems without operating the starter motor. The engine is started by turning the key further to the START position.

ON position on a traditional ignition switch
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Which control is normally used to operate the direction indicators?

276. Which control is normally used to operate the direction indicators?

The hazard-warning button.
The headlight-level control.
✓ The steering-column indicator stalk.
The windscreen-wiper stalk.

The direction indicators are normally operated using a stalk beside the steering wheel. Moving the stalk up or down activates the indicators on the corresponding side of the vehicle.

Steering-column stalk for the direction indicators
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if your brakes feel less effective after driving through water?

277. What should you do if your brakes feel less effective after driving through water?

✓ Drive carefully and test them gently when safe.
Ignore it if the vehicle still stops.
Use only the parking brake until they dry.
Brake hard several times to dry them quickly.

Water can reduce braking performance. After driving through water, check the brakes gently when it is safe to do so.

Checking braking response after driving through water
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if it is unsafe to leave a stranded vehicle?

278. What should you do if it is unsafe to leave a stranded vehicle?

✓ Stay inside, use hazard lights, and call the emergency services.
Try to push the vehicle out of the traffic lane.
Leave the vehicle and wait beside it for help.
Switch off all lights to preserve the battery.

If leaving the vehicle would put you in greater danger, remain restrained, make the vehicle visible, contact the emergency services, and follow their instructions.

Vehicle stranded among moving traffic
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
How should a motorcyclist brake in an emergency?

279. How should a motorcyclist brake in an emergency?

Grab the front brake as suddenly as possible.
Release both brakes before stopping.
Steer sharply while braking hard.
✓ Apply both brakes firmly and progressively.

During emergency braking, use both brakes firmly and progressively while keeping the motorcycle as upright and stable as practical. Avoid sudden steering. If ABS is fitted, maintain firm braking pressure and allow the system to work.

Motorcyclist making an emergency stop
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does the AUTO setting on the lighting control do?

280. What does the AUTO setting on the lighting control do?

It switches on the front fog lights.
It keeps the main beam switched on.
✓ It switches the headlights on or off automatically when needed.
It switches on the hazard warning lights.

The AUTO lighting setting allows the vehicle to switch its exterior lights on or off automatically according to ambient light conditions. The driver remains responsible for ensuring that the correct lights are being used.

AUTO setting on the vehicle's lighting control
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if you see fallen rocks on a mountain road?

281. What should you do if you see fallen rocks on a mountain road?

✓ Slow down and avoid them smoothly when safe.
Maintain speed and drive over smaller stones.
Move toward the centre of the road without slowing down.
Swerve around them immediately without checking traffic.

Loose rocks can damage tyres, affect steering, or block part of the road. Reduce speed and avoid sudden movements. If rocks are actively falling, do not enter or stop in the danger area. Keep a safe distance and, if necessary, wait in a safe place until it is safe to continue.

Fallen rocks on a mountain road
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does a green traffic light mean?

282. What does a green traffic light mean?

You must proceed as soon as the light turns green.
You may turn in any direction without checking the signs.
✓ You may proceed if it is safe.
You have priority over all other road users.

A green light allows you to continue, but you must still watch for pedestrians, cyclists, and other road users.

Green traffic light at a junction
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
You should check your mirrors before changing lanes.

283. You should check your mirrors before changing lanes.

✓ True.
False.

Checking your mirrors helps you see surrounding traffic before moving into another lane.

Driver checking a mirror before changing lanes
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you leave a much larger following distance on an icy road?

284. Why should you leave a much larger following distance on an icy road?

To make the headlights work more effectively.
To prevent ice from forming on the windscreen.
Because ice increases tyre wear.
✓ Because stopping distances can be much longer.

Tyres have much less grip on ice, so braking takes longer. Extra distance gives you more time to slow down safely.

Following distance between vehicles on an icy road
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this dashboard symbol indicate?

285. What does this dashboard symbol indicate?

✓ Diesel particulate filter warning.
Charging-system warning.
Engine-temperature warning.
Engine-management warning.

This symbol indicates a problem with the diesel particulate filter (DPF), often because soot has accumulated in the filter. The vehicle may require regeneration or professional inspection, depending on the vehicle and warning status.

Diesel particulate filter warning symbol on the dashboard
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you increase your following distance on wet roads?

286. Why should you increase your following distance on wet roads?

Because vehicles ahead have priority in rain.
To reduce road surface damage.
✓ Because braking distances are longer.
Because wet roads make the speedometer less accurate.

Water reduces grip between the tyres and the road, so it takes longer to slow down or stop safely.

Following distance between vehicles on a wet road
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do when reversing with a trailer?

287. What should you do when reversing with a trailer?

✓ Reverse slowly and make small steering corrections.
Watch only the trailer and ignore surrounding traffic.
Ask a guide to stand directly behind the trailer.
Reverse quickly to keep the trailer straight.

Trailers react quickly to steering while reversing. Move slowly, observe carefully, and use a guide only from a safe visible position.

Vehicle reversing with a trailer
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Which vehicle type is mainly associated with driving licence B?

288. Which vehicle type is mainly associated with driving licence B?

✓ Car.
Motorcycle.
Bus.
Moped.

Driving licence B is mainly associated with cars. Category B covers ordinary cars, while category B with Code 96 and category BE allow heavier trailer combinations.

Driving licence card for category B
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do when an automatic vehicle is stationary in D?

289. What should you do when an automatic vehicle is stationary in D?

Select reverse gear.
Press the accelerator lightly.
✓ Keep the brake pedal pressed.
Release the parking brake.

An automatic vehicle may creep forward when D (Drive) is selected, even without pressing the accelerator. Keep the brake pedal pressed while stationary to prevent unintended movement.

Automatic gear selector in Drive and brake-pedal control
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does the single-wipe position of the windscreen-wiper control do?

290. What does the single-wipe position of the windscreen-wiper control do?

Activates the rear wiper.
Runs the wipers continuously.
✓ Operates the windscreen wipers once.
Sprays washer fluid onto the windscreen.

The single-wipe position operates the windscreen wipers for one sweep and then stops. It is useful when only a small amount of water or spray needs to be cleared from the windscreen.

Single-wipe setting on the windscreen-wiper control
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What is the button on a seat-belt buckle used for?

291. What is the button on a seat-belt buckle used for?

To lock the seat in position.
✓ To release the seat belt.
To tighten the shoulder belt.
To adjust the belt height.

Pressing the button on the seat-belt buckle releases the latch so the belt can be unfastened. Keep the seat belt fastened whenever required while the vehicle is moving.

Release button on a seat-belt buckle
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why can temporary road surfaces increase stopping distance?

292. Why can temporary road surfaces increase stopping distance?

Roadworks switch off anti-lock braking.
✓ Loose gravel, mud, or uneven material may reduce tyre grip.
Temporary roads always slope downhill.
Temporary surfaces make the brakes colder.

Temporary surfaces may provide less grip than normal asphalt. Reduce speed and allow more distance for braking.

Loose or uneven road surface through roadworks
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What can happen if you use the brakes continuously on a long descent?

293. What can happen if you use the brakes continuously on a long descent?

The engine may automatically slow the vehicle.
✓ The brakes may overheat and become less effective.
The brakes may become more effective as they heat up.
The brakes will automatically cool while being used.

Continuous braking can cause the brakes to overheat and fade, reducing braking performance. Use a lower gear to help control speed with engine braking.

Vehicle braking during a long descent
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
How should you brake on a slippery road?

294. How should you brake on a slippery road?

Steer sharply while braking to avoid slippery areas.
Apply the brakes suddenly before the tyres lose grip.
Use the parking brake to help slow the vehicle.
✓ Brake gently and progressively.

Sudden braking can cause the wheels to lose grip. Smooth, progressive braking reduces the risk of skidding.

Braking on a slippery road surface
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do before driving if snow or ice covers your vehicle?

295. What should you do before driving if snow or ice covers your vehicle?

Leave snow on the roof if it is firmly packed.
Let the heater clear the ice while you drive.
✓ Clear the windows, mirrors, lights, roof, and number plates.
Clear only the windows and mirrors.

You need a clear view in every direction. Snow or ice left on the roof can also fall or blow onto other road users.

Clearing snow and ice from a vehicle before driving
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why can fog make it difficult to judge the speed of other vehicles?

296. Why can fog make it difficult to judge the speed of other vehicles?

Fog causes vehicles to travel at uneven speeds.
✓ Limited visibility makes distances and movement harder to estimate.
Fog changes the way mirrors show moving vehicles.
Fog makes vehicles appear larger than they are.

Fog reduces visual information, making it harder to judge how far away another vehicle is and how quickly it is approaching.

Other traffic partly obscured by fog
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this vehicle-control symbol indicate?

297. What does this vehicle-control symbol indicate?

Cabin temperature adjustment.
Air recirculation.
Air conditioning.
✓ Airflow direction.

This control selects the direction of the ventilation airflow, such as towards the face, feet or windscreen.

Control for directing cabin ventilation airflow
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if the brakes fade during a long descent?

298. What should you do if the brakes fade during a long descent?

Switch off the engine to help slow the vehicle.
Keep pressing the brakes continuously all the way downhill.
✓ Select a lower gear and stop safely to allow the brakes to cool.
Accelerate between bends to reduce brake use.

Continuous braking can cause overheating and reduced braking performance. A lower gear provides engine braking and reduces demand on the brakes.

Vehicle descending a hill with overheating brakes
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do when approaching a temporary lane closure?

299. What should you do when approaching a temporary lane closure?

Follow construction vehicles through the closed lane.
Merge without checking if traffic is moving slowly.
Reverse back the way you came.
✓ Follow the temporary signs and merge safely when required.

Observe the temporary signs, adjust your speed, and merge safely according to the traffic situation and local rules.

Temporary traffic-lane closure ahead
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if visibility is reduced by fog?

300. What should you do if visibility is reduced by fog?

✓ Slow down and use the correct lights.
Follow the vehicle ahead closely as a guide.
Use hazard lights instead of normal headlights.
Maintain normal speed if the road markings are visible.

Fog makes it harder to see and be seen. Reduce speed, increase following distance, and use the correct lights.

Fog reducing visibility on a road
AI-generated by Traffic-rules.com • WCIT • CC BY-SA