QuizTraffic rulesBrussels

Test your knowledge with our multiple-choice quiz. Learn from each answer and improve your understanding of the traffic rules and road signs of Brussels.

For informational purposes only. Always follow official regulations. Some content and images were created with AI assistance.


What does this vehicle-control symbol indicate?

451. What does this vehicle-control symbol indicate?

Air recirculation.
Windscreen wiper speed.
✓ Windscreen washer.
Rear window demister.

This symbol indicates the windscreen washer. Operating the control sprays washer fluid onto the windscreen and normally activates the wipers to help clean the glass.

Windscreen-washer control and spray symbol
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does pulling the lighting stalk towards you normally do?

452. What does pulling the lighting stalk towards you normally do?

Activate the hazard warning lights.
✓ Flash the main-beam headlights.
Activate the direction indicators.
Switch on the dipped headlights.

Pulling the lighting stalk towards you normally flashes the main-beam headlights. This briefly illuminates the main beam while the stalk is held or operated.

Lighting stalk used to flash the main-beam headlights
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Who generally has priority at an uncontrolled intersection in Brussels?

453. Who generally has priority at an uncontrolled intersection in Brussels?

Traffic approaching from the left.
The largest vehicle.
The vehicle travelling fastest.
✓ Traffic approaching from the right.

At an uncontrolled intersection in Brussels, you generally give way to traffic approaching from the right.

Vehicles approaching an uncontrolled junction from different directions
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
When should you select R (Reverse) in an automatic vehicle?

454. When should you select R (Reverse) in an automatic vehicle?

Before pressing the brake pedal.
While the vehicle is still moving forward slowly.
✓ After the vehicle has come to a complete stop.
Whenever you want to reduce speed.

Select R (Reverse) only after the vehicle has come to a complete stop. Selecting Reverse while the vehicle is still moving forward can damage the transmission.

Selecting Reverse in a stationary automatic vehicle
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you slow down before a sharp bend?

455. Why should you slow down before a sharp bend?

To reduce fuel consumption.
✓ To keep control of the vehicle.
To make the bend easier to see from a distance.
To make the steering feel lighter.

Sharp bends reduce your view and can make the vehicle harder to control, so you should slow down before entering the bend.

Vehicle approaching a sharp bend
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
How do you form an emergency corridor across three lanes in the same direction?

456. How do you form an emergency corridor across three lanes in the same direction?

All vehicles remain in the centre of their lanes.
✓ The left lane moves left and all other lanes move right.
Every lane moves toward the central reservation.
The centre lane stops while the other lanes continue.

When a queue forms, vehicles in the leftmost lane move as far left as possible. Vehicles in every other lane move right, creating an emergency corridor beside the leftmost lane.

Traffic forming an emergency corridor between lanes
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you be careful when driving beside a bus at a stop?

457. Why should you be careful when driving beside a bus at a stop?

The road surface is usually more slippery near bus stops.
A stopped bus always has priority over passing traffic.
✓ Passengers may step out or cross near the bus.
Bus stops usually have a lower speed limit.

Stopped buses can hide pedestrians, and passengers may cross unexpectedly. Slow down and be ready to react.

Vehicle passing a bus at a stop
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should cyclists do when an emergency vehicle with lights and siren approaches?

458. What should cyclists do when an emergency vehicle with lights and siren approaches?

Keep riding normally and let the driver find a way past.
Move aside quickly without checking around you.
✓ Stay alert and move to a safe position without obstructing it.
Stop immediately, even if you are in the traffic lane.

Emergency vehicles need a clear route. Move predictably and stop only where doing so is safe.

Cyclist near an approaching emergency vehicle
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Which roads are most likely to cause aquaplaning?

459. Which roads are most likely to cause aquaplaning?

Roads exposed to strong sunlight.
✓ Roads with standing water or deep puddles.
Straight roads in dry weather.
Roads with freshly painted road markings.

Standing water can collect in dips, ruts, or puddles, increasing the chance that tyres will lose grip.

Standing water on a road surface
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Are headlights required during the day in Brussels?

460. Are headlights required during the day in Brussels?

Yes.
✓ No.

Drivers in Brussels are not generally required to use headlights during normal daytime conditions.

Vehicle headlights used during daylight
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you check before starting a manual vehicle?

461. What should you check before starting a manual vehicle?

✓ That the gearbox is in neutral and the clutch is pressed.
That reverse gear is selected.
That the parking brake is released.
That first gear is selected and the accelerator is pressed.

Before starting a manual vehicle, make sure the gearbox is in neutral and press the clutch pedal. This helps prevent the vehicle from moving unexpectedly when the engine starts.

Clutch and gear checks before starting a manual vehicle
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Can a damaged Belgian category A or B licence normally be renewed through BelDrive?

462. Can a damaged Belgian category A or B licence normally be renewed through BelDrive?

Only after passing another practical test.
Only if it is a provisional licence.
Only after reporting it to the police.
✓ Yes, if the online eligibility conditions are met.

A damaged Belgian category A or B driving licence can normally be renewed through BelDrive if the applicant meets the online eligibility conditions.

Renewing a damaged Belgian driving licence through BelDrive
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
May you enter a railway crossing when traffic beyond it is blocked?

463. May you enter a railway crossing when traffic beyond it is blocked?

Yes, when no train is visible.
Only with the hazard lights on.
Only if you remain close to the vehicle ahead.
✓ No, if you are likely to stop on the crossing.

You must not enter a railway crossing when congestion may force you to stop on the tracks, even when the signals permit you to proceed.

Traffic queue beyond a railway crossing
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if the brake pedal feels unusually soft?

464. What should you do if the brake pedal feels unusually soft?

Continue until the brakes begin making noise.
✓ Stop safely and have the braking system inspected.
Reduce the tyre pressure to improve braking.
Press the accelerator harder before braking.

A soft brake pedal or increased stopping distance may indicate a serious brake fault. Do not continue driving normally until the system has been checked.

Brake-pedal check for a possible braking fault
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if you notice an unfamiliar fluid underneath your vehicle?

465. What should you do if you notice an unfamiliar fluid underneath your vehicle?

✓ Do not ignore it. Identify the fluid and arrange an inspection if necessary.
Top up the fluid levels and continue driving.
Wait until the vehicle develops another problem.
Ignore it if no warning light is showing.

Clear water from air conditioning can be normal, but oil, coolant, fuel, transmission fluid, or brake fluid may indicate a fault requiring urgent attention.

Fluid leaking underneath a parked vehicle
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
When must a driver wear a reflective vest after a motorway breakdown?

466. When must a driver wear a reflective vest after a motorway breakdown?

✓ When leaving the vehicle where stopping or parking is prohibited.
Only when passengers remain inside.
A safety vest is never required.
Only when repairing the vehicle at home.

On motorways and express roads, the driver must wear a reflective safety vest when leaving a broken-down vehicle that is stopped where stopping or parking is prohibited.

Driver wearing a reflective vest after a motorway breakdown
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this dashboard symbol indicate?

467. What does this dashboard symbol indicate?

Emergency braking.
Direction indicators.
✓ Hazard warning lights.
Brake warning.

This symbol indicates the hazard warning lights. When activated, all direction indicators flash simultaneously to warn other road users of a hazard or unusual situation.

Hazard warning light symbol on the dashboard
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
When must a pedestrian use a nearby pedestrian crossing in Belgium?

468. When must a pedestrian use a nearby pedestrian crossing in Belgium?

When one is within 50 metres.
Only when traffic is heavy.
Pedestrians never have to use one.
✓ When one is within approximately 20 metres.

A pedestrian must use a pedestrian crossing when one is located within approximately 20 metres.

Pedestrian approaching a nearby marked crossing
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this dashboard symbol indicate?

469. What does this dashboard symbol indicate?

Cruise control.
✓ Automatic start-stop system.
Engine-management warning.
Electronic stability control.

This symbol relates to the automatic start-stop system, which can switch the engine off temporarily while the vehicle is stationary and restart it when driving resumes. The exact colour and appearance may vary between vehicles.

Automatic start-stop system symbol on the dashboard
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do around a damaged electric or hybrid vehicle?

470. What should you do around a damaged electric or hybrid vehicle?

Disconnect exposed electrical components yourself.
Assume the system is safe once the vehicle is switched off.
Move damaged high-voltage parts away from the road.
✓ Keep clear of damaged high-voltage components and call trained assistance.

Electric and hybrid vehicles can contain dangerous high-voltage systems. Do not touch damaged cables, batteries, or electrical components.

Damaged electric vehicle and high-voltage safety risks
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Which vehicles are covered by driving licence AM?

471. Which vehicles are covered by driving licence AM?

✓ Mopeds over 25 and up to 45 km/h, and light quadricycles.
Cars up to 3,500 kg.
Any two-wheeled motor vehicle.
Motorcycles up to 125 cm³.

Category AM covers certain two- and three-wheeled mopeds with a maximum design speed above 25 km/h and not exceeding 45 km/h, as well as light quadricycles.

Category AM mopeds and light quadricycles
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you leave a much larger following distance on an icy road?

472. Why should you leave a much larger following distance on an icy road?

Because ice increases tyre wear.
To make the headlights work more effectively.
To prevent ice from forming on the windscreen.
✓ Because stopping distances can be much longer.

Tyres have much less grip on ice, so braking takes longer. Extra distance gives you more time to slow down safely.

Following distance between vehicles on an icy road
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you keep a safe distance from cyclists?

473. Why should you keep a safe distance from cyclists?

Cyclists always have priority over other traffic.
Cyclists cannot signal before changing direction.
✓ They may need space to avoid obstacles.
Cyclists must move aside whenever a vehicle approaches.

Cyclists may need to move around potholes, parked cars, or drains. Giving them enough space helps prevent dangerous situations.

Lateral clearance between a vehicle and a cyclist
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if passengers are distracting you while driving?

474. What should you do if passengers are distracting you while driving?

Turn around briefly so you can speak to them.
Ignore the traffic until the distraction has passed.
✓ Ask them to stop and keep your attention on the road.
Drive faster so you can finish the journey sooner.

Passengers can reduce a driver's attention and concentration. If their behaviour becomes distracting, ask them to stop and keep your focus on driving. If necessary, stop somewhere safe before dealing with the situation.

Passengers distracting a driver
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if a load extends beyond the vehicle?

475. What should you do if a load extends beyond the vehicle?

Let the load extend as far as necessary.
✓ Make sure it is legal, secure, and properly marked when required.
Leave it unmarked if it is easy to see.
Cover it with a cloth instead of marking it.

An extending load may create additional danger and may require specific markings or equipment under local rules.

Load projecting beyond a vehicle
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you avoid removing the coolant cap while the engine is hot?

476. Why should you avoid removing the coolant cap while the engine is hot?

✓ Pressurised hot coolant may escape and cause serious burns.
The cooling fan could stop working.
Opening it can reduce the engine oil pressure.
The thermostat may become damaged.

A hot cooling system may remain under pressure. Allow the engine to cool and follow the manufacturer's instructions before checking or adding coolant.

Coolant cap and the risk of hot pressurised coolant
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if the oil-pressure warning light stays on?

477. What should you do if the oil-pressure warning light stays on?

✓ Stop safely, switch off the engine, and seek assistance.
Add engine oil while the engine is still running.
Ignore it if the engine sounds normal.
Continue slowly until you reach a service station.

Low oil pressure can quickly cause severe engine damage. Stop as soon as it is safe, switch off the engine, and investigate the cause before continuing.

Oil-pressure warning illuminated on the dashboard
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
How long is a Belgian bank-card driving licence normally valid?

478. How long is a Belgian bank-card driving licence normally valid?

For life.
15 years.
20 years.
✓ 10 years.

A Belgian driving licence in bank-card format normally has an administrative validity of 10 years. The document must be renewed when this period expires.

Validity period of a Belgian bank-card driving licence
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this dashboard symbol indicate?

479. What does this dashboard symbol indicate?

✓ Parking brake applied.
Low tyre pressure.
Power-steering fault.
Brake pads worn.

This symbol indicates that the parking brake is applied. It should normally go out when the parking brake is fully released.

Parking-brake indicator symbol on the dashboard
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do first after a collision?

480. What should you do first after a collision?

Discuss who caused the collision before calling for help.
✓ Stop, check for danger and injuries, and call for help if needed.
Continue driving if the vehicles can still move.
Check the vehicle damage before checking for injuries.

Stop the vehicle, warn other traffic where appropriate, assess immediate danger and injuries, and contact the emergency services when needed. Exchange any details required by local law.

Vehicles stopped after a road collision
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
How should you position your vehicle beside a fuel pump?

481. How should you position your vehicle beside a fuel pump?

As close to the pump as possible, even if access is restricted.
With the fuel hose stretched tightly across the vehicle.
✓ With the fuel-filler side close enough for the hose to reach safely.
At an angle so the rear of the vehicle is closest to the pump.

Position the vehicle so the fuel filler is close to the pump and the hose can reach without being stretched tightly across or around the vehicle. Stop within the designated refuelling area and leave enough space to use the pump safely.

Vehicle positioned beside a fuel pump
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you avoid overtaking when approaching a pedestrian crossing?

482. Why should you avoid overtaking when approaching a pedestrian crossing?

✓ A pedestrian may be hidden by the vehicle ahead.
The road surface is usually more slippery near crossings.
The crossing may make it harder to judge your speed.
Crossing markings can make lane changes more difficult.

A vehicle slowing or stopping near a pedestrian crossing may be hiding someone who is crossing. Overtaking could put you directly into the pedestrian's path.

Vehicles approaching a pedestrian crossing
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What is the purpose of the manual parking brake?

483. What is the purpose of the manual parking brake?

To disengage the clutch.
✓ To help keep the vehicle stationary when parked.
To slow the vehicle during normal driving.
To select reverse gear.

The manual parking brake helps keep the vehicle stationary when parked. It is normally applied by pulling up the handbrake lever and released before driving away.

Manual handbrake lever in a vehicle
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you keep a safe following distance?

484. Why should you keep a safe following distance?

To keep traffic moving at a steady speed.
To make your vehicle easier to see ahead.
To reduce wear on the brakes.
✓ To have enough time to stop.

A safe following distance gives you enough time to react if the vehicle in front slows down or stops suddenly.

Gap between a vehicle and the traffic ahead
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if the engine-temperature warning shows overheating?

485. What should you do if the engine-temperature warning shows overheating?

Ignore it if the engine still sounds normal.
Open the coolant cap immediately to release heat.
Increase engine speed to improve coolant circulation.
✓ Stop safely, switch off the engine, and allow it to cool.

Continuing to drive an overheating vehicle can cause severe damage. Allow the engine to cool and follow the manufacturer's instructions.

Engine-overheating warning on the dashboard
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this vehicle-control symbol indicate?

486. What does this vehicle-control symbol indicate?

✓ Cabin temperature adjustment.
Cabin fan speed.
Seat heating.
Air conditioning.

This control adjusts the temperature of the air supplied to the cabin. Turning it towards the blue side lowers the selected temperature, while turning it towards the red side raises it.

Control for adjusting the cabin temperature
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do when a tram or another rail vehicle approaches?

487. What should you do when a tram or another rail vehicle approaches?

Continue because cars always have priority.
Expect the tram to give way to traffic from the right.
✓ Give way and clear the tracks as quickly as possible.
Overtake the tram on either side.

Road users must give way to rail vehicles and clear the tracks. A tram does not normally lose its priority because another road user approaches from the right.

Tram approaching other road traffic
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Who normally has priority at an unsigned intersection in Belgium?

488. Who normally has priority at an unsigned intersection in Belgium?

The driver on the widest road.
The driver approaching from the left.
✓ The driver approaching from the right.
The driver travelling fastest.

Belgium generally applies priority from the right at unsigned intersections. Signs, roundabout rules, and certain other situations can create exceptions.

Vehicles approaching an unsigned junction
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this vehicle-control symbol indicate?

489. What does this vehicle-control symbol indicate?

Central door locking.
Child safety lock.
Mirror adjustment.
✓ Window lock.

This control activates the window lock, which normally prevents passengers from operating their electric windows while leaving control with the driver.

Lock switch for passenger window controls
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Which vehicle type is mainly associated with driving licence C?

490. Which vehicle type is mainly associated with driving licence C?

Car.
✓ Truck.
Moped.
Bus.

Driving licence C is mainly associated with trucks. Category C1 covers smaller heavy vehicles, C covers larger heavy vehicles, and C1E and CE allow heavier trailers.

Driving licence card for category C
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Who normally has priority when you enter a motorway from an entry lane?

491. Who normally has priority when you enter a motorway from an entry lane?

Whichever vehicle reaches the merge point first.
✓ Traffic already travelling on the motorway.
Traffic entering from the entry lane.
The vehicle travelling at the higher speed.

You must adjust your speed and find a safe gap without forcing motorway traffic to brake or change direction.

Vehicle entering beside traffic already on a motorway
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What is aquaplaning?

492. What is aquaplaning?

When wet brakes become too hot to work properly.
When steering becomes heavier on a dry road.
✓ When tyres ride on a layer of water and lose contact with the road.
When water enters the engine and causes it to stop.

Aquaplaning occurs when water builds up between the tyres and the road, causing a loss of grip and control. The risk increases at higher speeds.

Water separating a tyre from the road surface
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
How should a passenger normally sit on a motorcycle?

493. How should a passenger normally sit on a motorcycle?

✓ Securely on the passenger seat with both feet on the footrests.
With one foot hanging down when travelling slowly.
Standing on the footrests when the road is uneven.
Sideways so they can get off more easily.

A motorcycle passenger should sit securely on the designated passenger seat, keep both feet on the footrests and avoid sudden movements that could affect the motorcycle's balance and stability.

Passenger seated on a motorcycle with feet on the footrests
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if your vehicle develops a serious fault while driving?

494. What should you do if your vehicle develops a serious fault while driving?

Accelerate to see if the fault disappears.
Stop immediately in the traffic lane.
✓ Keep control, reduce speed, and move to a safe place if possible.
Continue driving until the vehicle stops by itself.

Your first priority is to keep control of the vehicle. Reduce speed smoothly and move out of the path of traffic where possible, signalling when appropriate. Avoid harsh steering or braking unless necessary.

Vehicle stopped after developing a mechanical fault
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Which selector position prevents drive being transmitted to the wheels?

495. Which selector position prevents drive being transmitted to the wheels?

P (Park).
✓ N (Neutral).
D (Drive).
R (Reverse).

Select N (Neutral) when drive should not be transmitted to the wheels. Unlike Park, Neutral does not lock the transmission to prevent the vehicle from rolling.

Automatic gear selector with P, R, N and D positions
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Which control is normally used to switch on the dipped headlights?

496. Which control is normally used to switch on the dipped headlights?

The windscreen-wiper control.
The hazard warning switch.
The rear-window demister.
✓ The lighting control.

The lighting control is normally used to switch on the dipped headlights. Depending on the vehicle, it may be a rotary switch or part of a lighting stalk.

Lighting control for switching on dipped headlights
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this vehicle-control symbol indicate?

497. What does this vehicle-control symbol indicate?

Parking brake.
Boot release.
✓ Bonnet release.
Central door locking.

This control releases the bonnet so that it can be opened. A secondary safety catch under the bonnet normally has to be released before it can be fully raised.

Bonnet-release control and symbol
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you be cautious when following a vehicle carrying a loose load?

498. Why should you be cautious when following a vehicle carrying a loose load?

✓ Objects may fall onto the road.
The vehicle must stop whenever the load shifts.
Loose loads prevent the driver from using the mirrors.
The vehicle must always travel at a lower speed.

A poorly secured load can fall or shift suddenly. Keep extra distance and avoid following too closely.

Vehicle carrying an unsecured load ahead
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if your headlights fail while driving at night?

499. What should you do if your headlights fail while driving at night?

✓ Reduce speed and stop safely using any remaining lights or hazard lights.
Use hazard lights and continue to your destination.
Stop immediately in the traffic lane.
Continue slowly if the road is well lit.

Without effective headlights, you may not see hazards and other road users may not see you. Stop in a safe location as soon as possible.

Vehicle with failed headlights at night
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should the windscreen washer reservoir contain suitable washer fluid?

500. Why should the windscreen washer reservoir contain suitable washer fluid?

Washer fluid is needed only in freezing weather.
✓ It helps remove dirt, salt, insects, and spray from the windscreen.
The reservoir needs fluid only when the windscreen is visibly dirty.
Plain water always cleans the windscreen just as well.

A clear windscreen is essential for safe observation. Suitable washer fluid helps clean the glass and may provide protection against freezing in cold conditions.

Windscreen washer-fluid reservoir in a vehicle
AI-generated by Traffic-rules.com • WCIT • CC BY-SA