QuizTraffic rulesHungary

This interesting quiz helps you test your knowledge in a clear and visual way. With easy multiple-choice questions, you can quickly build confidence and learn new facts while keeping it simple, interactive, and fun.


What does AUTO on a windscreen-wiper control normally do?

1. What does AUTO on a windscreen-wiper control normally do?

Operates only the rear wiper.
Sprays washer fluid automatically.
Runs the wipers continuously at maximum speed.
✓ Operates the wipers automatically when rain is detected.

When AUTO is selected, a rain sensor can operate the windscreen wipers automatically and adjust their operation according to the amount of moisture detected on the windscreen.

AUTO setting on the windscreen-wiper control
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Which gear is normally used when moving off from a standstill?

2. Which gear is normally used when moving off from a standstill?

✓ 1st gear.
Neutral.
2nd gear.
Reverse.

1st gear is normally used when moving off from a standstill because it provides the greatest pulling power at low speed.

Manual gear lever and gear-selection pattern
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if a red warning light appears with an unusual noise?

3. What should you do if a red warning light appears with an unusual noise?

Ignore the noise if the warning light later goes out.
Wait until the next service to have it checked.
Stop only if another warning light appears.
✓ Stop safely, switch off the engine, and seek assistance.

A red warning combined with an unusual noise may indicate a serious fault. Continuing could cause damage or loss of control.

Red dashboard warning requiring the driver's attention
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this dashboard symbol indicate?

4. What does this dashboard symbol indicate?

Parking brake applied.
Low tyre pressure.
✓ Brake-pad wear warning.
Brake-system fault.

This symbol indicates that the brake pads may be worn and should be inspected. Continuing to drive with excessively worn brake pads can reduce braking performance and damage other brake components.

Brake-pad wear warning symbol on the dashboard
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do before rejoining traffic after a breakdown?

5. What should you do before rejoining traffic after a breakdown?

Check your mirrors only and pull out if they look clear.
✓ Check all around, signal, and enter only when there is a safe gap.
Pull out as soon as there is enough space for your vehicle.
Signal and expect approaching traffic to slow down.

Check mirrors and blind spots, signal clearly, and build up speed safely without causing approaching traffic to brake suddenly.

Vehicle preparing to rejoin traffic after a breakdown
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this dashboard symbol indicate?

6. What does this dashboard symbol indicate?

Rear fog lights.
Sidelights.
Front fog lights.
✓ Dipped headlights.

This symbol indicates that the dipped headlights are switched on. Dipped headlights illuminate the road ahead while limiting glare for other road users.

Dipped-headlight symbol on the dashboard
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if a tyre has a deep cut, bulge, or exposed cords?

7. What should you do if a tyre has a deep cut, bulge, or exposed cords?

✓ Stop using the tyre and arrange professional inspection or replacement.
Cover the damaged area and keep using the tyre.
Increase the tyre pressure and continue driving.
Move the damaged tyre to another wheel position.

Cuts, bulges, and exposed cords can indicate serious structural damage. The tyre may fail suddenly and should not be used normally.

Damaged vehicle tyre requiring inspection
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why is riding a bicycle after drinking alcohol dangerous?

8. Why is riding a bicycle after drinking alcohol dangerous?

Alcohol affects driving more than cycling.
✓ Alcohol can reduce your balance, coordination, judgement, and reaction time.
A helmet protects you from alcohol-related risks.
A small amount of alcohol improves balance.

Alcohol can make it harder to balance, steer, judge distances, and react to hazards. Riding a bicycle while impaired may also be against the law.

Alcohol consumption and bicycle-riding safety
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this dashboard symbol indicate?

9. What does this dashboard symbol indicate?

The seat belt is not fastened.
✓ A door is open.
The anti-theft system is active.
The parking brake is applied.

This symbol indicates that one or more vehicle doors are not fully closed. Check that all doors are securely shut before driving.

Door-open warning symbol on the dashboard
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if steam begins coming from underneath the bonnet?

10. What should you do if steam begins coming from underneath the bonnet?

Keep the engine running so the cooling system keeps working.
Continue driving slowly until the steam stops.
Pour cold water over the engine immediately.
✓ Stop safely, switch off the engine, and keep clear until it has cooled.

Steam can indicate an overheated and pressurised cooling system. Do not remove the coolant cap while the system is hot.

Steam rising from underneath a vehicle's bonnet
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if traffic stops and a driver waves you across?

11. What should you do if traffic stops and a driver waves you across?

Assume traffic in the other lanes will also stop.
Watch the stopped driver instead of the other traffic.
Check only the lane nearest to you.
✓ Check that all lanes are safe before crossing.

One driver may stop, but other vehicles may still be moving. Always check all lanes before crossing.

Driver waving a pedestrian across the road
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Who normally has priority when you enter a motorway from an entry lane?

12. Who normally has priority when you enter a motorway from an entry lane?

Traffic entering from the entry lane.
✓ Traffic already travelling on the motorway.
The vehicle closest to the end of the entry lane.
The vehicle travelling at the higher speed.

You must adjust your speed and find a safe gap without forcing motorway traffic to brake or change direction.

Vehicle entering beside traffic already on a motorway
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Where should the top of the head restraint normally be positioned?

13. Where should the top of the head restraint normally be positioned?

As low as possible.
Behind the neck only.
✓ Approximately level with the top of the head.
Level with the shoulders.

The head restraint should normally be adjusted so that its top is approximately level with the top of the head. This helps reduce the risk of neck injury in a collision.

Adjusting the head restraint to head height
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Which vehicle combination is covered by driving licence DE?

14. Which vehicle combination is covered by driving licence DE?

A category C vehicle with a heavy trailer.
✓ A category D vehicle with a trailer over 750 kg.
A category D1 vehicle without a trailer.
A category D vehicle with a trailer up to 750 kg.

Category DE covers combinations consisting of a category D towing vehicle and a trailer with a maximum authorised mass above 750 kg.

Bus and trailer covered by category DE
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if someone is injured in a road collision?

15. What should you do if someone is injured in a road collision?

Move them to a more comfortable position immediately.
Remove a motorcyclist's helmet to check for injuries.
Give them food or drink while waiting for help.
✓ Call for help and avoid moving them unless there is immediate danger.

Moving an injured person can worsen spinal or other injuries. Keep them calm, protect them from further danger, and provide first aid only within your level of training.

Assistance for an injured person after a road collision
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Is a warning triangle required in cars in Hungary?

16. Is a warning triangle required in cars in Hungary?

No.
✓ Yes.

Cars in Hungary are required to carry a warning triangle.

Warning triangle carried as vehicle safety equipment
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What is the main purpose of a motorway emergency lane or hard shoulder?

17. What is the main purpose of a motorway emergency lane or hard shoulder?

✓ For emergencies and breakdowns.
For overtaking slow-moving traffic.
For driving when the motorway is busy.
For stopping to check directions.

A motorway emergency lane or hard shoulder is primarily intended for emergencies and breakdowns, not normal driving. In some places it may be opened temporarily as a traffic lane when signs or signals specifically permit this.

Motorway hard shoulder beside the traffic lanes
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you keep a dog on a leash near traffic?

18. Why should you keep a dog on a leash near traffic?

✓ To prevent it from suddenly running into the road.
To make approaching vehicles drive more slowly.
To give the dog priority when crossing the road.
To make it easier for drivers to hear the dog.

Dogs can react unpredictably to vehicles, people, noises, or other animals. Keeping a dog under close control on a leash near traffic reduces the risk of it suddenly entering the road and endangering itself or other road users.

Pedestrian keeping a dog on a leash near traffic
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you switch on dipped headlights before entering a tunnel?

19. Why should you switch on dipped headlights before entering a tunnel?

To prevent the tunnel lights from becoming too bright.
To keep the windscreen from misting.
To reduce tyre wear inside the tunnel.
✓ To improve visibility and help other road users see you.

Tunnel lighting may be much darker than daylight. Dipped headlights help you see and make your vehicle more visible.

Vehicle using dipped headlights before entering a tunnel
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do when approaching a stop sign?

20. What should you do when approaching a stop sign?

Slow down and stop only if traffic is approaching.
Stop only after entering the junction.
✓ Come to a complete stop before proceeding.
Proceed if the vehicle ahead has already stopped.

A stop sign requires you to come to a complete stop at the required position. Check carefully for other road users and proceed only when it is safe.

Vehicle approaching a stop sign
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do when construction vehicles enter or leave the road?

21. What should you do when construction vehicles enter or leave the road?

Use your horn so the driver waits for you.
Drive closely behind it until there is room to pass.
Assume it will stop before entering your lane.
✓ Slow down and be prepared for them to move across your path.

Construction vehicles may move slowly, have limited visibility, or carry loose material. Give them time and space to manoeuvre.

Construction vehicle entering or leaving a road
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why can swerving suddenly to avoid a small animal be dangerous?

22. Why can swerving suddenly to avoid a small animal be dangerous?

Small animals usually move away before you reach them.
The tyres can be damaged by sudden steering.
✓ You may lose control or collide with another road user.
Swerving increases the vehicle's stopping distance.

A sudden swerve can take you into another lane, off the road, or into nearby traffic.

Small animal in the road ahead of a vehicle
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do after hitting an animal with your vehicle?

23. What should you do after hitting an animal with your vehicle?

✓ Stop safely, warn other traffic, and seek appropriate help.
Move the animal yourself before checking for traffic.
Leave the scene and report it later.
Continue driving if the vehicle still works.

After an animal collision, stop in a safe place if possible and protect yourself and other road users from further danger. Do not approach an injured or frightened animal unless it is safe to do so. Contact the appropriate police, road authority, animal service, or emergency service as required by the situation and local rules.

Vehicle stopped after a collision with an animal
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do before releasing the parking brake on a slope?

24. What should you do before releasing the parking brake on a slope?

✓ Make sure the vehicle is securely controlled before releasing it.
Select neutral and release all pedals.
Turn the steering wheel fully.
Press the accelerator fully.

Before releasing the parking brake on a slope, make sure the vehicle cannot roll unexpectedly. Use the service brake or, when moving off in a manual vehicle, establish the clutch biting point and sufficient power before releasing the parking brake.

Preparing to release the parking brake on a slope
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Which gear is used to drive a manual vehicle backwards?

25. Which gear is used to drive a manual vehicle backwards?

2nd gear.
✓ R (Reverse).
Neutral.
1st gear.

Select R (Reverse) when you need to drive a manual vehicle backwards. The vehicle should be stationary before Reverse is selected.

Manual gear lever and gear-selection pattern
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if a large animal suddenly enters your path?

26. What should you do if a large animal suddenly enters your path?

Swerve sharply into another lane.
✓ Brake firmly while keeping control of the vehicle.
Release the steering wheel and brake hard.
Turn suddenly toward the roadside.

If a large animal enters the road, brake firmly while keeping the vehicle under control. Avoid sudden swerving, as this can cause you to lose control or collide with other traffic.

Large animal entering a vehicle's path
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this dashboard symbol indicate?

27. What does this dashboard symbol indicate?

Sidelights.
✓ Direction indicators.
Main beam.
Hazard warning lights.

This symbol indicates that a direction indicator is operating. The flashing indicator shows the direction in which the driver intends to turn or change position on the road.

Direction-indicator symbol on the dashboard
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
How should tyre pressure normally be checked?

28. How should tyre pressure normally be checked?

Immediately after a long or high-speed journey.
Only by a certified maintenance service.
✓ When the tyres are cold, using the manufacturer's recommended pressure.
By looking at whether the tyres appear firm.

Tyre pressure rises as tyres become warm. Check them when cold and use the pressure specified on the vehicle label or in the owner's manual.

Checking a vehicle's tyre pressure
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you be extra careful at night?

29. Why should you be extra careful at night?

Road surfaces are usually more slippery.
Road markings become less important.
✓ Visibility is reduced.
Street lighting makes drivers less alert.

At night, it is harder to see pedestrians, cyclists, road markings, and hazards. Reduce speed and use the correct lights.

Road traffic in reduced night-time visibility
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
How should you normally hold the steering wheel while driving?

30. How should you normally hold the steering wheel while driving?

✓ With both hands in a balanced position.
With one hand at the top of the wheel.
With one hand resting on the gear lever.
With both hands together at the bottom.

Hold the steering wheel with both hands in a balanced position so that you can steer smoothly and react quickly. A position around nine and three o'clock generally provides good control.

Driver holding the steering wheel with both hands
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why does higher speed increase the risk of aquaplaning?

31. Why does higher speed increase the risk of aquaplaning?

The suspension becomes less effective at high speed.
✓ The tyres have less time to clear water from the road surface.
The vehicle becomes heavier as speed increases.
Higher speed increases the tyre pressure.

At higher speeds, the tyres may not disperse water effectively, making it easier for the vehicle to lose contact with the road.

Vehicle speed and aquaplaning on a wet road
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Which vehicle combination is covered by driving licence D1E?

32. Which vehicle combination is covered by driving licence D1E?

A category D bus with a heavy trailer.
✓ A category D1 vehicle with a trailer over 750 kg.
Any minibus with any trailer.
A category D1 vehicle with a trailer up to 750 kg.

Category D1E covers combinations consisting of a category D1 vehicle and a trailer with a maximum authorised mass above 750 kg.

Minibus and trailer covered by category D1E
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What is the main emergency number in Hungary?

33. What is the main emergency number in Hungary?

000.
111.
✓ 112.
911.

The main emergency number in Hungary is 112.

112 emergency telephone number
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why can bridges and overpasses become icy before nearby roads?

34. Why can bridges and overpasses become icy before nearby roads?

✓ Cold air circulates above and below them.
Road salt is less effective on bridges.
Traffic usually moves faster across bridges.
Their barriers trap cold air on the road surface.

Bridges lose heat from both their upper and lower surfaces, so they can freeze before roads built directly on the ground.

Icy surface on an exposed bridge
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do when a road worker directs traffic?

35. What should you do when a road worker directs traffic?

Obey only if traffic has completely stopped.
Wait for a police officer to confirm the signal.
✓ Follow the worker's signals and instructions.
Follow the normal traffic signs instead.

Authorised road workers may control traffic through a work zone. Watch carefully and follow their directions.

Road worker directing traffic
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Who should always wear a seat belt?

36. Who should always wear a seat belt?

✓ Everyone in the vehicle.
Only people in the front seats.
Only the driver.
Only people in seats without airbags.

Seat belts greatly reduce the risk of serious injury in a crash and should be worn by everyone in the vehicle.

Vehicle occupants wearing seat belts
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this vehicle-control symbol indicate?

37. What does this vehicle-control symbol indicate?

Rear window demister.
Windscreen washer.
✓ Windscreen wiper speed.
Automatic headlights.

This symbol relates to the windscreen wipers. The control allows the driver to select an appropriate wiping mode or speed for the amount of rain and visibility conditions.

Windscreen-wiper control for adjusting wiping speed
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What wording is commonly shown on give-way signs in Hungary?

38. What wording is commonly shown on give-way signs in Hungary?

STOP.
GIVE WAY.
YIELD.
✓ No wording.

Give-way signs in Hungary normally use the inverted triangular symbol without wording.

Wording used on give-way and yield signs
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do when livestock are on the road?

39. What should you do when livestock are on the road?

Sound the horn so the animals move aside.
Use the verge to pass the animals.
Follow closely so other traffic can overtake.
✓ Slow down and follow the instructions of the person controlling them.

Livestock may spread across the road, stop suddenly, or change direction without warning. Slow down, keep a safe distance, avoid sudden movements or loud noises, and follow any instructions from the person controlling the animals.

Livestock being moved along a road
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you slow down before a sharp bend?

40. Why should you slow down before a sharp bend?

To make the bend easier to see from a distance.
To reduce fuel consumption.
To prevent other vehicles from overtaking.
✓ To keep control of the vehicle.

Sharp bends reduce your view and can make the vehicle harder to control, so you should slow down before entering the bend.

Vehicle approaching a sharp bend
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why must you take wider turns when towing a trailer?

41. Why must you take wider turns when towing a trailer?

Wide turns prevent the trailer from swaying.
The trailer always follows the same path as the towing vehicle.
✓ The trailer follows a tighter path than the towing vehicle.
Wider turns decrease tyre wear.

Trailer wheels cut closer to the inside of a turn. Allow enough clearance from kerbs, signs, pedestrians, and other vehicles.

Towing vehicle and trailer negotiating a turn
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
Why should you avoid overtaking when approaching a pedestrian crossing?

42. Why should you avoid overtaking when approaching a pedestrian crossing?

The crossing may make it harder to judge your speed.
The road surface is usually more slippery near crossings.
✓ A pedestrian may be hidden by the vehicle ahead.
Vehicles use more braking distance near crossings.

A vehicle slowing or stopping near a pedestrian crossing may be hiding someone who is crossing. Overtaking could put you directly into the pedestrian's path.

Vehicles approaching a pedestrian crossing
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
How should a bicycle helmet fit?

43. How should a bicycle helmet fit?

High on the head with the straps loose.
Tilted back to keep your forehead clear.
Tight enough to feel uncomfortable.
✓ Level, secure, and comfortably fitted.

A helmet should sit level on the head and remain securely in place so it can provide effective protection.

Bicycle helmet positioned securely on the rider's head
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What word is commonly shown on STOP signs in Hungary?

44. What word is commonly shown on STOP signs in Hungary?

DUR.
PARE.
✓ STOP.
ALTO.

In Hungary, STOP signs commonly display the word STOP.

Different wording used on stop signs
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does this vehicle-control symbol indicate?

45. What does this vehicle-control symbol indicate?

Power-steering control.
✓ Steering-wheel adjustment.
Seat adjustment.
Cruise control.

This control adjusts the position of the steering wheel. Depending on the vehicle, the steering wheel may be moved up or down and forwards or backwards to obtain a safe and comfortable driving position.

Control for adjusting the steering-wheel position
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if another road user makes a mistake?

46. What should you do if another road user makes a mistake?

Use your horn repeatedly to express your frustration.
Keep your course and expect them to correct their mistake.
✓ Stay calm and avoid creating more danger.
Immediately overtake them to get past the situation.

Road users can make mistakes. Staying calm and reacting safely helps prevent crashes.

Driver responding to another road user's mistake
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
You may drive through an amber light without slowing down.

47. You may drive through an amber light without slowing down.

✓ False.
True.

An amber light means you should stop if you can do so safely. If you are too close to stop safely, continue through the junction with caution.

Vehicle approaching an amber traffic light
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What should you do if passengers are distracting you while driving?

48. What should you do if passengers are distracting you while driving?

Drive faster so you can finish the journey sooner.
Continue the conversation while watching the road.
Ignore the traffic until the distraction has passed.
✓ Ask them to stop and keep your attention on the road.

Passengers can reduce a driver's attention and concentration. If their behaviour becomes distracting, ask them to stop and keep your focus on driving. If necessary, stop somewhere safe before dealing with the situation.

Passengers distracting a driver
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
How should cyclists cross railway or tram tracks?

49. How should cyclists cross railway or tram tracks?

Increase speed so the wheels cannot get caught.
Keep the wheels parallel with the rails while crossing.
Brake firmly while the front wheel is on the rail.
✓ Cross at a safe angle, as close to perpendicular as possible.

A bicycle wheel can become trapped in a rail groove. Crossing at a wider angle reduces this risk.

Cyclist crossing rails in the road
AI-generated by Traffic-rules.com • WCIT • CC BY-SA
What does turning a traditional ignition switch to OFF normally do?

50. What does turning a traditional ignition switch to OFF normally do?

✓ Switches off the engine and ignition systems.
Selects accessory power.
Releases the parking brake.
Operates the starter motor.

Turning a traditional ignition switch to OFF switches off the engine and ignition systems. The key can then normally be moved to the LOCK position and removed.

OFF position on a traditional ignition switch
AI-generated by Traffic-rules.com • WCIT • CC BY-SA