QuizTraffic rulesWallonia

This interesting quiz helps you test your knowledge in a clear and visual way. With easy multiple-choice questions, you can quickly build confidence and learn new facts while keeping it simple, interactive, and fun.


What is the minimum licence for a moped with a design speed over 25 and up to 45 km/h?

201. What is the minimum licence for a moped with a design speed over 25 and up to 45 km/h?

Licence A2.
Licence B.
✓ Licence AM.
Licence A1.

Category AM covers certain two- and three-wheeled mopeds with a maximum design speed above 25 km/h and not exceeding 45 km/h, as well as light quadricycles.

Moped with a design speed up to 45 km/h
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
From what blood alcohol concentration is an ordinary driver in violation in Belgium?

202. From what blood alcohol concentration is an ordinary driver in violation in Belgium?

0.8 g/l or more.
✓ 0.5 g/l or more.
Alcohol is permitted without a limit.
0.2 g/l or more.

For most drivers, the punishable threshold begins at a blood alcohol concentration of 0.5 g/l, equivalent to 0.22 mg/l in exhaled alveolar air.

Alcohol limits for ordinary drivers in Belgium
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this dashboard symbol indicate?

203. What does this dashboard symbol indicate?

ABS fault.
Low tyre pressure.
Brake-system fault.
✓ Brake-pad wear warning.

This symbol indicates that the brake pads may be worn and should be inspected. Continuing to drive with excessively worn brake pads can reduce braking performance and damage other brake components.

Brake-pad wear warning symbol on the dashboard
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you avoid if your vehicle loses grip on a wet road?

204. What should you avoid if your vehicle loses grip on a wet road?

Holding the steering wheel firmly.
Looking ahead and staying alert.
✓ Sudden braking or sharp steering.
Keeping your movements smooth and controlled.

Abrupt inputs can upset the vehicle further. Smooth control gives the tyres a better chance to regain grip.

Vehicle losing grip on a wet road
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Which gear is normally used when moving off from a standstill?

205. Which gear is normally used when moving off from a standstill?

Neutral.
Reverse.
2nd gear.
✓ 1st gear.

1st gear is normally used when moving off from a standstill because it provides the greatest pulling power at low speed.

Manual gear lever and gear-selection pattern
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you not overtake near the top of a hill?

206. Why should you not overtake near the top of a hill?

Hilltops usually have a slippery road surface.
Your engine loses power near the top of a hill.
✓ You may not see oncoming traffic or hidden hazards.
Vehicles ahead always have priority on hills.

Near the top of a hill, your view ahead is limited. Oncoming vehicles, cyclists, pedestrians, or obstacles may be hidden.

Hill crest hiding the road ahead
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does turning a traditional ignition switch to OFF normally do?

207. What does turning a traditional ignition switch to OFF normally do?

Selects accessory power.
✓ Switches off the engine and ignition systems.
Releases the parking brake.
Operates the starter motor.

Turning a traditional ignition switch to OFF switches off the engine and ignition systems. The key can then normally be moved to the LOCK position and removed.

OFF position on a traditional ignition switch
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should cyclists do after a collision or hard fall?

208. What should cyclists do after a collision or hard fall?

Continue if you feel fine and the bicycle looks normal.
✓ Check yourself and inspect the bicycle before riding again.
Check only the parts that were directly involved in the fall.
Test the bicycle by riding it before checking for damage.

A fall can damage the brakes, wheels, frame, handlebars, or helmet. Injuries may also not be immediately obvious.

Checking a bicycle after a fall or collision
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Which vehicle combination is covered by driving licence DE?

209. Which vehicle combination is covered by driving licence DE?

A category D1 vehicle without a trailer.
A category C vehicle with a heavy trailer.
A category B vehicle with a small trailer.
✓ A category D vehicle with a trailer over 750 kg.

Category DE covers combinations consisting of a category D towing vehicle and a trailer with a maximum authorised mass above 750 kg.

Bus and trailer covered by category DE
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this vehicle-control symbol indicate?

210. What does this vehicle-control symbol indicate?

✓ Headlight level adjustment.
Instrument-panel brightness.
Main beam.
Automatic headlights.

This control adjusts the vertical aim of the headlights. It can be used to lower the beam when the vehicle is heavily loaded, helping to avoid dazzling other road users.

Control for adjusting the headlight beam height
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this dashboard symbol indicate?

211. What does this dashboard symbol indicate?

Windscreen washer.
Air conditioning.
✓ Rear window demister.
Front windscreen demister.

This symbol indicates the rear window demister. It heats the rear window to help clear condensation, mist or frost and improve visibility.

Rear-window demister symbol on the dashboard
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this vehicle-control symbol indicate?

212. What does this vehicle-control symbol indicate?

✓ Driving mode selection.
Four-wheel drive.
Parking assistance.
Cruise control.

This control selects a driving mode. Depending on the vehicle, different modes can alter characteristics such as accelerator response, steering assistance, transmission behaviour or energy use.

Selector for the vehicle's driving modes
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you make sure drivers have seen you before crossing?

213. Why should you make sure drivers have seen you before crossing?

Once a driver sees you, no further checks are needed.
A driver who sees you can always stop in time.
✓ To reduce the risk of stepping into their path.
Eye contact means the driver must stop for you.

Before crossing, make sure approaching drivers have noticed you and that it is safe to proceed. Do not assume that a driver will stop simply because you have seen each other.

Pedestrian checking whether an approaching driver has seen them
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if you smell fuel or see fuel leaking from your vehicle?

214. What should you do if you smell fuel or see fuel leaking from your vehicle?

Drive slowly to the nearest fuel station.
✓ Stop, switch off the engine, avoid flames or sparks, and call for assistance.
Restart the engine to check whether the leak continues.
Wash the leaking fuel away with water.

Leaking fuel creates a serious fire risk. Keep people away, do not restart the engine, and arrange professional assistance.

Fuel leaking from a vehicle
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
May a cyclist younger than 10 ride on the pavement in Belgium?

215. May a cyclist younger than 10 ride on the pavement in Belgium?

Only when accompanied by an adult.
✓ Yes, in all circumstances.
No, never.
Only outside built-up areas.

Cyclists younger than 10 may use pavements and raised verges in all circumstances.

Young child riding a bicycle on the pavement
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if your vehicle breaks down on a busy road?

216. What should you do if your vehicle breaks down on a busy road?

✓ Move to a safe place, use hazard lights, and stay clear of traffic.
Sound the horn continuously to warn other drivers.
Stand beside the vehicle while waiting for help.
Remain in the traffic lane even if you can move to safety.

If your vehicle breaks down, make it visible and get yourself away from moving traffic. Safety comes before repairing the vehicle.

Broken-down vehicle beside a busy road
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do when approaching a temporary lane closure?

217. What should you do when approaching a temporary lane closure?

✓ Follow the temporary signs and merge safely when required.
Ignore the temporary signs if your lane is still open.
Merge without checking if traffic is moving slowly.
Reverse back the way you came.

Observe the temporary signs, adjust your speed, and merge safely according to the traffic situation and local rules.

Temporary traffic-lane closure ahead
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
When may you normally use the horn in Belgium?

218. When may you normally use the horn in Belgium?

Whenever traffic is moving slowly.
To greet someone beside the road.
Whenever entering a built-up area.
✓ To give a necessary warning to prevent an accident.

Horn signals must be as brief as possible and are permitted only as a necessary warning to prevent an accident. Outside built-up areas, they may also be used when necessary to warn a driver being overtaken.

Driver using the horn to warn other road users
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you leave extra space when following a large vehicle?

219. Why should you leave extra space when following a large vehicle?

To prevent the large vehicle from changing lanes.
To reduce the amount of fuel your vehicle uses.
To make overtaking possible without checking ahead.
✓ To improve your view ahead and give yourself more time to react.

A large vehicle can block your view of traffic, signs, junctions, or hazards ahead. Leaving extra space improves your view and gives you more time to react if traffic slows or a hazard develops.

Large vehicle limiting a following driver's view
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
When should you merge if your lane ends during heavily congested traffic?

220. When should you merge if your lane ends during heavily congested traffic?

Only after driving through the closed section.
At any point without using an indicator.
After stopping beside the final cone.
✓ Immediately before the narrowing, taking turns with traffic in the open lane.

During heavily slowed traffic, Belgian zipper-merging rules require drivers to use the ending lane until just before the narrowing. Drivers in the continuing lane must then allow one vehicle to merge alternately.

Vehicles taking turns to merge at a lane narrowing
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What must you do before using a rear-facing child seat in front of an airbag?

221. What must you do before using a rear-facing child seat in front of an airbag?

Fasten the adult seat belt behind the seat.
Leave the airbag active for extra protection.
Turn the child seat to face forward.
✓ Make sure the airbag is deactivated.

A rear-facing child-restraint system must not be used in front of an active frontal airbag. The airbag must be switched off or disabled automatically.

Rear-facing child seat and front passenger airbag control
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Which signs may indicate that you are becoming too tired to drive safely?

222. Which signs may indicate that you are becoming too tired to drive safely?

Feeling hungry and slightly thirsty.
✓ Yawning, heavy eyelids, and difficulty concentrating.
Listening to quieter music.
Feeling comfortable and relaxed.

Warning signs of driver fatigue can include repeated yawning, heavy eyelids, difficulty concentrating, wandering thoughts, and trouble maintaining a steady road position. These signs mean you should stop and rest before continuing.

Driver showing signs of fatigue
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this vehicle-control button operate?

223. What does this vehicle-control button operate?

✓ The engine or drive system.
The automatic start-stop system.
The parking brake.
The hazard warning lights.

The engine start/stop button is used to start or switch off the vehicle's engine or electric drive system. Starting the vehicle normally also requires the brake or clutch pedal to be pressed.

Engine start/stop button in a vehicle
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this vehicle-control symbol indicate?

224. What does this vehicle-control symbol indicate?

✓ Speed limiter.
Adaptive cruise control.
Cruise control.
Electronic stability control.

The speed limiter allows the driver to set a maximum speed that the vehicle should not normally exceed while the accelerator is being used.

Vehicle speed-limiter control and symbol
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this dashboard symbol indicate?

225. What does this dashboard symbol indicate?

Low coolant level.
Engine-temperature warning.
Charging-system warning.
✓ Low engine oil level.

This symbol indicates that the engine oil level is low. Check the oil level according to the manufacturer's instructions and add the correct oil if necessary.

Low oil-level warning symbol on the dashboard
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if an overtaking vehicle is coming toward you?

226. What should you do if an overtaking vehicle is coming toward you?

Maintain your speed and expect the other driver to return to their lane.
Accelerate to pass the danger point more quickly.
✓ Slow down and move slightly aside if safe.
Brake sharply as soon as the vehicle enters your lane.

If an oncoming vehicle creates danger while overtaking, reduce speed and make space if it is safe to do so. Avoid sudden movements that could create an additional hazard.

Oncoming vehicle overtaking into the driver's lane
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do when temporary traffic lights show red?

227. What should you do when temporary traffic lights show red?

✓ Stop before the signal or temporary stop line.
Continue if the road ahead appears clear.
Follow the vehicle ahead through the signal.
Proceed if no road workers are visible.

Temporary traffic signals must be obeyed like permanent signals. Stop and wait until you are permitted to continue.

Red signal on temporary roadworks traffic lights
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this dashboard symbol indicate?

228. What does this dashboard symbol indicate?

Low engine oil.
Low washer fluid.
Low tyre pressure.
✓ Low engine coolant level.

This symbol indicates that the engine coolant level is low. Check the coolant level when the engine is cool and refill it with the correct coolant if necessary.

Low coolant-level warning symbol on the dashboard
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if you have taken drugs that may impair your driving?

229. What should you do if you have taken drugs that may impair your driving?

Wait until you feel more confident.
Drive slowly and avoid motorways.
Drink coffee before driving.
✓ Do not drive.

Drugs can impair judgement, coordination, concentration, and reaction time. Their effects can be unpredictable and may continue after you feel that the main effects have passed. Do not drive while impaired.

Drug impairment and the decision not to drive
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What is the main risk when following a vehicle with limited rear visibility?

230. What is the main risk when following a vehicle with limited rear visibility?

The vehicle must always travel more slowly.
✓ The driver may not see you clearly.
The vehicle has priority when changing lanes.
The driver cannot use the side mirrors.

Vans, trucks, and vehicles with blocked rear windows may have limited visibility. Keep extra distance and avoid sitting in blind spots.

Vehicle with limited rearward visibility
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What is the general minimum legal tread depth for car tyres in Wallonia?

231. What is the general minimum legal tread depth for car tyres in Wallonia?

✓ 1.6 mm.
1.0 mm.
1.5 mm.
2.0 mm.

The general minimum legal tread depth for car tyres in Wallonia is 1.6 mm. Higher minimums may apply to winter tyres, during winter periods or in winter conditions.

Measuring tread depth on a vehicle tyre
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you check before starting a manual vehicle?

232. What should you check before starting a manual vehicle?

That reverse gear is selected.
That the parking brake is released.
That first gear is selected and the accelerator is pressed.
✓ That the gearbox is in neutral and the clutch is pressed.

Before starting a manual vehicle, make sure the gearbox is in neutral and press the clutch pedal. This helps prevent the vehicle from moving unexpectedly when the engine starts.

Clutch and gear checks before starting a manual vehicle
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
When must you use an indicator at a Belgian roundabout?

233. When must you use an indicator at a Belgian roundabout?

✓ When leaving the roundabout.
Both when entering and leaving in every case.
Only when entering the roundabout.
Indicators are not used at roundabouts.

Using an indicator is not required merely to enter a roundabout. Leaving the roundabout is a change of direction and must be indicated.

Vehicle signalling as it leaves a roundabout
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if you realise you have put the wrong fuel in your vehicle?

234. What should you do if you realise you have put the wrong fuel in your vehicle?

Add the correct fuel and continue driving.
Rev the engine briefly to mix the fuels.
✓ Do not start the engine, and seek assistance.
Start the engine and drive slowly to use the fuel.

If you have used the wrong fuel, do not start the engine. Starting it can circulate the incorrect fuel and cause further damage. If possible, avoid switching on the ignition and seek appropriate roadside or workshop assistance.

Fuel nozzle and the risk of misfuelling
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Who normally has priority at an unsigned intersection in Belgium?

235. Who normally has priority at an unsigned intersection in Belgium?

The driver travelling fastest.
✓ The driver approaching from the right.
The largest vehicle.
The driver approaching from the left.

Belgium generally applies priority from the right at unsigned intersections. Signs, roundabout rules, and certain other situations can create exceptions.

Vehicles approaching an unsigned junction
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should a designated driver do?

236. What should a designated driver do?

✓ Remain alcohol-free for the entire journey.
Drink only low-alcohol drinks.
Do not carry passengers who have been drinking.
Drink only a small amount with food.

A designated driver should remain sober so they can drive safely and respond properly to traffic conditions.

Alcohol-free designated driver for a journey
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does the ON position of a traditional ignition switch normally do?

237. What does the ON position of a traditional ignition switch normally do?

Turns the starter motor.
✓ Switches on the vehicle's electrical systems without operating the starter.
Switches off all electrical accessories.
Locks the steering.

The ON position normally switches on the vehicle's electrical and ignition systems without operating the starter motor. The engine is started by turning the key further to the START position.

ON position on a traditional ignition switch
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Can you assume that you are safe to drive the morning after drinking?

238. Can you assume that you are safe to drive the morning after drinking?

✓ No, alcohol may still remain in your body.
Yes, if you eat breakfast before driving.
Yes, sleep removes all alcohol from your body.
Yes, if you feel completely sober.

The body needs time to process alcohol. Sleeping, eating, showering, or drinking coffee does not instantly remove it.

Fitness to drive the morning after drinking
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if the accelerator becomes stuck while you are driving?

239. What should you do if the accelerator becomes stuck while you are driving?

Press the accelerator harder to try to free it.
Apply the parking brake sharply while moving.
✓ Select neutral, brake firmly, and steer to a safe stopping place.
Keep driving and wait for the accelerator to release.

Selecting neutral disconnects engine power from the wheels. Brake firmly, maintain steering control, and switch off the engine after stopping safely.

Stuck accelerator pedal in a vehicle
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this dashboard symbol indicate?

240. What does this dashboard symbol indicate?

Dipped headlights.
Main beam.
Sidelights.
✓ Rear fog lights.

This symbol indicates that the rear fog lights are switched on. Rear fog lights make the vehicle more visible from behind in conditions of severely reduced visibility, but they can dazzle other road users when used unnecessarily.

Rear fog-light symbol on the dashboard
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do after hitting a deep pothole hard?

241. What should you do after hitting a deep pothole hard?

Brake sharply to check whether the wheels are damaged.
✓ Check for tyre or wheel damage when it is safe to stop.
Continue driving normally if the tyre still looks inflated.
Increase speed to see whether the steering remains stable.

A hard impact with a pothole can damage tyres, wheel rims, steering, suspension, or wheel alignment. When it is safe to stop, inspect the tyres and wheels and pay attention to unusual vibration, pulling, or steering changes. Have the vehicle checked if you suspect damage.

Checking a tyre and wheel after hitting a pothole
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
When should you select R (Reverse) in an automatic vehicle?

242. When should you select R (Reverse) in an automatic vehicle?

✓ After the vehicle has come to a complete stop.
While the vehicle is still moving forward slowly.
Before pressing the brake pedal.
Whenever you want to reduce speed.

Select R (Reverse) only after the vehicle has come to a complete stop. Selecting Reverse while the vehicle is still moving forward can damage the transmission.

Selecting Reverse in a stationary automatic vehicle
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you avoid wearing dark clothing at night?

243. Why should you avoid wearing dark clothing at night?

Street lighting makes dark clothing easy to see.
Dark clothing reflects more light from vehicles.
✓ Drivers may have difficulty seeing you.
Clothing colour matters only on unlit roads.

Dark clothing makes pedestrians harder to see in low-light conditions. Bright or reflective clothing improves visibility.

Pedestrian wearing dark clothing at night
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this dashboard symbol indicate?

244. What does this dashboard symbol indicate?

Brake-system warning.
Charging-system warning.
Power-steering warning.
✓ Airbag system warning.

This symbol indicates a possible fault in the airbag or supplementary restraint system. If it remains illuminated while driving, the system should be checked because one or more airbags or seat-belt pretensioners may not operate correctly in a collision.

Airbag-system warning symbol on the dashboard
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What do the + and − controls normally adjust when the speed limiter is active?

245. What do the + and − controls normally adjust when the speed limiter is active?

✓ The selected maximum speed.
The engine idle speed.
The transmission gear.
The following distance.

When the speed limiter is active, the + and − controls normally increase or decrease the selected maximum speed. The exact adjustment steps can vary between vehicles.

Plus and minus controls for the speed limiter
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this dashboard symbol indicate?

246. What does this dashboard symbol indicate?

Low tyre pressure.
✓ Parking brake applied.
Brake pads worn.
Power-steering fault.

This symbol indicates that the parking brake is applied. It should normally go out when the parking brake is fully released.

Parking-brake indicator symbol on the dashboard
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do before overtaking while towing a trailer?

247. What should you do before overtaking while towing a trailer?

✓ Allow extra time and distance for the manoeuvre.
Begin overtaking as soon as the road looks clear.
Assume the trailer will follow the same path as the vehicle.
Follow closely before moving out to overtake.

A towing vehicle accelerates more slowly, and the trailer makes the whole vehicle combination longer. Remember to allow a much larger safe gap before overtaking and enough space to return safely to your lane.

Vehicle preparing to overtake while towing a trailer
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
When can you take the Belgian category AM theory test?

248. When can you take the Belgian category AM theory test?

At 17 years.
Three months before turning 18.
At 18 years.
✓ Three months before turning 16.

The theory test for driving licence AM may be taken from three months before the age of 16. The licence itself may be obtained from the age of 16.

Minimum age for the Belgian category AM theory test
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do when passing a horse rider?

249. What should you do when passing a horse rider?

Pass closely to reduce the time beside the horse.
Accelerate while passing to get past quickly.
Flash your headlights before moving alongside.
✓ Slow down and give plenty of space.

Horses can be startled by noise or sudden movement. Slow down, pass carefully, and leave enough space.

Vehicle passing a horse and rider
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why is high-visibility clothing useful during a roadside breakdown?

250. Why is high-visibility clothing useful during a roadside breakdown?

It makes hazard warning lights unnecessary.
It protects you from injury if a vehicle hits you.
✓ It makes you easier for approaching drivers and recovery workers to see.
It allows you to remain close to moving traffic.

High-visibility clothing improves your visibility, especially at night or in poor weather, but you must still remain away from traffic.

High-visibility clothing worn during a roadside breakdown
AI-generated by Traffic-rules.com • WCIT • CC BY-SA