QuizTraffic rulesBrussels

Test your knowledge with our multiple-choice quiz. Learn from each answer and improve your understanding of the traffic rules and road signs of Brussels.

For informational purposes only. Always follow official regulations. Some content and images were created with AI assistance.


Why should you use headlights in poor visibility?

401. Why should you use headlights in poor visibility?

✓ To see better and be seen by others.
To reduce fuel consumption.
To prevent the tyres from slipping.
To keep the windscreen clear.

Headlights help you see the road and make your vehicle more visible to other road users in fog, rain, darkness, or poor weather.

Vehicle using headlights in reduced visibility
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if traffic stops inside a tunnel?

402. What should you do if traffic stops inside a tunnel?

Drive onto the pedestrian walkway.
Sound the horn continuously until traffic moves.
Make a U-turn and leave the tunnel.
✓ Stop at a safe distance and follow signals or instructions.

Remain calm, keep space from the vehicle ahead, and obey traffic signals, signs, or instructions from tunnel staff.

Traffic stopped inside a road tunnel
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What is the purpose of a pedestrian crossing?

403. What is the purpose of a pedestrian crossing?

To give pedestrians priority throughout the whole street.
✓ To help pedestrians cross the road safely.
To separate pedestrians from cyclists along the road.
To provide a place where vehicles may stop temporarily.

Pedestrian crossings provide a designated place where people can safely cross the road.

Pedestrian crossing across a road
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What is the minimum licence for a car with a maximum authorised mass of 3,500 kg?

404. What is the minimum licence for a car with a maximum authorised mass of 3,500 kg?

Licence D1.
Licence C1.
Licence C.
✓ Licence B.

Category B normally covers motor vehicles with a maximum authorised mass not exceeding 3,500 kg and designed to carry no more than eight passengers in addition to the driver.

Car with a maximum authorised mass of 3,500 kg
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this dashboard symbol indicate?

405. What does this dashboard symbol indicate?

Front fog lights.
Rear fog lights.
Sidelights.
✓ Dipped headlights.

This symbol indicates that the dipped headlights are switched on. Dipped headlights illuminate the road ahead while limiting glare for other road users.

Dipped-headlight symbol on the dashboard
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if you feel tired while driving?

406. What should you do if you feel tired while driving?

✓ Stop in a safe place and take a break.
Drink coffee and continue without stopping.
Drive faster to reach your destination sooner.
Open a window and continue driving.

Driving while tired reduces concentration and reaction time. Stop somewhere safe and rest before continuing.

Tired driver taking a break from a journey
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
You should stay focused on the road and avoid unnecessary distractions.

407. You should stay focused on the road and avoid unnecessary distractions.

✓ True.
False.

Distractions reduce awareness and reaction time, making driving more dangerous.

Driver keeping attention on the road ahead
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you avoid parking a petrol or diesel vehicle on dry grass?

408. Why should you avoid parking a petrol or diesel vehicle on dry grass?

✓ Hot exhaust components could ignite the vegetation.
The tyres could lose pressure more quickly.
The grass could prevent the parking brake from holding.
The grass could block the vehicle's ventilation system.

Parts of the exhaust system, especially the catalytic converter, can become very hot while driving. Parking over dry grass, leaves, or other combustible vegetation can create a fire risk. Park on a suitable non-flammable surface whenever possible.

Vehicle exhaust close to dry grass
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Which pedal is used to slow down or stop the vehicle?

409. Which pedal is used to slow down or stop the vehicle?

✓ The brake pedal.
The clutch pedal.
The accelerator pedal.
The footrest.

The brake pedal is used to reduce the vehicle's speed or bring it to a stop. In a manual vehicle, it is the middle pedal.

Brake pedal in the driver's footwell
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do before attempting to jump-start a vehicle?

410. What should you do before attempting to jump-start a vehicle?

✓ Check the owner's manual and make sure the connections are compatible.
Ignore battery damage if the terminals look clean.
Start both vehicles before connecting the leads.
Use any battery that physically fits the vehicle.

Incorrect jump-starting can damage electrical systems, cause sparks, or make a battery explode. Connect the leads in the correct order before starting the vehicles, and follow the manufacturer's procedure exactly.

Preparing to jump-start a vehicle battery
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do with the steering wheel after completing a turn?

411. What should you do with the steering wheel after completing a turn?

✓ Guide it smoothly back towards the straight-ahead position.
Turn it quickly in the opposite direction.
Hold it in the turned position.
Release it completely and let it spin freely.

After completing a turn, guide the steering wheel smoothly back towards the straight-ahead position while maintaining control. Do not allow the wheel to spin freely through your hands.

Guiding the steering wheel back after a turn
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
How should luggage or other cargo be carried in or on a vehicle?

412. How should luggage or other cargo be carried in or on a vehicle?

Loosely in the boot so it can move a little.
✓ Securely, within load limits, without blocking visibility or lights.
Anywhere, as long as the vehicle is not overloaded.
Where it is easiest to reach while driving.

Unsecured or overloaded cargo can affect steering and braking, injure occupants during sudden stops, or fall into the road. It must not obstruct the driver's view or vehicle lights.

Luggage and cargo carried in a vehicle
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should a motorcyclist do before entering a bend?

413. What should a motorcyclist do before entering a bend?

✓ Reduce speed before the bend and look through it.
Move close to the centre of the road.
Look only at the road directly in front of the wheel.
Brake hard after beginning to lean.

Adjust your speed before entering the bend so you can steer smoothly and remain within a safe position. Look through the bend towards where you want to travel and be prepared for hazards that may be hidden from view.

Motorcyclist approaching a bend
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What is the main risk when following a vehicle with limited rear visibility?

414. What is the main risk when following a vehicle with limited rear visibility?

The vehicle has priority when changing lanes.
✓ The driver may not see you clearly.
The vehicle must always travel more slowly.
The driver can see you better if you follow closely.

Vans, trucks, and vehicles with blocked rear windows may have limited visibility. Keep extra distance and avoid sitting in blind spots.

Vehicle with limited rearward visibility
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
How should you normally apply the brake pedal for a smooth stop?

415. How should you normally apply the brake pedal for a smooth stop?

Press it as hard as possible immediately.
Use the parking brake instead.
✓ Apply pressure progressively.
Pump the pedal repeatedly.

For normal braking, apply the brake pedal progressively and smoothly. As the vehicle comes to a stop, easing the pressure slightly can help avoid a sudden jerk.

Progressive brake-pedal pressure for a smooth stop
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you keep your windscreen clean?

416. Why should you keep your windscreen clean?

To prevent windscreen damage.
To reduce fuel consumption.
✓ To see the road clearly.
To improve engine cooling.

A clean windscreen gives you a clear view of the road, signs, pedestrians, cyclists, and other vehicles.

Cleaning a windscreen to improve the driver's view
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you avoid resting your foot on the clutch pedal while driving?

417. Why should you avoid resting your foot on the clutch pedal while driving?

✓ It can cause unnecessary clutch wear.
It can increase tyre pressure.
It can apply the parking brake.
It can lock the steering.

Resting your foot on the clutch pedal can apply slight pressure to the clutch mechanism and cause unnecessary wear. Keep your left foot off the clutch when it is not needed.

Foot position near the clutch pedal
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Which licence category is mainly associated with buses?

418. Which licence category is mainly associated with buses?

✓ Licence D.
Licence A.
Licence AM.
Licence C.

Driving licence D is mainly associated with buses. Category D1 covers smaller buses, D covers larger buses, and D1E and DE allow heavier trailers.

Bus and category D driving licence
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this dashboard symbol indicate?

419. What does this dashboard symbol indicate?

Charging-system warning.
✓ Engine-temperature warning.
Low washer fluid.
Oil-pressure warning.

This symbol indicates that the engine coolant temperature is too high. If it illuminates while driving, stop safely and allow the engine to cool before investigating the cause.

Engine-temperature warning symbol on the dashboard
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why must you take wider turns when towing a trailer?

420. Why must you take wider turns when towing a trailer?

✓ The trailer follows a tighter path than the towing vehicle.
Wider turns decrease tyre wear.
Wide turns prevent the trailer from swaying.
The trailer always follows the same path as the towing vehicle.

Trailer wheels cut closer to the inside of a turn. Allow enough clearance from kerbs, signs, pedestrians, and other vehicles.

Towing vehicle and trailer negotiating a turn
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if traffic suddenly slows on a motorway?

421. What should you do if traffic suddenly slows on a motorway?

Change lanes immediately to avoid slowing down.
Move onto the shoulder and continue driving.
Maintain speed until the vehicle ahead brakes.
✓ Slow down smoothly and warn traffic behind if needed.

When traffic slows suddenly, reduce speed smoothly, keep a safe distance, and use hazard lights if needed to warn following traffic.

Motorway traffic slowing ahead
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Rain can reduce tyre grip and increase stopping distance.

422. Rain can reduce tyre grip and increase stopping distance.

False.
✓ True.

Wet roads reduce traction, so your vehicle may need more distance to stop safely.

Vehicle travelling on a wet road
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if you see fallen rocks on a mountain road?

423. What should you do if you see fallen rocks on a mountain road?

Swerve around them immediately without checking traffic.
✓ Slow down and avoid them smoothly when safe.
Move toward the centre of the road without slowing down.
Maintain speed and drive over smaller stones.

Loose rocks can damage tyres, affect steering, or block part of the road. Reduce speed and avoid sudden movements. If rocks are actively falling, do not enter or stop in the danger area. Keep a safe distance and, if necessary, wait in a safe place until it is safe to continue.

Fallen rocks on a mountain road
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if the service brakes fail while driving?

424. What should you do if the service brakes fail while driving?

Apply the parking brake suddenly at full force.
✓ Reduce speed using other available braking methods and stop safely.
Switch off the engine immediately while moving.
Continue slowly until the brakes begin working again.

Remain calm, warn other road users, and use other available braking methods to reduce speed. This may include engine braking or a lower gear, and careful use of the parking or emergency brake according to the vehicle's design. Steer toward the safest available stopping area.

Vehicle braking-system failure while driving
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if traffic ahead is blocking a junction?

425. What should you do if traffic ahead is blocking a junction?

Enter the junction and wait for traffic to move.
Enter if the traffic light is green.
✓ Wait until there is enough space to clear the junction.
Follow the vehicle ahead into the junction.

Do not enter a junction if traffic ahead prevents you from clearing it safely. Waiting before the junction helps avoid blocking crossing traffic, pedestrians, cyclists, or other road users.

Queue of traffic blocking a junction
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you check before towing a trailer?

426. What should you check before towing a trailer?

Check the lights after you have started driving.
✓ The coupling, safety connections, lights, tyres, and load.
Check only that the trailer is securely coupled.
Secure the load only if it is heavy.

The trailer must be correctly connected and roadworthy. Its lights, tyres, safety connections, and load should all be checked.

Checking a trailer before towing
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if another vehicle is tailgating you?

427. What should you do if another vehicle is tailgating you?

Speed up to create more space behind you.
Move toward the centre to discourage them from passing.
✓ Stay calm and increase your safety margin ahead.
Tap the brakes to make them increase their distance.

If someone follows too closely, avoid sudden actions. Keeping more space in front gives you more time to brake gently if needed. If it is safe, allow the tailgating vehicle to pass.

Following vehicle visible close behind
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
When must rear fog lights be used in Belgium?

428. When must rear fog lights be used in Belgium?

Only on motorways.
During every rain shower.
Whenever another vehicle follows closely.
✓ In fog or snow with visibility below about 100 metres, and during heavy rain.

Rear fog lights must be used in fog or snowfall that reduces visibility below about 100 metres and also during heavy rain. They may not be used in other conditions.

Vehicle using rear fog lights in poor visibility
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Who should always wear a seat belt?

429. Who should always wear a seat belt?

Only people in the front seats.
✓ Everyone in the vehicle.
Only the driver.
Only children and young passengers.

Seat belts greatly reduce the risk of serious injury in a crash and should be worn by everyone in the vehicle.

Vehicle occupants wearing seat belts
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this dashboard symbol indicate?

430. What does this dashboard symbol indicate?

Low coolant level.
Low tyre pressure.
✓ Low windscreen washer fluid.
Windscreen demister active.

This symbol indicates that the windscreen washer fluid level is low. Refill the washer-fluid reservoir with suitable fluid when possible.

Low washer-fluid warning symbol on the dashboard
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do when your view is blocked at a junction?

431. What should you do when your view is blocked at a junction?

✓ Slow down and proceed carefully.
Look only in the direction traffic normally comes from.
Drive through quickly before other traffic appears.
Follow the vehicle ahead without checking yourself.

If your view is blocked, slow down and make sure the way is clear before entering the junction.

Restricted view of approaching traffic at a junction
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if the windscreen becomes damaged while driving?

432. What should you do if the windscreen becomes damaged while driving?

Continue driving if you can still see part of the road.
✓ Reduce speed and stop safely if your view is affected.
Rely on the mirrors instead of the windscreen.
Drive faster to reach a safe place sooner.

Severe damage can obstruct your view and weaken the glass. Do not continue if you cannot see the road clearly.

Damaged windscreen affecting the driver's view
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What can happen if you use the brakes continuously on a long descent?

433. What can happen if you use the brakes continuously on a long descent?

✓ The brakes may overheat and become less effective.
The brakes will automatically cool while being used.
The brakes may become more effective as they heat up.
The engine may automatically slow the vehicle.

Continuous braking can cause the brakes to overheat and fade, reducing braking performance. Use a lower gear to help control speed with engine braking.

Vehicle braking during a long descent
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do at a railway crossing when the barriers are closing?

434. What should you do at a railway crossing when the barriers are closing?

✓ Stop and wait until the barriers are completely open.
Continue if the barriers are not fully closed.
Follow the vehicle ahead across the tracks.
Cross quickly if you cannot see a train.

Never enter a railway crossing when barriers are closing or warning signals are active. Stop and wait until it is safe.

Barriers closing at a railway crossing
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this vehicle-control symbol indicate?

435. What does this vehicle-control symbol indicate?

Adaptive cruise control.
Cruise control.
✓ Speed limiter.
Electronic stability control.

The speed limiter allows the driver to set a maximum speed that the vehicle should not normally exceed while the accelerator is being used.

Vehicle speed-limiter control and symbol
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you remember when using driver-assistance systems?

436. What should you remember when using driver-assistance systems?

You may stop watching the road when they are active.
You only need to intervene when a warning appears.
✓ You remain responsible and must stay alert.
The systems can take full responsibility for driving.

Driver-assistance systems can help with tasks such as maintaining speed, monitoring lanes, or warning about hazards, but they do not replace the driver. Stay attentive, monitor the road and traffic, and be ready to take control whenever necessary.

Driver monitoring the road while using driver assistance
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What must a driver do at an uncontrolled pedestrian crossing?

437. What must a driver do at an uncontrolled pedestrian crossing?

Sound the horn and maintain speed.
Give way only to children.
Stop only when another vehicle has stopped.
✓ Give way to pedestrians on it or about to step onto it.

Drivers must approach at a moderate speed and give way to pedestrians who are crossing or are about to enter the crossing.

Pedestrians at a crossing without traffic signals
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you reduce speed when approaching roadworks?

438. Why should you reduce speed when approaching roadworks?

You should not reduce speed near roadworks.
To reduce exhaust gases near construction sites.
✓ Road workers, narrow lanes, and unexpected hazards may be present.
To keep construction dust off the windscreen.

Roadworks can involve workers, machinery, changing lane layouts, and uneven surfaces. Lower speed gives you more time to react.

Vehicle approaching a roadworks area
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if an emergency vehicle approaches with lights or siren on?

439. What should you do if an emergency vehicle approaches with lights or siren on?

✓ Stay calm and make room safely.
Move aside without checking surrounding traffic.
Stop immediately wherever you are.
Speed up so the vehicle can follow you.

When an emergency vehicle uses lights or siren, check your surroundings and make room safely without sudden or dangerous movements.

Emergency vehicle approaching with warning lights flashing
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if EV charging equipment becomes unusually hot or smells burnt?

440. What should you do if EV charging equipment becomes unusually hot or smells burnt?

✓ Stop the charging session, keep clear, and report the fault.
Keep charging until the vehicle reaches full charge.
Continue charging at a lower power setting.
Pour water over the equipment to cool it.

Unusual heat, a burning smell, smoke, sparks, or repeated charging faults can indicate an electrical problem. Stop using the charging equipment if it is safe to do so, keep clear of anything damaged or overheating, and report the fault or seek appropriate assistance.

Faulty electric-vehicle charging equipment
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What colour is normally used for the centre line separating opposing traffic in Brussels?

441. What colour is normally used for the centre line separating opposing traffic in Brussels?

Yellow.
✓ White.

Roads in Brussels normally use a white centre line to separate traffic travelling in opposite directions.

Centre-line markings separating opposing traffic
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you take regular breaks during a long journey?

442. Why should you take regular breaks during a long journey?

To improve fuel quality.
To allow the engine to cool down.
✓ To help prevent fatigue and maintain concentration.
To make the journey feel shorter.

Regular breaks during a long journey help reduce fatigue and maintain concentration. Do not wait until you are struggling to stay awake before stopping to rest.

Driver resting during a long journey
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should a motorcyclist avoid riding in another vehicle's blind spot?

443. Why should a motorcyclist avoid riding in another vehicle's blind spot?

The motorcycle's brakes may become less effective.
The vehicle ahead must always change lanes.
✓ The driver may not be able to see the motorcycle.
The motorcycle will use more fuel.

Motorcycles can be difficult to see, particularly when they remain in another vehicle's blind spot. Avoid staying alongside a vehicle where the driver may not see you, and choose a position where you are more likely to be visible.

Motorcycle in another vehicle's blind spot
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do when approaching a stop sign?

444. What should you do when approaching a stop sign?

✓ Come to a complete stop before proceeding.
Stop only after entering the junction.
Proceed if the vehicle ahead has already stopped.
Slow down and stop only if traffic is approaching.

A stop sign requires you to come to a complete stop at the required position. Check carefully for other road users and proceed only when it is safe.

Vehicle approaching a stop sign
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should loose clothing be avoided when riding a motorcycle?

445. Why should loose clothing be avoided when riding a motorcycle?

It can reduce the pressure in the tyres.
It can make the brakes overheat.
It can prevent the engine from cooling properly.
✓ It can become caught in moving parts or distract the rider.

Loose clothing, straps or scarves can flap in the wind or become caught in moving parts such as the chain or wheel. Motorcycle clothing should fit securely and should not have loose items that could interfere with safe riding.

Motorcyclist wearing loose clothing
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you avoid stopping in a blind spot of a large vehicle?

446. Why should you avoid stopping in a blind spot of a large vehicle?

Blind spots only matter when a vehicle is reversing.
✓ The driver may not be able to see you.
Large vehicles always have priority when changing lanes.
Stopping beside a large vehicle makes you easier to see.

Large vehicles have bigger blind spots. If you stop where the driver cannot see you, you may be at risk when the vehicle moves or turns.

Vehicle positioned in a large vehicle's blind spot
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if you approach slow-moving farm machinery?

447. What should you do if you approach slow-moving farm machinery?

Use your horn so the driver moves aside.
Overtake even if the vehicle is signalling to turn.
Drive close behind until there is room to pass.
✓ Keep a safe distance and overtake only when safe.

Farm machinery may be wide, slow, or turn unexpectedly. Keep distance and only overtake when you have a clear view and enough space.

Vehicle approaching slow-moving farm machinery
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you avoid selecting N while driving downhill in an automatic vehicle?

448. Why should you avoid selecting N while driving downhill in an automatic vehicle?

✓ It reduces engine braking and vehicle control.
It applies the parking brake.
It automatically selects a lower gear.
It increases engine braking.

Selecting N (Neutral) while driving downhill disconnects the engine from the driven wheels, reducing engine braking. Keep an appropriate drive or gear selected so you can maintain better control of the vehicle.

Neutral selection and downhill coasting in an automatic vehicle
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Is a high-visibility vest required in cars in Brussels?

449. Is a high-visibility vest required in cars in Brussels?

No.
✓ Yes.

Cars in Brussels are required to carry a high-visibility vest.

High-visibility vest for roadside use
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do at a railway crossing with warning lights flashing?

450. What should you do at a railway crossing with warning lights flashing?

✓ Stop before the crossing and wait until it is safe to proceed.
Drive around the barrier if the road ahead is clear.
Follow the vehicle ahead across the tracks.
Cross quickly before the train reaches the crossing.

Flashing warning lights mean a train may be approaching. Stop before the crossing and wait until the warning has ended and the crossing is clear.

Flashing warning lights at a railway crossing
AI-generated by Traffic-rules.com • WCIT • CC BY-SA